Inclinador hidráulico de bobina de 90º com mesa de trabalho ajustável

Sumário executivo Este vídeo mostra um hydraulic 90° coil tilter performing a full up-and-down tilting cycle with no load on the table. The yellow tilting table rotates smoothly from vertical to horizontal under hydraulic power, and then returns toward vertical. The footage demonstrates motion quality and machine structure only — capacity, controls, and safety features are not visible and should be confirmed with the manufacturer.

Why this machine matters in a coil handling line

A coil that arrives upright (eye vertical) often needs to be laid down (eye horizontal) before it can be hoisted, stacked, or fed into a wrapping or packing station. Doing that turn by hand, or by crane with slings and guesswork, is slow and genuinely risky — a slipping band or a swinging coil is one of the more dangerous moments in a warehouse.

A 90° coil tilter removes that moment. The coil rests on the tilting table, the hydraulics rotate the table through a quarter turn, and the coil changes orientation with the machine instead of with human hands. This video shows the machine doing exactly that movement, empty, so you can judge the motion itself: how the table travels, how the hydraulic cylinders drive it, and how it holds position at each end of the stroke.

How the machine is built (as seen in the video)

The video gives a clear look at the machine’s main structural elements. Here is what is visible and what each part does:

The table itself is a box-type welded structure with embedded reinforcing plates — that matters because a tilter carries a very heavy, concentrated load on a small contact area, and the frame stiffness is what keeps the motion stable. Small round holes in the table surface may be lifting points or sensor mounts; confirm their purpose with the manufacturer.

A máquina em ação, passo a passo

The tilting cycle in the video runs roughly like this:

1. 0–6 s — Upright position. The tilting table stands vertical, backstop raised. No operator appears; the machine starts in its rest/loading position.
2. 8–14 s — Tilt begins. The table leans back smoothly, passing roughly 45° and then 60°. The hydraulic cylinders extend in a controlled way; the motion is continuous, without jerks or pauses.
3. 16–24 s — Reaching horizontal. The rotation continues to about 75–85° and settles into a near-horizontal position, where the table pauses. The flat working surface faces upward, ready for a coil to be removed or loaded.
4. 30–48 s — Return stroke. In the second half of the video, the table travels back up from an inclined position toward vertical, again with a steady, continuous hydraulic motion, and stops near the fully upright position.

The full motion is steady in both directions. There is no visible vibration, no sudden drop at any angle, and no manual assistance — the hydraulics control the entire stroke. That controlled descent is one of the practical selling points of a hydraulic tilter over a gravity or gear-driven design: the load lowers at a governed speed instead of being lowered by hand.

Notas de observação direta

• The machine has a yellow 90° tilting table with a vertical backstop, mounted on a blue steel base with visible hydraulic cylinders and guide rails.
• The table rotates from vertical through approximately 45°, 60°, and 75° down to a near-horizontal position, then later returns upward toward vertical.
• The hydraulic power unit sits to the right of the base and includes a pump/tank, valve group, and multiple high-pressure hoses; a vertical cylinder with a yellow cap is also visible.
• No coil or workpiece appears at any point; the machine is shown empty (no-load) throughout.
• No independent control panel, emergency stop button, safety fence, or light curtain is clearly visible in any frame.
• A silver nameplate on the table side and labels on a red electrical box are present but unreadable at video resolution.
• On-screen text includes a watermark and a Chinese banner (“Quality, Efficiency, Tidiness”) in the workshop background.
• The tilting motion lasts approximately 24 seconds per direction based on the frame timeline.

O que o vídeo não mostra

This is an empty-machine demonstration, so several things a buyer needs are simply not observable:

• Capacidade nominal — maximum tilting weight, torque limits, and coil diameter range are not stated anywhere in the footage.
• The adjustable working table in use — the title names an adjustable working table, but no adjustment mechanism or adjustment action is shown. What adjusts, and how, must be Consultei o fabricante..
• Controles — no panel, buttons, or indicators are clearly visible; control type (push-button, pendant, PLC) is unknown.
• Equipamento de segurança — no e-stop, fence, or light curtain appears; whether safety devices are fitted off-camera needs confirmation.
• Loaded behavior — stability, table deflection, and cycle time under a real coil cannot be judged from an empty run.
• Hydraulic specifications — system pressure, flow, motor power, and tank size are not shown.
• Certificações — no CE mark, certificate, or model number is visible.

