Máy quấn ống & máy đóng gói cuộn ống cho thép

Tóm tắt điều hành: This page is for anyone packing large pipe, hose or cable coils and deciding how to automate the job. It explains what the machine in the video actually does, how a rotating arm and clamp system work around a pipe coil, and what to verify with a supplier before you commit. The page title says “hose wrapping machine,” and it is worth being precise: the footage shows a coil being banded by rotating arms rather than wrapped in film. The video below shows one running cycle, and the photos on this page are product-library reference images, not stills from the clip.

Trên trang này: Trang này giúp bạn quyết định điều gì · What the machine in the video does · Strapping versus wrapping · Những điều cần kiểm tra trước khi mua hàng · Video hiển thị nội dung gì · Danh sách kiểm tra xác minh của người mua · FAQ · Đọc liên quan · Bước tiếp theo

Trang này giúp bạn quyết định điều gì

Large coils of pipe, hose and cable need a stable package before they travel. The machine in this video bands the coil from the outside, holding it together for handling and shipment. This page separates what the footage reliably shows from what the page title might suggest, so you can ask a supplier the right questions about your own coils.

The title mentions “hose wrapping machine,” but packing a coil is not always wrapping with film. In this clip the action visible is banding by rotating arms rather than film application. Confirm which operation your line needs before comparing machines.

What the machine in the video does

The machine in the video holds a large coil in a centre fixture and works on it with a rotating arm and clamp system. The coil turns while mechanical parts move across it, applying what appears to be a band or strap that holds the coil together. A smaller spool on the right side is likely the source of the banding material.

Visually the machine has a light-green metal frame with yellow parts, arranged in an L-shaped layout. The main work area is the centre, with a yellow ladder-like structure on the left for maintenance or operation.

Strapping versus wrapping

Two different packing operations are commonly confused, and the video shows which one this machine performs.

• Strapping or banding (seen here): metal or plastic band is drawn tightly around the coil to hold its turns together. This is what the rotating arm and clamps appear to apply in the video.
• Film wrapping (not clearly shown): stretch film is wound around the product surface. The video does not show a film being drawn over the coil surface.

So the machine’s visible action is banding the coil rather than wrapping it in film. If your plan assumes a film cover, that operation is not what the clip demonstrates and must be confirmed separately with the supplier.

Những điều cần kiểm tra trước khi mua hàng

The video shows the running machine, not the specification. Nothing on screen states coil size range, band type, cycle time or throughput, so those figures come from the supplier in writing. Start with six facts:

• Phong bì cuộn — Đường kính ngoài tối thiểu và tối đa, chiều cao và trọng lượng của cuộn dây.
• Băng bó — the band material, width, thickness and the expected tension.
• Thời gian chu kỳ — time to band one coil or pallet of coils.
• hoạt động — whether wrapping with film is also available on this machine.
• Tải — how the coil is loaded onto the centre fixture and removed.
• Gói an toàn — các biện pháp dừng khẩn cấp, bảo vệ, hàng rào và chứng nhận.

Mỗi mục đều ảnh hưởng đến quyết định mua hàng. Danh sách kiểm tra bên dưới tóm tắt lại chúng thành một yêu cầu duy nhất mà bạn có thể gửi nguyên trạng.

Video hiển thị nội dung gì

What the video shows is one running cycle on a coil packing machine. A large dark ring coil is held in the centre fixture of the machine.

As the machine runs, the rotating arm and clamp system moves across the coil while the coil turns, applying a band or strap that weaves around the outside. A smaller spool on the right side is visible and appears to feed the banding material. The cycle runs continuously, and no finished product is shown leaving the machine.

What the video does not show is just as important. It does not show the band being cut or sealed, film being applied, coil size range, band width or tension, cycle time, model, power or voltage. It shows no loading or unloading, no control panel, no emergency stop, and no guarding beyond the structural frame.

Các ghi chú quan sát trực tiếp từ các khung hình được lấy mẫu tuân theo một quy tắc: chỉ những gì có thể nhìn thấy mới được ghi lại, và không có gì được suy đoán từ âm thanh, bởi vì đoạn clip có nhạc nền và không có lời thuyết minh.

The machine has a light-green metal frame with yellow parts, in an L-shaped layout, with the main work area in the centre. A smaller spool on the right side appears to feed banding material, and a yellow ladder-like structure on the left may be for maintenance or operation.

The product is a large dark ring coil with a smooth, slightly reflective surface, held near the centre of the machine and turning with its orientation changing as the banding proceeds. The photos on this page are product-library reference images from the manufacturer, not stills from the clip.

Danh sách kiểm tra xác minh của người mua

Gửi cho nhà cung cấp: Please confirm for the coil packing machine shown in the demonstration video: (1) the minimum and maximum coil outer diameter, height and weight; (2) the band material, width, thickness and tension; (3) the time to band one coil or pallet; (4) whether film wrapping is also available on this machine, since the footage shows banding rather than film wrapping; (5) how the coil is loaded and removed; (6) fitted safety devices including emergency stops, guarding, fencing and certifications.

FAQ

Does the video show film wrapping? No. The footage shows a coil being banded by a rotating arm and clamp system. Film application is not visible, so confirm with the supplier whether wrapping is available.

What coils does the machine handle? The video does not show limits. Ask for the minimum and maximum coil outer diameter, height and weight.

Có bảng điều khiển không? None is visible in the video. Control functions must be confirmed with the supplier.

Đọc liên quan

• Dây chuyền đóng gói cuộn dây tự động
  
• Máy đóng đai thép cuộn
  
• Máy quấn cuộn dây
  
• Máy đóng gói cuộn ống
  
• Máy đóng gói cuộn ống và cuộn ống
  
• Automatic Pipe Coiling and Strapping Machine

Bước tiếp theo

Hãy gửi cho nhà cung cấp kích thước, trọng lượng và mục tiêu sản lượng cuộn dây của bạn, đồng thời yêu cầu sáu số liệu xác minh từ danh sách kiểm tra ở trên.

Then confirm whether film wrapping is available, because the footage shows banding only and your package may need both.

Then ask how the coil is loaded and removed, since no loading or output appears in the clip and it decides how the machine fits your line. Use the trang liên hệ để bắt đầu cuộc trao đổi đó.

Lần cuối cập nhật: 24/09/2026

Ngày xuất bản: 24/09/2026