Sumário executivo
An aluminum packing machine wraps a flat annular aluminum coil on a roller conveyor as the first stage of the coil’s packaging. A film-carrying arm lowers over the coil, the coil rotates slowly, and stretch film covers the outer edge, after which the wrapped coil moves on to the downstream line. The wrap keeps dust and handling marks off the coil surface until delivery. Coil diameter, film grade and wrap profile are confirmed per project.
Conteúdo
- Why pack aluminum coils automatically
- O que a máquina faz
- Coil feed conveyor and wrap arm
- Wrap cycle and transfer
- O que as imagens mostram
- Configuração típica
- Lista de verificação de seleção
- Operação e segurança
- Perguntas frequentes sobre engenharia
- Próxima etapa
- Leitura relacionada
- Fontes e normas
Why pack aluminum coils automatically
A flat aluminum coil is a thin metal roll that picks up dust, scuffs and moisture during handling. Automatic film wrapping covers the coil quickly and evenly so the surface stays clean until it reaches the next process or the customer.
Repeating the same wrap on every coil also keeps the package consistent from shift to shift. Coil size and wrap profile are confirmed per project.
O que a máquina faz
The machine is an automatic coil packing unit laid out in a line. A flat aluminum coil is placed on the wrapping conveyor, and a lifting arm with a film reel lowers over the coil and wraps its outer edge as the coil rotates.
When the cycle ends, the wrapped coil is carried forward on the conveyor. Coil outer diameter, width and film grade are confirmed per project.
Coil feed conveyor and wrap arm
A roller conveyor moves the coil into the wrap station and holds it horizontal during the run. A movable lifting arm above the station carries the film reel and lowers onto the coil, while the conveyor lets the coil rotate slowly so the film lays evenly around the edge.
A safety fence surrounds the moving area, and a control cabinet at the side holds the panel. Coil width and film width are confirmed per project.
Wrap cycle and transfer
A cycle starts when the coil stops in the wrap station. The arm lowers, film unwinds from the reel, and the coil turns while the film covers the outer face; the arm lifts when the set wrap is done.
The wrapped coil then advances on the conveyor to the next station or to storage. Wrap count and transfer speed are confirmed per project.
O que as imagens mostram
Our footage shows a flat annular metal coil arriving on a roller conveyor at the wrap station of an automatic coil packing machine. A film-carrying arm lowers from above as the coil rotates, and stretch film is laid over the coil edge, after which the wrapped coil continues downstream.
A mesh safety fence encloses the moving parts, and a control cabinet sits at the side of the line. It is a general demonstration, so your coil size, film grade and wrap profile are confirmed with us per project.
Configuração típica
Os valores apresentados abaixo listam os limites funcionais do projeto, em vez de valores numéricos, e são confirmados por projeto.
| Parâmetro | Faixa típica, confirmada por projeto. |
|---|---|
| Ver | flat annular aluminum coil on the wrapping conveyor |
| Geometria da bobina | outer diameter and width in mm, center eye size |
| Filme | stretch film from the reel on the lifting arm |
| rotação | coil rotates slowly on the conveyor during the wrap |
| Embrulhe | passes around the coil outer edge, set per project |
| Transferência | downstream conveyor for the wrapped coil |
| Guardando | mesh safety fence around the wrap station |
| alimentação eléctrica | 380 V trifásico 50 Hz ou 220 V monofásico para máquinas leves, selecionado conforme o projeto. |
Lista de verificação de seleção
| Questão | Confirme por projeto |
|---|---|
| Faixa de bobinas | outer diameter, width and eye size of the coils |
| Filme | stretch film grade, width and gauge |
| Embrulhe | passes around the coil and overlap demand |
| Manuseamento | coil feed method and downstream transfer height |
| Guardando | fence layout and access points |
| alimentação eléctrica | tensão, fase e frequência no local |
Operação e segurança
Feed the coil onto the wrapping conveyor, start the cycle, and let the arm wrap the coil before it moves downstream. Keep clear of the arm travel, the rotating coil and the film reel while the machine runs.
Routine checks cover the arm drive, the film feed and the safety fence, per the machine manual. Confirm the coil is seated on the conveyor and centered before each wrap.
Perguntas frequentes sobre engenharia
Q: How is the film applied to the coil? A: A lifting arm carries the film reel over the coil, and the coil rotates so the film covers the outer edge in set passes.
Q: Does the coil stay horizontal during wrapping? A: Yes, the coil rests flat on the conveyor and rotates in place, so the wrap follows the coil edge evenly.
Q: Can the machine handle different coil sizes? A: Yes, the station wraps coils of different outer diameters and widths; your coil range is confirmed with your details.
Q: What happens after the wrap is complete? A: The arm lifts, and the wrapped coil advances on the conveyor to the next station or to storage.
P: Qual a alimentação elétrica necessária? R: A máquina funciona com 380 V trifásico 50 Hz como padrão, e máquinas mais leves podem ser adaptadas para 220 V monofásico, conforme a necessidade de cada projeto.
Próxima etapa
- Email us at info@fhopepack.com with your coil outer diameter and width.
- We send an aluminum coil packing proposal within 48 hours.
- We confirm the film grade and wrap profile for your coils.
Leitura relacionada
- Máquina de embalagem de alumínio: tecnologia e melhores práticas
- Linha de embalagem de bobinas cortadas para centros de serviço: cintagem, envolvimento com ilhós e empilhamento.
- Máquina de embalagem de bobinas de aço e cobre com filme transparente.
- Linhas de produtos de máquinas de embalagem FHOPE
Fontes e normas
- ISO 12100:2010 Segurança de máquinas, princípios gerais para projeto e avaliação de riscos
- EN 415-10:2014 Segurança de máquinas de embalagem, requisitos gerais
- EN ISO 13849-1:2023 Segurança de máquinas, partes de sistemas de controle relacionadas à segurança
FHOPE aluminum coil packing machine demonstration video. Reviewed as a general demonstration; coil size, film grade and wrap profile confirmed per project.
Última revisão: 12/10/2026
