Hiện có sẵn trên toàn thế giới

Coil Packing Terms Explained: A Buyer\'s Glossary

A glossary of coil packing, wrapping, strapping and stacking terms — machine vs. line, ring vs. C-ring, eye-through wrapping, overlap, VCI, FAT/SAT, and recipe — defined so buyers and suppliers mean the same thing.

Nhận báo giá miễn phí Xem bản demo

Chứng nhận CE

ISO 9001

2 năm bảo hành

Glossary: Coil Packing, Wrapping, Strapping and Stacking Terms

98%

Tỷ lệ hiệu quả

2 Năm

Bảo hành đầy đủ

Glossary: Coil Packing, Wrapping, Strapping and Stacking Terms

A shared vocabulary prevents the most expensive mistake in a coil packing project: buying the wrong scope because the buyer and supplier used the same word for different things. This glossary defines the terms used when discussing an dây chuyền đóng gói cuộn dây tự động.

System and Machine Terms

Hạn	Định nghĩa
Máy quấn cuộn	A machine that applies protective material around a coil. It performs the wrapping action but does not necessarily include handling, strapping, weighing, labeling, or stacking.
Máy đóng gói cuộn dây	A broad term that may mean a single wrapper or a complete packaging system. Confirm the scope before comparing quotations.
Dây chuyền đóng gói cuộn dây	An integrated system that connects handling, wrapping, strapping, weighing, labeling, and stacking into one controlled flow.
Máy đóng đai cuộn	A machine that applies steel or PET strapping around the coil or bundle to hold the package together.

Naming the stations first keeps "machine," "system," and "line" from meaning different things to the buyer and supplier.

The image shows a steel coil packaging line for slit strip. Naming the stations first keeps "machine," "system," and "line" from meaning different things to the buyer and supplier.

Wrapping Mechanisms

Hạn	Định nghĩa
Bao bì xuyên thấu	Wrapping in which the material passes through the coil eye to cover the inner bore and full cross-section.
Bộ bao bọc quỹ đạo	A wrapper that rotates around the product; may also be called a horizontal or ring wrapper.
bao bọc vòng	A wrapper with a closed ring that rotates around the coil.
Bộ quấn vòng chữ C	A wrapper with an opening in the ring, allowing side loading or access without a closed loop.

Orientation and Material Flow

Hạn	Định nghĩa
Hướng cuộn dây	The direction of the coil eye relative to the floor: eye to sky (vertical) or eye to wall (horizontal).
Down-ender / upender	Equipment that changes the coil orientation, usually between vertical and horizontal.
cửa quay	A rotating storage device that holds coils so they can be separated and fed one by one.
Đệm	Storage positions between stations that absorb differences in release and cycle time.

Orientation, upender, turnstile, and buffer describe what happens between the stations in this flow.

The image shows another section of the steel coil packaging line for slit strip. Terms such as orientation, upender, turnstile, and buffer describe what happens between the stations in this flow.

Watch a silicon steel coil packaging line with upender and strapping system:

Wrapping Materials and Coverage

Hạn	Định nghĩa
chồng chéo	The portion of the film width that covers the previous layer, usually expressed as a percentage.
VCI	Volatile corrosion inhibitor, a material that releases a protective vapor to reduce corrosion risk.
Stretch film / LLDPE	Elastic plastic film used to wrap and secure coils.

Overlap and material terms define what the applied film must do for the coil surface, route, and storage time.

The image shows a steel coil packaging line with an operator at the equipment. Overlap and material terms define what the applied film must do for the coil surface, route, and storage time.

Acceptance and Control Terms

Hạn	Định nghĩa
FAT	Factory acceptance test: verification of the equipment at the supplier's facility.
SAT	Site acceptance test: verification of the equipment after installation at the buyer's site.
LOTTO	Lockout-tagout: a procedure to isolate energy sources before maintenance or manual intervention.
Recipe	The recorded set of machine parameters, materials, and inspection steps for one packaging outcome.

FAT, SAT, LOTO, and recipe define what the line must prove before handover — and how it is operated safely afterwards.

The image shows the steel coil packaging line equipment for slit strip. Acceptance terms such as FAT, SAT, LOTO, and recipe define what the line must prove before handover and how it is operated safely afterwards.

Bước tiếp theo thiết thực

Use this glossary when writing your RFQ so every supplier answers the same scope. If a term is ambiguous, define it in the project document, and keep the same definitions when you review responses for the dây chuyền đóng gói cuộn dây tự động.

Chi tiết hình ảnh

Glossary: Coil Packing, Wrapping, Strapping and Stacking Terms - Detail 1

Nhấn vào đây để phóng to

Glossary: Coil Packing, Wrapping, Strapping and Stacking Terms - Detail 2

Nhấn vào đây để phóng to

Glossary: Coil Packing, Wrapping, Strapping and Stacking Terms - Detail 3

Nhấn vào đây để phóng to

Glossary: Coil Packing, Wrapping, Strapping and Stacking Terms - Detail 4

Nhấn vào đây để phóng to

Xem nó trong hành động

Xem cách nó hoạt động

Khám phá cách các giải pháp đóng gói tự động của chúng tôi tối ưu hóa hiệu quả dây chuyền sản xuất của bạn. Video này minh họa hoạt động liền mạch được thiết kế để bảo vệ sản phẩm tối đa.

Thông lượng cao

Lên đến 60 cuộn dây mỗi giờ

Chất lượng phù hợp

Mỗi lớp bọc đều đáp ứng tiêu chuẩn kỹ thuật.

Báo giá