Máy quấn màng căng quỹ đạo ngang và máy quấn ngang

Tóm tắt

Long products cannot be spun on a turntable, and wrapping them by hand gives loose, uneven film. Our horizontal orbital stretch wrapper keeps the product still on a conveyor and turns the film around it: a ring carrying the film roll rotates while the conveyor moves the product through it. The result is a tight spiral wrap along the whole length, at the same overlap every time.

A long grey metal box rides on a green belt conveyor into a large white ring. A side guide on the in-feed keeps it straight, and the control box stands beside the ring. The belt protects the painted surface while the box passes through.

Mục lục

Tại sao lại cần quỹ đạo cho các sản phẩm dài?

Boxes, cabinets, panels, pipes and profiles are long in one direction. On a turntable they would need a very large table and would swing a wide circle. In a horizontal wrapper the product only moves straight, so the machine is narrow and fits into a conveyor line. All four long sides are covered, which keeps dust and scratches off during transport.

Cách chiếc nhẫn quấn quanh

  1. A photocell sees the front of the product on the in-feed conveyor.
  2. The film tail is held and the ring starts turning.
  3. The conveyor carries the product through the ring at a set speed, so the film lays on as a spiral.
  4. At the end of the product the ring stops in its reset position and the film is cut.
  5. The out-feed conveyor carries the wrapped product away.

Các thành phần chính

  • Nhẫn: driven by rubber wheels with adjustable friction; ring speed set by inverter, with soft start.
  • Giá đỡ phim: adjustable film tension, taking stretch film or other wrap material.
  • Băng tải: motor and gearbox drive, speed set by inverter, with a surface that protects the product.
  • PLC: photocell positioning, fault alarm and a separate control panel.
  • Auto cutter and feeder: a mechanical hand holds the film tail at the start and cuts it at the end, for unmanned operation.
  • Hold-down: for light or flat-sided boxes, top or side press rollers keep the product from lifting while the film pulls on it; whether they are needed is confirmed at quote.

Dữ liệu máy

Mục E300 (smaller bundles)
Gói OD 100 tầm 300 mm
Chiều dài bó trên 1,000 mm
Trọng lượng máy 15–100 kg
In-feed / out-feed conveyor 2,000 mm each, motor-driven
Tốc độ 6–12 m / phút
chồng chéo 10% –90%

A box of the size shown needs a larger ring than the E300; ring size, conveyor length and speed for your product are confirmed at quote.

Setting overlap and speed

Advance per ring turn = film width × (1 − overlap)

Conveyor speed = advance per turn × ring rpm

Example only: with 100 mm film and 50% overlap the product advances 50 mm per ring turn. At 60 r/min that is 50 × 60 = 3,000 mm per minute, or 3 m/min. Raising overlap to 70% cuts the advance to 30 mm and the speed to 1.8 m/min at the same ring speed, so overlap is set from how much protection the product needs.

Film per product

Film length ≈ (product length ÷ advance) × perimeter

Example only: a box 2,000 mm long with a 400 × 300 mm section has a perimeter of 2 × (400 + 300) = 1,400 mm. At a 50 mm advance there are 2,000 ÷ 50 = 40 turns, so about 40 × 1.4 = 56 m of film per box, before pre-stretch.

Danh sách kiểm tra lựa chọn

  1. Product section (width × height) and length range.
  2. Product weight.
  3. Số lượng sản phẩm mỗi giờ.
  4. Film type: stretch, PE, paper or bubble film.
  5. Surface to be protected.
  6. Upstream and downstream conveyors.

Sự An Toàn

We design to EN ISO 12100:2010 for risk assessment, EN 415-10 for packaging machine safety and EN 60204-1 for the electrical equipment. A guard rail keeps people away from the turning ring, and the ring resets to its start position after each product.

Câu hỏi thường gặp về kỹ thuật

Q: Can it wrap different lengths without changing settings? A: Yes. The photocell finds the start and end of each product.

Q: Will the ring scratch painted products? A: The film is the only thing that touches the product; the belt conveyor carries it.

Q: Can it wrap only part of the length? A: Yes, the PLC can wrap set zones.

Bước tiếp theo

  1. Send your product section, length, weight and pieces per hour Gửi đến info@fhopepack.com.
  2. Chúng tôi đo kích thước the ring, conveyors and film carriage.
  3. Chúng tôi trả lời trong vòng 24 giờ Kèm theo đề xuất và báo giá.

nguồn

  • FHOPE product pages: horizontal orbital stretch wrapper; E300 horizontal stretch wrapper
  • EN ISO 12100:2010; EN 415-10; EN 60204-1

Lần cuối cập nhật: 20/10/2026

bài viết liên quan

Đặt cuộc gọi
Đặt cuộc gọi