개요 This video shows a complete orbital wrapping cycle for a long bundle of metal profiles: it enters on a roller conveyor, a rotating arm spirals stretch film around it inside a guarded enclosure, and a fully wrapped bundle exits — all within roughly 16 seconds of footage. The machine is linear, enclosed by a safety cage, and controlled from a panel with start, stop, and emergency-stop functions.
이 기계가 존재하는 이유
Long, straight products — aluminum extrusions, steel tubes, pipes, plastic profiles — are awkward to protect by hand. Workers walking around a bundle with a film roll produce loose, uneven wraps, and the ends of the bundle often stay exposed. An 궤도형 스트레치 랩 포장기 solves this by keeping the product stationary while a rotating ring or arm travels around it, applying stretch film in a tight, continuous spiral.
The video on this page shows exactly that process, from bare bundle to fully wrapped bundle, with no narration — only the machine at work.
영상은 기계가 작동하는 모습을 보여줍니다.
The footage follows one complete cycle, stage by stage:
| Time | 무슨 일이 |
|---|---|
| 0–4년대 | A long rectangular bundle of silver metal profiles, partially wrapped, travels on a 녹색 롤러 컨베이어 toward the white enclosed machine. |
| 4–8년대 | The bundle moves fully inside the machine’s enclosure. The rotating arm and film roll are visible through the wire-mesh safety cage. Film is drawn from the roll and begins to wrap. |
| 8–12년대 | A close-up shows the rotating arm circling the 고정 묶음, stretching clear film and applying it in a spiral pattern. |
| 12–16년대 | The camera pulls back: the bundle exits fully encased in a tight layer of film and continues down the conveyor. |
요점은 the product does not rotate. The film ring rotates around it. This is what makes the machine practical for long profiles that would be difficult or unsafe to spin on their own axis.
기계 구조 한눈에 보기
From what is visible in the video:
- Main frame and enclosure: white painted steel; linear layout — product feeds in from the left, wraps in the center, exits right.
- Wrap station: enclosed by a silver metal wire-mesh safety cage with a latched door.
- 회전하는 팔: holds the film dispenser; yellow and white internal components, including film guide rollers.
- 필름 시스템: a large roll of clear stretch film plus a film tensioning and cutting mechanism.
- 컨베이어 : green roller conveyor on both sides of the wrap zone.
- 제어판 : gray box on the right side near the exit, with a 디지털 디스플레이, a red emergency-stop button, a green start button, a yellow button, and a black rotary knob — likely for setting adjustment, though its exact function should be confirmed with the manufacturer.
- 라벨링 : a small white “F70V” label appears on the machine frame in the opening shot; a red and white warning label is visible near the control panel. Confirm the model designation and its meaning with the manufacturer before ordering.
직접 관찰 기록
- The video opens on a wide factory-floor shot; a long rectangular bundle of metal profiles, partially wrapped in clear plastic film, moves on a green roller conveyor toward a large white enclosed machine.
- The camera moves closer to the control panel and wrap zone; the bundle sits fully inside the enclosure, and the rotating arm and film roll are visible through the safety cage as film begins to wrap.
- A zoom shot shows the rotating arm, which holds the film dispenser, moving in a circular path around the stationary bundle; clear film is stretched and applied in a spiral pattern; a red air hose is prominent in the foreground.
- The camera pulls back to a wider view; the fully wrapped bundle exits the machine and continues along the conveyor toward the end of the line.
- Visible controls: digital display screen, red emergency-stop button, green start button, yellow button, black rotary knob.
- A watermark reading “FHOPE GROUP PACKING SOLUTION FOR YOU” and “www.fhopepack.com” is visible throughout.
영상에 나오지 않는 것
The footage demonstrates the wrapping motion, but several facts a buyer needs are not observable:
- 정격 용량 — maximum bundle weight and cross-section.
- 기계 치수 — confirm footprint and height against your floor plan.
- 생산 기간 — the video is ~16 seconds of edited footage; real cycle times depend on bundle length and wrap overlap settings.
- 전원 요구 사항 — voltage, phase, and amperage.
- 제품사양 — CE or other safety/quality marks are not visible.
- 필름 사양 — film gauge, width, and type are not stated.
- 모델 세부 정보 — the “F70V” marking appears on the frame but is not explained.
위의 모든 사항을 다음과 같이 처리하십시오. 제조업체에 확인하십시오. 항목.
이 기계가 적합한 위치
Based on the product shown, this type of machine suits:
- Aluminum and steel extrusion bundles
- Pipes, tubes, and rods bundled in uniform lengths
- Any long, linear product needing dust, scratch, and moisture protection before transport or storage
그것은 지원 the right fit for irregularly shaped, very short, or very heavy single items — the orbital design works best on long bundles with a consistent cross-section. For those cases, a turntable wrapper or a rotary-ring machine may be a better match.
안전 기능 관찰됨
- Full wire-mesh cage around the moving wrap mechanism
- Latched cage door acting as an interlock, designed to stop operation when open
- Prominent red emergency-stop button on the control panel
- Warning label on the machine frame
These are visible features only. Full interlock behavior and compliance details should be confirmed in writing before purchase.
구매자 체크리스트
Before requesting a quotation, prepare answers to these questions:
- 무엇인가 maximum length, weight, and cross-section of your bundles?
- 뭐 처리량 (bundles per hour) do you need?
- 귀하의 이용 가능 시간은 무엇입니까? 전원 공급 장치 at the installation site?
- 당신이 필요로 할 automatic film cut and clamp, or will an operator trim the tail?
- 뭐 film width and gauge do you currently use — and can the machine accept it?
- 얼마 바닥 공간 do you have for the machine plus infeed and outfeed conveyor?
자주하는 질문
포장하는 동안 제품이 회전하나요? No. In the video, the bundle stays stationary on the conveyor while the rotating arm circles it. This suits long profiles that should not be spun.
랩핑 한 사이클은 얼마나 걸리나요? The video shows a complete sequence in about 16 seconds, but it is edited footage. Actual cycle time depends on bundle length and the number of wrap passes — check with the manufacturer.
어떤 제품을 처리할 수 있나요? The video shows a bundle of metal profiles. Similar machines are used for pipes, hoses, and other long extruded products. Suitability for your specific product — check with the manufacturer.
Is the machine enclosed? Yes. A wire-mesh safety cage surrounds the wrap zone, with a latched door and an emergency-stop button on the control panel.
What is the “F70V” label on the frame? It is visible in the video but not explained. Verify the model designation with the manufacturer.
관련 독서
다음 단계
If you wrap long profiles, pipes, or tubes and want to replace manual wrapping with a consistent automated process, FHOPE에 문의하세요 with your bundle dimensions and throughput targets. Share your product samples or drawings so the right machine configuration can be confirmed before you buy.
Source and method: This article is based on the product video above. Footage was analyzed frame-by-frame using a vision model; the video contains background music only, with no narration or speech to transcribe. Specifications not visible in the video must be verified with the manufacturer.
게시일: 2026년 09월 03일
