---
description: Reclining And Rotating Pallet Inverter In Stationary Type Is For Heavy Load Tipping In 90 Degree Onto The Back. It Is Spececial Designed For Wide And Heavy Pallet.
image: https://www.fhopepack.com/blog/wp-content/uploads/2023/02/heavy-load-reclining-pallet-inverter-zt.webp
title: Heavy load reclining pallet inverter
---
### Get Your Free ROI Analysis
Our engineers will calculate your potential savings.
Full Name \*
Company Email \*
Country
Phone
Project Details
Request My ROI Analysis
Your information is secure and will never be shared.
Now Available Worldwide
# Reclining And Rotating Pallet Inverter For Wide And Heavy Pallet
Stationary reclining and rotating pallet inverter for wide, heavy loads. 90° tilt and 180° turntable cycle with single or dual clamping defined per project.
[Get Free Quote](#contact-form) [ Watch Demo](#video-section)
CE Certified
ISO 9001
2 Year Warranty
[](https://www.fhopepack.com/blog/wp-content/uploads/2023/02/heavy-load-reclining-pallet-inverter-zt.webp)
98%
Efficiency Rate
2 Year
Full Warranty
Heavy load reclining pallet inverter
## Visual Details
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
×
![Enlarged view]()
See It In Action
## Watch How It Works
Discover how our automated packaging solutions optimize your production line efficiency. This video demonstrates the seamless operation designed for maximum protection.
High Throughput
Up to 60 coils per hour
Consistent Quality
Every wrap meets spec
[Request A Quote](#contact-form)
Description More Data
## Product Overview
The FHOPE heavy load reclining and rotating pallet inverter is a stationary machine designed for wide and heavy pallet loads that cannot be safely inverted by a standard single-clamp unit. It works on a two-motion principle: the load is reclined 90 degrees onto its back, centered on a turntable, then rotated 180 degrees before being returned upright. Single or dual clamping is offered depending on the load's dimensions and weight, and the machine is usually supplied as a fully automated and guarded system.
Because wide, heavy, or low-rigidity loads often need support on more than one face during inversion, the recline-then-rotate sequence spreads the handling stress across the machine structure rather than concentrating it on a single clamp point. Capacity, table size, and clamping configuration are all defined per project, based on each customer's load length × width × height and weight.
Representative Configuration
## Key Specifications
Representative configuration for this reclining and rotating series:
| Item | Specification |
| --- | --- |
| **Machine type** | Stationary reclining and rotating pallet inverter |
| **Motion sequence** | 90° recline onto back, then 180° turntable rotation, then return to initial position |
| **Clamping** | Single clamping or dual clamping (per project) |
| **Load suitability** | Wide and heavy pallet loads |
| **Load definition** | Defined per project — based on customer's load L × W × H and weight |
| **Supply form** | Usually fully automated and guarded system |
| **Load entry** | Configured to match customer's in-plant handling (lifter, forklift, etc.) |
| **Pallet swap** | Manual or assisted removal of the original pallet from the upper face after full 180° inversion, or per project workflow |
Specifications shown are representative; final details are confirmed per project.
See **More Data** for application fit, safety, RFQ items, comparisons, and FAQs. ↑
Operating Sequence
## How It Works
The reclining and rotating pallet inverter follows a clear six-step cycle:
1. ### Load entry
A forklift or other in-plant handling method delivers the wide, heavy pallet load into the machine.
2. ### Clamping
The load is gripped using single or dual clamping, selected during project engineering according to the load's dimensions and weight.
3. ### 90° recline
The clamp assembly lifts and turns the load to 90 degrees, laying it down with the load face centered over the turntable. After the 90° recline the load is centered over the turntable so the center of gravity projects onto the slewing bearing, keeping rotation torque symmetric.
4. ### 180° rotation
The turntable rotates the load 180 degrees on its top face, reversing the load's orientation.
5. ### Return and release
The machine returns the load to the initial upright position and releases the clamp, allowing the unwanted pallet to be swapped out.
6. ### Automated operation
The machine is typically delivered as a fully automated, guarded system integrated into the customer's plant handling layout, whether loads arrive by lifter, forklift, or other means.
The result is a full pallet reversal — bottom to top — suitable for wide and heavy loads where a conventional clamp-only inversion would put excessive stress on the product or the machine.
