കനത്ത ലോഡിന് മൊയ്ബിൾ പാലറ്റ് മാറ്റുന്ന യന്ത്രം
The mobile pallet changer is a versatile handling equipment that is used to change pallets in a variety of applications. It is designed to be powered by a battery, offering mobility and flexibility in a range of environments and situations.
മൊയ്ബിൾ പാലറ്റ് ചേഞ്ചർ-പ്ലസ് എ
വിഷ്വൽ വിശദാംശങ്ങൾ
വലുതാക്കുന്നു ക്ലിക്കുചെയ്യുക
വലുതാക്കുന്നു ക്ലിക്കുചെയ്യുക
വലുതാക്കുന്നു ക്ലിക്കുചെയ്യുക
വലുതാക്കുന്നു ക്ലിക്കുചെയ്യുക
ഇത് എങ്ങനെ പ്രവർത്തിക്കുന്നുവെന്ന് കാണുക
ഞങ്ങളുടെ ഓട്ടോമേറ്റഡ് പാക്കേജിംഗ് സൊല്യൂഷനുകൾ നിങ്ങളുടെ പ്രൊഡക്ഷൻ ലൈൻ കാര്യക്ഷമത എങ്ങനെ മെച്ചപ്പെടുത്തുന്നുവെന്ന് കണ്ടെത്തുക. പരമാവധി സംരക്ഷണത്തിനായി രൂപകൽപ്പന ചെയ്തിരിക്കുന്ന സുഗമമായ പ്രവർത്തനം ഈ വീഡിയോ പ്രകടമാക്കുന്നു.
ഉൽപ്പന്ന അവലോകനം
The Mobile Pallet Changer-Plus A (FPZ-M01) is a battery-driven electric pallet truck integrating lifting, clamping, and automatic 180° rotation in one mobile unit. Operators can swap pallets, split stacked loads, or redistribute goods to multiple pallets anywhere on the floor without a fixed installation footprint.
Its representative configuration provides a Max Loading of 1500 kg, a lifting height of 1.6 m, and approximately 6 hours of battery operation per charge. It is designed for loads that must be inverted or transferred at different points rather than at a single station.
കീ വ്യതിയാനങ്ങൾ
Factory nominal ratings for the standard FPZ-M01 configuration; actual payload and dimensions are validated per project. Battery working time is based on a standard test cycle.
| ഇനം | വിവരണം |
|---|---|
| മെഷീൻ തരം | Battery-driven electric pallet truck with integrated 180° rotator |
| പരമാവധി ലോഡുചെയ്യുന്നു | 1500 കിലോ |
| ഉയരം ഉയർത്തുന്നു | 1.6 മീറ്റർ |
| നാൽക്കവല ഭുജത്തിന്റെ വലിപ്പം | 1100 × 165 × 50 മില്ലി |
| ഫോർക്ക് ആം ഓപ്പണിംഗ് ശ്രേണി | 1400 മില്ലീമീറ്റർ |
| Fork arm height | 1600 മില്ലീമീറ്റർ |
| മെഷീൻ വീതി | 850 മില്ലീമീറ്റർ |
| ഹാൻഡിൽ ഉയരം | 1490 മില്ലീമീറ്റർ |
| വ്യാസാർദ്ധം തിരിക്കുക | 1250 മില്ലീമീറ്റർ |
| Loading speed / Unloading speed | മണിക്കൂറിൽ 4 കി.മീ / മണിക്കൂറിൽ 5 കി.മീ |
| ഗ്രേഡിയന്റ് ലോഡ് ചെയ്യുന്നു | 10% |
| ലിഫ്റ്റിംഗ് മോട്ടോർ | 2.2 കിലോവാട്ട് |
| ഡ്രൈവിംഗ് മോട്ടോർ | 1.2 കിലോവാട്ട് |
| ബാറ്ററി പ്രവർത്തന സമയം | Approx. 6 hours per charge |
| മെഷീൻ ഭാരം | 1200 കിലോ |
The 1500 kg Max Loading is the representative factory-rated capacity; actual payload is validated per project.
ഇത് എങ്ങനെ പ്രവർത്തിക്കുന്നു
The FPZ-M01 follows a five-step operating cycle:
-
സ്ഥാനം
Drive to the load using the battery-powered drive system, with 4 km/h loading speed, 5 km/h unloading speed, and a 10% negotiable gradient.
-
പട്ട
Insert the 1100 × 165 × 50 mm lower fork arms under the pallet and close the top clamping plate with a single-button command, holding the load vertically between the forks and upper clamp.
-
ലിഫ്റ്റ്
The 2.2 kW lifting motor raises the clamped load to a height of up to 1.6 m.
-
തിരിക്കുക
Automatic 180° rotation inverts the load so the damaged or unsuitable pallet sits on top and can be exchanged.
-
Release, re-palletize and relocate
Remove the old pallet, place the new one on top, rotate back upright, travel to the destination, and lower the load into place.
Clamping speed and rotation speed are both adjustable to match the load type and operator preference.
അനുബന്ധ യന്ത്രങ്ങൾ
വിശ്വസിച്ചത് സ്റ്റീൽ മില്ലുകളും വ്യവസായ പ്രമുഖരും
ആഗോള നിർമ്മാതാക്കൾ FHOPE ഹെവി ഡ്യൂട്ടി പാക്കേജിംഗ് ഉപകരണങ്ങളെ ആശ്രയിക്കുന്നു.
നിങ്ങളുടെ പാക്കേജിംഗ് ലൈൻ ഒപ്റ്റിമൈസ് ചെയ്യാൻ തയ്യാറാണോ?
ROI വിശകലനം ഉപയോഗിച്ച് ഒരു ഇഷ്ടാനുസൃത ഉദ്ധരണി നേടുക. ഞങ്ങളുടെ എഞ്ചിനീയർമാർ 24 മണിക്കൂറിനുള്ളിൽ പ്രതികരിക്കും.
- സൌജന്യ ലേഔട്ട് ഡിസൈൻ
- ആഗോള ഇൻസ്റ്റാളേഷൻ പിന്തുണ
- 2 വർഷത്തെ വാറൻ്റി ഉൾപ്പെടുത്തിയിട്ടുണ്ട്
നിങ്ങളുടെ വിവരങ്ങൾ സുരക്ഷിതമാണ്, ഒരിക്കലും പങ്കിടില്ല.