Обмотчик паллет с поворотным рычагом FHOPE-R100 и пленкорезом

Резюме

На видео показано обмотчик поддонов с поворотным рычагом wrapping a tall, stationary load: the yellow arm rotates around a palletized box while film is paid out from a side roll in a спиральный узор. The load never turns — the arm moves around it, which suits tall, heavy, or unstable loads that should not be spun. At the end of the cycle a film cutter at the arm head trims the film before the arm returns to its start position.

Что показано на видео

The video is a factory demonstration with background music and no narration. Timing below is approximate, based on a frame-by-frame sample of the clip. It demonstrates automated упаковка поддонов of a tall load without moving the load itself.

What to notice in the footage

• load stays still for the whole cycle — only the arm moves.
• The film is applied spirally from bottom to top (or top guidance toward the sides), so a tall box is covered in one continuous pass.
• cut happens automatically at the arm head, so there is no manual tear-off step after wrapping.

Rotary arm vs turntable: what changes

Это вращающийся рукавный оберт, not a turntable wrapper. The difference matters when you choose a machine for tall or unstable loads.

The table reflects what is visible in the video plus general equipment principles. Specific reach and capacity figures for the FHOPE-R100 must be confirmed by the manufacturer.

Заметки, сделанные непосредственно во время наблюдений (на основе анализа фреймов)

• Машина: желтый metal structure with a белая колонна frame; the rotating arm and its film application/cutting head are at arm level; a кинопленка stands on the right side of the machine; a floor-mounted base supports the assembly, with cables and air lines running between parts.
• Продукт: a large white rectangular box (taller than it is wide, roughly 1.5× as tall as it is wide) на деревянный поддон, partly covered earlier, with a brown/wooden detail visible near the top.
• Процесс: arm approaches → positions at the load side → rotates around the load while releasing film → spiral coverage builds up → film is вырезать → arm returns.
• Управление: no readable screen, buttons, or indicator panel is visible; only a dark control box with wiring connections appears near the base.
• Безопасность: no guard fence, emergency stop, light curtain, warning sign, or interlock is observed in the footage.

Text discipline note: no readable text, label, or watermark was identified in any sampled frame.

Области применения данной машины

Based on how the machine works in the video, this type of rotary arm wrapper fits workloads such as:

• Tall, boxed products that would risk toppling if spun on a turntable.
• Тяжелые продукты where a rotating platform and its bearing add cost and risk.
• Products already on pallets that stay at one position while the arm wraps around them.
• Semi-automatic lines where an operator places the load and the machine finishes the wrap.

Эти derived evaluation points (inference from the observed motion), not specifications from the video.

Чего не показано в видео

• Rated load size and weight машина может справиться.
• Время цикла за загрузку.
• Film type, width, thickness, or roll capacity.
• Machine dimensions or footprint, and required working clearance around the arm.
• Power and air requirements (voltage, frequency, air pressure).
• Model markings or certifications — the FHOPE-R100 nameplate is not readable in the footage.
• Обслуживание needs or spare-part policy.
• Гарантийные и послепродажные условия.

Controls and safety: what we could and could not see

• Видео действительно не clearly show a control panel, an аварийной остановки, чтобы guard fence, чтобы световой занавес или предупреждающие знаки.
• Только dark control box with wiring is visible near the machine base.
• Because the footage shows an open working area around a moving arm, confirm with the supplier which safety features are fitted перед покупкой.
• The arm’s rotation zone is a hazard area; operators should stay clear while the cycle runs.

These are honest boundaries based on the frames, not a claim that the machine lacks safety equipment.

Что нужно уточнить у производителя?

1. Загрузка конверта — maximum height, depth, width, and weight per load.
2. Спецификация пленки — supported film widths, thickness, and whether pre-stretch is available.
3. Время цикла — wraps per hour at your typical load size.
4. Управляет тем, — wrap count, tension, and height settings; whether a readable HMI is available.
5. Пакет безопасности — emergency stop, fence/light curtain options, and compliance certificates.
6. Установка — footprint, clearance for the rotating arm, and air/power hookup.

Часто задаваемые вопросы

Is the film cutter really automatic? In the video the film is cut at the arm head at the end of the cycle, so no manual tear-off appears. Confirm the cutter type (hot knife or mechanical) with the supplier.

Why does the load not rotate? The arm rotates around a стационарная нагрузка. This is the core idea of a rotary arm wrapper: unstable or tall loads stay still, so they are less likely to shift or topple.

What can this wrapper package? На видео показано tall rigid box on a pallet. For non-rigid or oddly shaped products, check load stability and film behavior with the supplier.

Каково время цикла? Cycle time depends on load size, height, and wrap count, and is не показаны in the video. Ask for a cycle time estimate at your load dimensions.

Does the machine need compressed air? Air usage depends on the cutter and tension system. Confirm air pressure requirements from the datasheet.

Is film loading manual? The roll is mounted on the machine’s right side and must be replaced when empty. Check the roll weight and change-over procedure with the supplier.

Связанное чтение

• Stretch Wrapping Machine — FHOPE main page (keyword internal link from the original article: упаковка поддонов)
• Машина для упаковки поддонов с поворотным рычагом
• Стретч-пленка для паллет: технологии и лучшие практики.
• Автоматическая машина для обмотки паллет: полное руководство
• Машина для упаковки паллет с автоматической резкой пленки
• Поворотный конвейер для упаковки паллет

Источник и метод

• Источник видео: YouTube g4IKZWShbTw, embedded in the original article.
• Метод анализа: the footage was sampled into frames and analyzed with a local vision model (Qwen3-VL-30B, OMXL), frame by frame, in batches.
• аудио: the video has background music and no narration, so no transcript was used.
• Границы: every description above is matched to visible frames; figures not visible in the video are marked as “confirm with the manufacturer”.

Следующий шаг

Обратитесь в отдел продаж FHOPE для получения дополнительной информации. load-envelope check — send your typical pallet size and weight so they can confirm whether the FHOPE-R100 rotary arm wrapper fits your line. Use the контактная страница начать разговор.

Последнее обновление: 2026-09-02.