Hose Coil Stretch Wrapping Machine

Name: เครื่องพันสายยางยืด
Uploaded: 2020-01-02T06:51:46+00:00
Duration: 1 min 46 s
Description: > **Executive summary** > > A hose coil stretch wrapping machine holds a wound hose or cable coil on a rotating base and wraps it in stretch film from a film roll mounted above. The operator places the coil on the base while the safety fence is open, the fence…

บทสรุปผู้บริหาร

A hose coil stretch wrapping machine holds a wound hose or cable coil on a rotating base and wraps it in stretch film from a film roll mounted above. The operator places the coil on the base while the safety fence is open, the fence closes and the machine runs automatically, and the wrapped coil is lifted off when the cycle finishes. Coil size, film choice and cycle time are confirmed per project.

Why hose coil stretch wrapping

A coiled length of hose or cable can loosen at the outer turns, pick up dirt and get scratched while it is handled or stored. Wrapping the coil keeps the wound layers tight and gives the surface a clean protective cover before it moves on.

The film is applied in one pass while the coil turns, so the coil is covered without hand-held film or trapped air. Coil size and film choice are confirmed per project.

เครื่องจักรทำอะไร

The machine is a vertical stretch wrapping unit arranged around a rotating base. The operator places a wound hose or cable coil on the base, and the machine turns the coil while stretch film unwinds from a roll above and wraps around it.

When the wrap is complete the machine stops and the wrapped coil is taken off the base. Coil geometry and the height of the wrap are confirmed per project.

Rotating base and top film feed

A rotating base at the bottom carries the coil upright, and fixtures on the base hold the coil centred while it turns. A film roll is mounted above the machine and the film is guided down through rollers to the coil before the cycle starts.

As the base rotates the coil, the film is laid around the outside from the top of the coil to the bottom, covering the whole surface. Film width and base speed are confirmed per project.

รอบการห่อและการควบคุม

The cycle starts with the coil on the base and the safety fence open. The operator closes the fence, starts the machine, and the coil turns under the film feed while the film unwinds from the top roll. When the film has covered the coil the machine stops and the operator removes the wrapped coil.

A control cabinet beside the machine carries the cycle start, a running indicator and a red stop button, and the machine runs through the wrap automatically once started. Cycle time and film tension are confirmed per project.

สิ่งที่ภาพวิดีโอแสดงให้เห็น

Our footage shows an operator carrying a large pink hose coil to the machine and placing it on the rotating base while the yellow safety fence is open. The fence closes, the machine runs automatically, and transparent stretch film unwinds from the upper roll and covers the coil as the base turns it.

When the wrap is finished the machine stops and the operator prepares to take the wrapped coil off. It is a general demonstration, so your coil size, film choice and cycle time are confirmed with us per project.

การกำหนดค่าทั่วไป

ตัวเลขด้านล่างแสดงขอบเขตการออกแบบเชิงฟังก์ชันมากกว่าค่าตัวเลข และได้รับการยืนยันในแต่ละโครงการ

พารามิเตอร์	ช่วงราคาทั่วไป โปรดตรวจสอบอีกครั้งในแต่ละโครงการ
โหลด	wound hose and cable coils, upright on a rotating base
ฟิล์ม	stretch film fed from a roll above the machine
ห่อ	film laid from top to bottom as the base turns
ถือ	fixtures keep the coil centred on the base
การปกป้อง	mesh safety fence closed while the machine runs
โอน	manual load and remove, or conveyor link, per project
Control	cycle start, running indicator and red stop button
แหล่งจ่ายไฟฟ้า	ไฟฟ้า 380 โวลต์ 3 เฟส 50 เฮิรตซ์ หรือ 220 โวลต์ 1 เฟส สำหรับเครื่องจักรขนาดเล็ก เลือกใช้ตามแต่ละโครงการ

รายการตรวจสอบการคัดเลือก

คำถาม	ยืนยันตามแต่ละโครงการ
ช่วงคอยล์	diameter, height, wound weight
ฟิล์ม	ความกว้าง ความหนา ความยืดหยุ่น
วงจร	wrap time, number of layers
กำลังโหลด	manual feed or automatic feed and removal
เว็บไซต์	floor space around the machine
แหล่งจ่ายไฟฟ้า	แรงดันไฟฟ้า เฟส และความถี่ ณ สถานที่

การปฏิบัติงานและความปลอดภัย

Place the coil on the base, close the safety fence, start the cycle, and remove the wrapped coil when the machine stops. Keep hands clear of the moving base, the film feed and the holding fixtures while the machine runs.

Routine checks cover the base drive, the film roll and guides, and the control cabinet, per the machine manual. Confirm the coil is centred on the base before each cycle.

คำถามที่พบบ่อยด้านวิศวกรรม

Q: What does this machine do? A: It wraps a wound hose or cable coil in stretch film by turning the coil on a rotating base under the film feed.

Q: How does the film get around the coil? A: The film unwinds from a roll above the machine and is laid around the coil through roller guides as the base turns.

Q: Do we need to hold the coil by hand? A: The footage shows manual loading, while fixtures hold the coil on the base during the run; automatic feed can be arranged when the line speed requires it.

Q: Can it wrap different coil sizes? A: The base and film feed adapt within the machine range, and your coil diameter and height are confirmed per project when you send the details.

Q: What does it suit? A: Wound hose and cable coils when they need a tight, clean wrap before storage, transport or the next process.

ขั้นตอนต่อไป

Email us at info@fhopepack.com with your coil diameter and film choice.
เราจะส่งใบเสนอราคาสำหรับการห่อขดสายยางภายใน 48 ชั่วโมง
We confirm the base and film feed for your coils.

แหล่งที่มาและมาตรฐาน

FHOPE hose coil stretch wrapping machine demonstration video. Reviewed as a general demonstration; coil size, film choice and cycle time confirmed per project.

แก้ไขล่าสุด: 2026-10-12