More Data
## Technical & RFQ Data
Protection & Control
## Safety & Operation
### Guarded automation
Machines of this type are usually supplied as fully automated and guarded systems, with guarding surrounding the motion zone during the recline and rotation cycle.
### Plant handling integration
The machine is engineered around the customer's existing handling method — forklift entry, lifter, or other in-plant transport — so load entry and exit are matched to how your operators already work.
### Operator training
Operators should be trained on the clamping selection and cycle sequence for each load type; incorrect clamp configuration for an undersized or oversized load is the main operational risk to avoid.
### Warranty
A standard 1-year warranty applies; extended warranty terms may be offered on selected models during promotional periods.
Engineering Input
## Five RFQ Items
When requesting a quotation, please provide:
01
### Load and pallet dimensions
Length × width × height of the palletized load, plus pallet style and dimensions (entry type, bottom runner layout), load overhang, and target replacement pallet specification.
02
### Load weight
Total weight per pallet, including the pallet.
03
### Load description
Product type, packaging form (bags, boxes, wrapping), and whether the load is self-supporting when inverted.
04
### Handling method
How loads arrive and leave the machine (forklift, lifter, conveyor, other).
05
### Automation and guarding requirements
Whether you need the fully automated, guarded configuration or a simpler manual-assist setup, plus single or dual clamping preference.
Application Check
## When It Fits
Use these criteria to decide whether the reclining and rotating type is the right machine for your load:
| Criterion | Why It Matters |
| --- | --- |
| **Wide loads.** | If your pallets are wider than a standard footprint, a single-clamp machine may not grip or support them adequately. The recline-rotate design with dual clamping is intended for these wide, heavy loads. |
| **Heavy loads needing distributed support.** | The 90° recline first lays the load down and centers it on the turntable, so the inversion stress is not carried by one clamp face alone. |
| **Full reversal required.** | When the goal is turning the load completely over to replace a pallet, the 90°-plus-180° sequence delivers that. |
Application Boundaries
## Limits
### Load self-support is a prerequisite.
As with clamp-type inversion generally, the load must be capable of holding together when turned — bagged goods, boxed goods, or wrapped loads are typical candidates; loose or free-flowing product may not be suitable.
### Foundation and dynamic loads.
Due to dynamic load distribution during the 90° recline and rotation, a reinforced concrete foundation is required per project drawing.
### No published rated capacity or cycle time.
FHOPE does not publish a fixed rated load or throughput figure for this machine; capacity and cycle time are defined per project based on your load L × W × H and weight.
### Representative configuration.
The specification above reflects a representative configuration. Dual clamping, guarding, and automation level are engineering choices made per order, not fixed features of every unit.
### Footprint and integration.
As a stationary reclining-rotating machine, it requires more floor space than a simpler clamp-rotate unit; layout is confirmed during project design.
Selection Guide
## How It Differs from Related Machines
How this model differs from others in the FHOPE range:
### A-series single-clamp 180° pallet inverter
The economical choice for standard-sized loads; see the [180° pallet inverter](https://www.fhopepack.com/pallet-inverter/stationary/180-pallet-inverter.html) for the fixed stationary version, or the [Economic Pallet Exchanger](https://www.fhopepack.com/pallet-inverter/stationary/Pallet-Inverter1.html) in the same stationary family.
### 95° pallet exchanger (changer family)
For loads that only need a side tilt to swap pallets, not a full 180° inversion; see the [pallet exchanger](https://www.fhopepack.com/pallet-inverter/changer/pallet-exchanger.html).
### V-shape pallet changer
A 90° side-tilt machine for pallet and load exchange without full inversion; see the [V-shape pallet changer](https://www.fhopepack.com/pallet-inverter/changer/V-shape-pallet-changer.html).
If your loads are standard-sized and rigid, start with the 180° inverter. If they are wide, heavy, or benefit from two-sided clamping, the reclining and rotating type on this page is the appropriate selection.
Common Questions
## FAQ
1. What does "reclining and rotating" mean in practice?
The machine first reclines the load 90 degrees onto its back, centers it on a turntable, then rotates it 180 degrees, and finally returns it to the upright initial position. This two-motion sequence suits wide and heavy loads.
2. When should I choose dual clamping instead of single clamping?
Dual clamping is selected when the load's width, height, or weight requires support on both sides during the recline and rotation. The choice is made per project based on your load L × W × H and weight.
