개요
To choose packing material for steel wire packing, first see how the coil is wound and how far it must travel. For short, clean trips stretch film alone protects the coil surface, while VCI rust-protection paper suits long storage and sea transport. Straps are planned at 1 to 3 per coil, and every choice is confirmed per project.
차례
- Why material choice starts at the coil
- 기계가 하는 일
- Wire feed and winding unit
- Winding cycle and ring transfer
- 영상에 나타난 내용
- 일반적인 구성
- 선택 체크리스트
- 운영 및 안전
- 엔지니어링 FAQ
- 다음 단계
- 관련 독서
- 출처 및 표준
Why material choice starts at the coil
The packing material has to match how the steel wire leaves the machine. A tightly wound coil holds its shape and needs only a surface film, while a loose or heavy coil calls for extra strapping and stronger protection.
Film and strap over the coil keep the wires together and the surface clean from the machine to the delivery point. Packing material and strap count are confirmed per project.
기계가 하는 일
The machine is a steel wire coiling unit that turns long steel wire into wound coils. The wire is drawn from a pay-off reel through guide rollers and tension wheels, then wound onto a take-up spool to form a compact coil.
A robotic arm lifts the finished ring of wire and positions it for the next step. The finished coil is then packed with the material you choose per project.
Wire feed and winding unit
At the feed end, the wire passes through guide rollers and a pair of sizing and tension wheels that keep the wire path steady. Pneumatic elements support the movements along the line.
The winding unit takes the wire around a take-up spool, where the layers build up into a compact coil. Wire diameter and coil size range are confirmed per project.
Winding cycle and ring transfer
The cycle starts when the wire is guided into the take-up spool and winds at a steady speed until the coil is full. The wire path is held through the whole build so the layers stay even.
When the coil is finished, a robotic arm moves the formed ring into position for the next operation. Winding speed and ring timing are confirmed per project.
영상에 나타난 내용
Our footage shows a steel wire coiling machine drawing wire through guide and tension wheels, winding it onto a take-up spool, and a robotic arm lifting the formed wire ring clear of the unit. It is a general demonstration, so your wire size, coil type and packing material are confirmed with us per project.
일반적인 구성
아래 표는 수치 값이 아닌 기능적 설계 경계를 나열한 것이며, 프로젝트별로 확정된 내용입니다.
| 매개 변수 | 일반적인 범위이며, 프로젝트별로 확정됩니다. |
|---|---|
| 먹이 | steel wire from a pay-off reel through guide rollers |
| 바로 잡다 | sizing and tension wheels hold the wire path |
| Wind | take-up spool builds the wire into a compact coil |
| 반지 | robotic arm transfers the finished ring |
| Control: | panel with start-up and emergency stop per project |
| Film | stretch film or VCI rust-protection paper per project |
| 스트랩 | 1 to 3 straps per coil, selected per project |
| 전기 공급 | 380V 3상 50Hz 또는 경량 장비의 경우 220V 단상(프로젝트에 따라 선택) |
선택 체크리스트
| 문제 | 프로젝트별로 확인하세요. |
|---|---|
| 와이어 범위 | wire diameter and coil outer and inner size |
| 코일 타입 | round coil or flat ribbon and ring form |
| Film | 단거리 이동에는 스트레치 필름을, 장기 보관에는 VCI 방청지를 사용하세요. |
| 스트랩 | 1 to 3 per coil, chosen from coil width, diameter and stability |
| Control: | panel layout, speed setting and emergency stop |
| 전기 공급 | 현장에서 전압, 위상 및 주파수 측정 |
운영 및 안전
Guide the wire into the feed rollers, start the cycle, and let the machine wind and transfer the finished ring. Keep your hands clear of the take-up spool, the tension wheels and the robotic arm while the unit runs.
Routine checks cover the guide rollers, the tension wheels and the spool, per the machine manual. Confirm the wire path is clear before each start.
엔지니어링 FAQ
Q: What does this machine do? A: It winds long steel wire into compact coils and transfers the finished ring for the next step.
Q: How is the wire fed in? A: The wire is drawn from a pay-off reel through guide and tension wheels into the take-up spool.
Q: What packing material suits steel wire? A: Stretch film for short, clean trips, and VCI rust-protection paper for long storage or sea transport.
Q: How many straps does a coil need? A: Straps are planned at 1 to 3 per coil, chosen from coil width, diameter and stability.
질문: 어떤 전원이 필요합니까? 답변: 이 기계는 기본적으로 380V 3상 50Hz로 작동하며, 소형 기계의 경우 프로젝트에 따라 220V 단상으로도 구성할 수 있습니다.
다음 단계
- Email us at info@fhopepack.com with your wire size and coil type.
- We send a packing proposal within 48 hours.
- We confirm the film and strap plan for your coils.
관련 독서
출처 및 표준
- ISO 12100:2010 기계 안전, 설계 및 위험 평가에 대한 일반 원칙
- EN 415-10:2014 포장기계의 안전, 일반 요구사항
- EN ISO 13849-1:2023 기계의 안전, 제어 시스템의 안전 관련 부품
FHOPE steel wire coiling machine demonstration video. Reviewed as a general demonstration; wire size, coil type and packing material confirmed per project.
최종 검토일: 2026년 10월 12일
