Rezumat This video shows a cable coil wrapping machine in operation: a green cable coil is held on a rotating yellow turntable, wrapped under film, and then a robotic arm places a yellow logo/label element onto the coil’s side before the finished coil leaves the work area. The footage also pans across the wider line, showing racks of finished coils in green, red, and blue. The video demonstrates the process visually only — no output rates, dimensions, or control details are shown or narrated.
De ce contează această mașină
If you buy or produce cable on coils, you already know the last step — wrapping the coil and applying a brand label — is where manual work quietly adds up. Every coil needs consistent film tension, a clean wrap, and a logo or label placed in the same spot. Do that by hand, hundreds of times a day, and the results drift: loose wraps, crooked labels, inconsistent presentation.
The machine in this video addresses exactly that step. It combines two functions in one station: wrapping the coil under film while it rotates, and feeding a logo/label element onto the wrapped coil. The video shows both actions in sequence, which makes it a useful reference for anyone evaluating whether this type of equipment fits their line.
Ce arată videoclipul
The footage moves through three distinct segments:
| Timp | Ceea ce vezi |
|---|---|
| Deschidere (0:00–0:08) | Close-up of the machine frame, red and blue air lines, and conveyor; the camera pulls back to reveal the full station with a control panel and an operator beside it, processing a cylindrical coil |
| Mid-section (0:08–0:28) | The camera pans across the production area — racks of finished coils in blue, green, and red, some with yellow labels, and a forklift moving in the background |
| Secvența principală | A green cable coil sits on a yellow rotating turntable; the coil spins steadily while held in place; a robotic arm with a yellow end effector moves in and places/presses a yellow element (label or tape) onto the coil’s side; the wrapped coil is then removed from the turntable area |
The wrapping portion is inferred from the rotating turntable and the film-handling structure around it — the coil is held stable while the turntable spins, which is the standard motion for spiral wrapping a coil’s circumference.
Procesul, pas cu pas
- Se încarcă. The green cable coil is positioned on the rotating turntable, seated against a black locating/clamping fixture. The video does not show how the coil arrives — loading appears to be either manual or upstream-fed (check with the manufacturer for the intended loading method).
- Clamping and rotation. The turntable begins to spin. The coil stays fixed relative to the turntable, so the wrap builds evenly around the coil’s outer face.
- Ambalaj. Film is applied as the coil rotates. The exact film type, overlap, and tension settings are not visible or narrated — verify with the manufacturer.
- Logo/label feeding. Around the middle of the cycle, the mechanical arm swings in carrying a yellow component — a logo plate, label, or tape piece — and positions it against the side of the rotating coil.
- Eliberare. The arm completes the placement, the coil is removed from the turntable area, and the turntable continues idle rotation awaiting the next coil.
Note de observație directă
Următoarele puncte sunt menținute aproape de ceea ce este vizibil în realitate în filmare:
- Machine frame in silver-grey metal, with some sections in blue or light-grey coating.
- Key components observed: a yellow circular rotating turntable, a mechanical arm with blue air lines and a yellow end effector, a control panel with screen and buttons (red, green, black), indicator lights (red and green), black guarding panels, and conveyor structure.
- The workpiece is a bright green cable coil, flat ring-shaped, its diameter roughly half the turntable’s diameter.
- The control panel screen shows a blue interface; its text is not readable in the footage.
- Finished coils stacked in the background are green, red, and blue; some carry yellow labels; text on labels is not readable.
- A worker is seen operating near the machine and walking in the background.
- No readable signage, watermarks, or model markings appear anywhere in the video.
Ceea ce nu arată videoclipul
Buyers should be aware the footage leaves out most of the specification-level detail:
- Rated throughput (coils per hour) and cycle time
- Machine dimensions (length, width, height) and footprint
- Applicable coil size range (min/max diameter, width, weight)
- Motor power, voltage, and air pressure requirements
- Control system brand, programmability, or recipe storage
- Model name or machine configuration options
- Certificări de siguranță (CE, UL sau altele)
- Maintenance requirements and spare parts plan
- The exact method of film wrapping and how the logo feeding is actuated (pneumatic vs. servo)
None of these are visible or narrated in the video. Treat every specification question as one to verificați cu producătorul înainte de a compara citatele.
Unde se potrivește acest tip de mașină
Based on what the footage shows, this machine class suits:
- Cable and wire manufacturers who coil product in-house and need a consistent final wrap before shipping
- Plants where branding matters — the integrated logo/label feeding step means the coil leaves the machine both protected and identified
- Lines moving away from manual wrapping, where wrap quality currently depends on operator technique
- Facilities with coil variety, since the fixture-based holding suggests size changes are possible — though the video only demonstrates one green coil size, so confirm the range with the manufacturer
It is likely less relevant if you handle very large steel coils or drum-packed product; for those, see the related machines listed below.
Buyer checklist: what to confirm before ordering
Use this list when you contact a supplier about a machine like this:
- Coil diameter, width, and weight range the machine accepts
- Whether loading and unloading are manual, conveyor-fed, or robotic
- Wrap material (stretch film type/width) and film change procedure
- How the logo/label feeding works — what label formats and positions are supported
- Changeover time between coil sizes
- Safety package: e-stop, guarding, light curtains — none were visible in the footage
- Cycle time at your coil size
- Installation, training, and spare parts support
Întrebări frecvente
Does the machine wrap and label in one pass? The video shows the coil wrapped while rotating and then receiving a yellow label/logo element from the arm before leaving the turntable, so both operations occur at one station in sequence. Whether they overlap in time is not shown — check with the manufacturer.
Ce dimensiuni de bobine poate suporta? Only one green coil size is demonstrated. The usable size range is not stated in the video — verify with the manufacturer.
Este complet automat? The video shows automated wrapping and label placement, with a worker nearby who may handle loading. The true level of automation is not clear from the footage — confirm with the manufacturer.
Sunt incluse dispozitive de siguranță? No e-stop, guarding, light curtains, or warning labels were visible in the frames shown. This does not mean the machine lacks them; ask the manufacturer for the full safety configuration.
Care sunt cerințele de putere și aer? Not shown. The presence of red and blue air lines confirms pneumatic components, but pressure and flow figures must be confirmed with the manufacturer.
Sursă și metodă
This article is based on the video embedded above. The footage contains background music only — there is no narration or speech, so no transcript was used. All observations come from a vision model analysis of frames sampled from the video; details such as on-screen text that is unreadable in the frames are noted as such. Specifications not visible in the video have deliberately not been invented.
Citire conexă
- Cable packing machines overview
- Mașină automată de bobinat și împachetat cabluri
- Mașină de împachetat bobine de sârmă
- Mașină de ambalat bobine de oțel
- Mașini de ambalat extensibil
Urmatorul pas
If you coil cable or wire and want to see how wrapping and logo feeding can be handled in one station, contactați echipa noastră. Send us your coil dimensions, weight, and daily volume, and we will confirm the right configuration and the figures the video does not show.
Publicat: 03-09-2026