3. What is the rated load capacity?
There is no single published capacity figure. Capacity is defined per project — engineered around your specific load dimensions and weight.
4. How is this different from the 180° pallet inverter?
The 180° pallet inverter is a single-clamp, economical machine for standard loads. The reclining and rotating type on this page is intended for wide and heavy loads, with the option of dual clamping and a recline-first motion that distributes load stress during inversion.
5. Can it replace only the bottom pallet without turning the load?
No — this machine performs a full inversion (90° recline + 180° rotation). If you only need a side-tilt pallet swap, a 95° pallet exchanger or V-shape pallet changer may be more appropriate.
6. Is the machine supplied with guarding and automation?
Yes — this machine is usually supplied as a fully automated and guarded system, configured to your plant's handling method.
7. What warranty is included?
A 1-year standard warranty applies. Longer warranty terms may be available on selected models during promotional periods — confirm at quotation.
## Trusted by Steel Mills & Industry Leaders
Global manufacturers rely on FHOPE heavy duty packaging equipment
         
## Ready to optimize your packaging line?
Get a custom quote with ROI analysis. Our engineers respond within 24 hours.
- Free layout design
- Global installation support
- 2-year warranty included
Our team will reply in 24 hours ASAP
Oops...! some problem!
Get My Free Quote
Your information is secure and will never be shared.
## Related Machines
← →
M
Mike from FHOPE
Typically replies instantly
×
Hello! How can I assist you today?
[Chat on WhatsApp](https://wa.me/8615021705930)
```json
{
"product": {
"name": "Heavy Load Reclining Pallet Inverter",
"brand": "FHOPEPACK",
"description": "The Heavy Load Reclining Pallet Inverter is designed to handle wide and heavy palletized loads by tilting and rotating them 180 degrees. This machine facilitates quick and easy pallet replacement, enhancing operational efficiency and safety in industrial settings.",
"url": "https://www.fhopepack.com/pallet-inverter/stationary/Heavy-Load-Reclining-Pallet-Inverter.html",
"image": "https://www.fhopepack.com/images/Heavy-Load-Reclining-Pallet-Inverter.jpg",
"price_range": {
"manual": "$3,000–$8,000",
"semi_automatic": "$10,000–$20,000",
"fully_automatic": "$25,000–$50,000+"
},
"specifications": {
"max_load_capacity": "15 tons",
"clamping_system": ["Single", "Dual"],
"clamping_pressure": "Adjustable",
"clamping_height_sensor": "Yes",
"turntable_rotation": "180 degrees",
"power_supply": "380V, 50Hz, 3-phase",
"hydraulic_system": "Integrated",
"finish": "Painted",
"installation": "Fixed on ground"
},
"features": [
"Handles wide and heavy loads up to 15 tons",
"Dual clamping system for enhanced stability",
"Adjustable clamping pressure with load height sensor",
"180-degree turntable rotation for efficient pallet replacement",
"Fully automated system with manual override option",
"Designed for integration with forklifts, lifters, and other handling tools"
],
"applications": [
"Replacing damaged pallets in manufacturing lines",
"Switching between different pallet types for shipping",
"Handling large and heavy palletized goods in warehouses"
],
"industries": [
"Steel manufacturing",
"Paper and packaging",
"Automotive parts",
"Logistics and warehousing"
],
"safety_features": [
"Overload protection",
"Phase failure protection",
"Current limiting valve",
"Protective netting",
"Control power supply at AC24V"
],
"warranty": "2 years",
"after_sales_support": [
"Installation and commissioning",
"Operator training",
"Technical support",
"Spare parts availability"
]
},
"seo": {
"title": "Heavy Load Reclining Pallet Inverter - FHOPEPACK",
"description": "Discover FHOPEPACK's Heavy Load Reclining Pallet Inverter, designed for efficient and safe handling of wide and heavy palletized loads. Enhance your material handling operations with our reliable and durable solutions.",
"keywords": [
"heavy load pallet inverter",