Where a 90° tilter fits in a typical workflow

Based on what the machine does, the normal role in a line looks like this: a coil arrives upright → it is placed on the tilter → the table rotates the coil 90° → the coil is lifted, rolled off, or fed to the next station, such as wrapping or packing. Common settings include steel service centers, wire and cable plants, aluminum and copper coil processors, and general metal logistics hubs.

If the tilter sits upstream of packaging equipment, the orientation change is usually the first step before a máquina de embrulhar bobinas ou um completo linha de embalagem automática de bobinas takes over. On its own, the tilter is a short, simple machine to integrate; in a line, its loading height and discharge direction need to match the upstream and downstream equipment — a layout question worth confirming early.

Perguntas a fazer antes de comprar

Use this checklist when you contact a supplier about this machine:

1. O que é a sessão peso e diâmetro máximos da bobina the tilter accepts?
2. Como é que adjustable working table adjust, and to what positions or sizes?
3. O quê controles are provided — push button, pendant, foot switch, or PLC?
4. São dispositivos de segurança included (e-stop, limit switches, warning alarm), and do they meet local regulations in your region?
5. Quais são os cycle time and hydraulic specifications under full load?
6. Is manual emergency lowering available in case of power loss?

Each of these addresses something the video could not demonstrate, so treat them as open items rather than assumptions.

Maintenance points to expect

The video cannot cover servicing, but a hydraulic tilter’s maintenance profile is predictable:

• óleo hidráulico — check level and condition; replace per the manufacturer’s interval (confirm the schedule).
• Mangueiras e vedações — inspect regularly for weeping or abrasion at the cylinder connections; the multiple hoses visible on the power unit are the usual wear points.
• Pivô pontos — grease the table hinge bearings; a dry hinge shows up first as jerky motion.
• Limit stops — verify end-of-travel stops remain secure so the table never overshoots vertical or horizontal.
• Paint and welds — the video shows minor scuffs on a used-looking unit; in service, chips on load-bearing welds should be touched up to prevent corrosion.

Perguntas frequentes

Does the video show a coil being tilted? No. The machine runs empty the entire time. The motion and structure are demonstrated, but no loading or unloading is shown.

How long does one tilt take? The downward stroke takes roughly 24 seconds based on the frame timeline; the return stroke is similar. Cycle time under full load is not shown — check with the manufacturer.

Is the working table adjustable, as the title says? The title says so, but no adjustment action is visible in the footage. Confirm the adjustment range and method directly with the manufacturer.

Possui proteção de segurança? No fence, light curtain, or emergency stop is visible in the video. Whether such devices are fitted needs confirmation.

What coils is it suitable for? The machine type is typically used for steel, aluminum, and copper coils in warehousing and transit, but the capacity limits for this specific unit are not stated in the video.

Fonte e método

The source for this article is the product video embedded above. The footage was analyzed by a vision model on sampled frames (2-second intervals); the video contains background music only, with no narration, so no speech was transcribed. All factual statements come from what is visible in the frames; capacity figures, certifications, and control details are absent from the footage and are flagged for manufacturer confirmation.

Leitura relacionada

• Linha de embalagem automática de bobinas
• Enrolador de bobina mestre
• Máquina de embalagem de bobinas
• Máquina de embrulhar bobinas de aço
• Máquina de embrulhar bobina de fio

Próxima etapa

If this 90° hydraulic coil tilter looks like a fit for your line, tell us your coil weight, diameter, and orientation change, and we will confirm the right capacity and table configuration. Visit our página de contato to request specifications and a quotation.

Publicado em: 03/09/2026