latae filum coil artans et parat machina

0 participat
The video of the wire coil compacting and strapping line.

Operation of the Compacting machinaine

The operator should place a basket along with its wire coil on the compressing machine. The basket/Rosette along with the coil should be displaced to the position of the strapping table supplied by buyer.

To be able to create the desired coil height by comapcting, you’ll need to first load the wire coil onto the compacting table. After that, use a compactor to push the coil against the center of the table while it descends. This will help you compress the coil and create the desired height per setting. Strapping procession is necessary to complete this process for bind the wire coil. Once you apply straps, the machine will automatically return to its starting position. Once you have loaded the wire coil onto the plate, you’ll need to press it against the center of the table using a compactor. This will decrease its height as per your specifications and make it easier for strapping. The machine is designed with a strapping gap so that strapping material can easily get through the inside of the coil ID for strapping. Once you have strapped your coil, the machine will automatically return to its initial position.

More wire coil packing line: FHOPE providing solution per your wire coil packaging with automation system.

0 participat

Leave a comment