"reclining pallet inverter",
"pallet inverter for heavy loads",
"industrial pallet inverter",
"FHOPEPACK pallet inverter"
]
}
}
{
"product": {
"name": "Heavy Load Reclining Pallet Inverter",
"brand": "FHOPEPACK",
"description": "The Heavy Load Reclining Pallet Inverter is designed to handle wide and heavy palletized loads by tilting and rotating them 180 degrees. This machine facilitates quick and easy pallet replacement, enhancing operational efficiency and safety in industrial settings.",
"url": "https://www.fhopepack.com/pallet-inverter/stationary/Heavy-Load-Reclining-Pallet-Inverter.html",
"image": "https://www.fhopepack.com/images/Heavy-Load-Reclining-Pallet-Inverter.jpg",
"price_range": {
"manual": "$3,000–$8,000",
"semi_automatic": "$10,000–$20,000",
"fully_automatic": "$25,000–$50,000+"
},
"specifications": {
"max_load_capacity": "15 tons",
"clamping_system": ["Single", "Dual"],
"clamping_pressure": "Adjustable",
"clamping_height_sensor": "Yes",
"turntable_rotation": "180 degrees",
"power_supply": "380V, 50Hz, 3-phase",
"hydraulic_system": "Integrated",
"finish": "Painted",
"installation": "Fixed on ground"
},
"features": [
"Handles wide and heavy loads up to 15 tons",
"Dual clamping system for enhanced stability",
"Adjustable clamping pressure with load height sensor",
"180-degree turntable rotation for efficient pallet replacement",
"Fully automated system with manual override option",
"Designed for integration with forklifts, lifters, and other handling tools"
],
"applications": [
"Replacing damaged pallets in manufacturing lines",
"Switching between different pallet types for shipping",
"Handling large and heavy palletized goods in warehouses"
],
"industries": [
"Steel manufacturing",
"Paper and packaging",
"Automotive parts",
"Logistics and warehousing"
],
"safety_features": [
"Overload protection",
"Phase failure protection",
"Current limiting valve",
"Protective netting",
"Control power supply at AC24V"
],
"warranty": "2 years",
"after_sales_support": [
"Installation and commissioning",
"Operator training",
"Technical support",
"Spare parts availability"
]
},
"seo": {
"title": "Heavy Load Reclining Pallet Inverter - FHOPEPACK",
"description": "Discover FHOPEPACK's Heavy Load Reclining Pallet Inverter, designed for efficient and safe handling of wide and heavy palletized loads. Enhance your material handling operations with our reliable and durable solutions.",
"keywords": [
"heavy load pallet inverter",
"reclining pallet inverter",
"pallet inverter for heavy loads",
"industrial pallet inverter",
"FHOPEPACK pallet inverter"
]
}
}
{
"@context": "https://schema.org/",
"@type": "Product",
"name": "Reclining And Rotating Pallet Inverter For Wide And Heavy Pallet",
"image": "https://www.fhopepack.com/blog/wp-content/uploads/2023/02/heavy-load-reclining-pallet-inverter-zt.webp",
"description": "Reclining And Rotating Pallet Inverter In Stationary Type Is For Heavy Load Tipping In 90 Degree Onto The Back. It Is Spececial Designed For Wide And Heavy Pallet.",
"review": {
"@type": "Review",
"reviewRating": { "@type": "Rating", "ratingValue": 5, "bestRating": 5 },
"author": { "@type": "Person", "name": "Wrapper" }
},
"offers": {
"@type": "AggregateOffer",
"url": "https://www.fhopepack.com/pallet-inverter/stationary/Heavy-Load-Reclining-Pallet-Inverter.html",
"offerCount": 5,
"priceCurrency": "USD",
"lowPrice": "2808",
"highPrice": "12000"
},
"aggregateRating": {
"@type": "AggregateRating",
"ratingValue": 5.0,
"reviewCount": 24
}
}
{
"@context": "https://schema.org/",
"@type": "BreadcrumbList",
"itemListElement": [{
"@type": "ListItem", "position": 1, "name": "FHOPEPACK Machinery", "item": "https://www.fhopepack.com"
},{
"@type": "ListItem", "position": 2, "name": "Stationary Pallet Inverter", "item": "https://www.fhopepack.com/pallet-inverter/stationary"
},{
"@type": "ListItem", "position": 3, "name": "Reclining And Rotating Pallet Inverter For Wide And Heavy Pallet", "item": "https://www.fhopepack.com/pallet-inverter/stationary/Heavy-Load-Reclining-Pallet-Inverter.html"
}]
}
```