> **Santrauka**
> This test run in our workshop shows our rotating coil upender with no load. An orange L-shaped table with a V cradle tilts through 90°, and the whole table turns on its base, so a coil can be loaded from one side and leave from another. Our rotating models FPCT-05, FPCT-10 and FPCT-40 cover loads from 2,000 kg to 40 t with a turn time of 60–90 s. Below we explain the two motions, the data and a worked example for coils per hour.
Turinys
- Ką rodo klipas
- Kodėl reikia pridėti rotacinį pagrindą
- Sukamosios ritės apvertimo duomenys
- Ritės per valandą
- Atrankos kontrolinis sąrašas
- Saugumas
- Inžinerijos DUK
- Kitas žingsnis
- Susijęs skaitymas
- Šaltiniai
Ką rodo klipas
Sąvaržėlė yra bandomoji mūsų dirbtuvėse, kai mašina yra neapkrauta.
| Žingsnis | Ką matai |
|---|---|
| Start | An orange L-shaped table with a V-shaped cradle sits on a dark grey base frame |
| Tilt | The table tilts through 90°, so the V cradle and the flat table swap between horizontal and vertical |
| Rotate | The table turns on the base, so the open side of the cradle faces a new direction |
| Repeat | The tilt and turn are run again to show both motions together |
Šie du judesiai yra atskiri: pakreipimas keičia ritės akutės padėtį iš horizontalios į vertikalią, o posūkis pakeičia pusę, iš kurios ritė pakraunama arba išimama.
Kodėl reikia pridėti rotacinį pagrindą
- **Loading from one side, unloading from another.** A crane or forklift can load the coil from the aisle, and the base turns so the coil leaves towards the next machine.
- **Tight bays.** The machine turns the coil instead of the forklift turning round it, which helps where there is little space.
- **Eye-to-sky or eye-to-side.** The 90° tilt sets the coil for a decoiler or for vertical storage, and the turn sets its direction.
- **Stop at any angle.** Position locking lets the table hold at any angle during the tilt.
Sukamosios ritės apvertimo duomenys
Mūsų paskelbti duomenys apie besisukantį ritės apvertėją:
| Elementas | Paskelbta reikšmė |
|---|---|
| Models | FPCT-05, FPCT-10, FPCT-40 |
| Max load | 2,000 kg to 40 t |
| Upending angle | 90° |
| Base rotation | Base frame with rotating table for 180°; base function listed as 360° turning for the flipping table |
| Table | Flat table L1,500 × W1,500 mm; V table L1,500 × W1,500 mm (customised) |
| Main turn time | 60–90 s per piece |
| Drive | Worm speed reducer, inverter soft start and stop |
| Safety | Electric and mechanical displacement limits; position locking at any angle |
| Power | About 4.0 / 5.0 / 15 kW, 380 V 50 Hz 3-phase |
Standartiniam tik pakreipiamam apvertimo įrenginiui mūsų FPCT asortimentas apima 2–50 t, ciklo laiką – 50–100 s ir suteikia 2 metų garantiją.
Ritės per valandą
**Worked example (illustrative).** At a turn time of 90 s, one machine completes 3,600 ÷ 90 = 40 turns per hour. If each coil needs one tilt and one return, that is about 20 coils per hour, before crane or forklift time is added.
Atrankos kontrolinis sąrašas
- [ ] Coil weight, OD, ID and width.
- [ ] Tilt direction and whether you need the rotary base.
- [ ] Loading and unloading directions in your bay.
- [ ] Flat table, V table or both.
- [ ] Ritės per valandą.
- [ ] Floor condition, since the base has levelling adjustment for uneven floors.
Saugumas
The table tilts a heavy coil and the base turns it, so the swept area must be kept clear. We fit electric and mechanical travel limits, position locking and a separate control panel, and guard the zone to the risk assessment. For CE markets we apply ISO 12100:2010 and [EN 415-10:2014](https://www.nen.nl/en/nen-en-415-10-2014-en-191845).
Inžinerijos DUK
Q: What does the rotary base add to a coil upender?
A: It turns the table so the coil can be loaded from one side and taken off from another.
Q: How far does the table tilt?
A: 90°, between eye-horizontal and eye-vertical.
Q: What loads can it take?
A: Our rotating models cover 2,000 kg to 40 t.
Q: How long does one turn take?
A: About 60–90 s per piece.
Q: Can it stop part way?
A: Yes. Position locking lets the table stop at any angle.
Q: What table sizes are standard?
A: Flat and V tables of L1,500 × W1,500 mm, customised to the coil.
Q: How many coils per hour?
A: About 20 coils per hour at 90 s per motion with one tilt and one return.
K: Kokie standartai taikomi?
A: CE rinkoms, ISO 12100 ir EN 415-10.
Kitas žingsnis
Ritės su rotaciniu pagrindu dydžio nustatymą atliekame trimis etapais:
1. **Submit your layout drawing** with coil weight and sizes, loading and unloading directions and coils per hour, to **info@fhopepack.com**.
2. **Gaukite pasiūlymą per 48 valandas** su mašinos duomenimis ir išdėstymu.
3. **Book a site survey** so we confirm the floor, crane and forklift access.
Susijęs skaitymas
- [Hydraulic Coil Tilter for 90° Turning](https://www.fhopepack.com/videos/hydraulic-coil-tilter-the-smart-fix-for-costly-coil-handling/)
- [Coil Upender with Transfer Trolley](https://www.fhopepack.com/videos/steel-coil-upender-for-coil-unloading-with-transfer-trolley/)
- [Rail-Mounted Coil Transfer Car with 360° Cradle](https://www.fhopepack.com/videos/how-to-load-coils-into-decoiler-with-360-rotation-fhopepack-coil-car/)
- [Rotating coil upender data](https://www.fhopepack.com/Mechanical/Rotating-Coil-Upender.html)
Šaltiniai
- Clip (our test run): [the video on YouTube](https://www.youtube.com/watch?v=EaJNd9zmMd8)
- Models, load, angle, base, tables, turn time, drive, safety and power: [Rotating coil upender data](https://www.fhopepack.com/Mechanical/Rotating-Coil-Upender.html)
- FPCT range and warranty: [Coil upender range](https://www.fhopepack.com/Coil-Upender/)
- Coils per hour: our worked arithmetic
- Standartų taikymo sritis: ISO 12100:2010; [EN 415-10:2014](https://www.nen.nl/en/nen-en-415-10-2014-en-191845)
- Pasiūlymo pateikimo laikas: patvirtintas įmonės kvietimas teikti paraiškas (pasiūlymas pateiktas per 48 valandas)
Paskutinį kartą peržiūrėta: 2026-10-10
