180°パレットインバーターおよびパレット交換器

1. インフィード: The loaded pallet is placed on the machine table. Forklift and conveyor infeed are standard interface options. Because the fixed table has a working height and a frame, hand pallet trucks or carts may require a ramp, or a pit / low-table configuration — this is decided per project.
2. クランプ： The upper and lower plates close on the load. Clamping pressure is set to suit the packaging, not higher than it needs to be.
3. 回転： The load, locked in the clamps, rotates 180°; position sensors confirm each position. The load is now upside down, with the original pallet on top.
4. Pallet swap: The exposed original pallet is removed, and the replacement pallet is placed on the uppermost face of the inverted load. It will sit under the goods again as the load rotates back.
5. Return and outfeed: The load rotates back and the clamps open; the goods leave on the new pallet by the infeed method configured for your project.

• 操作： 180° rotation; twin upper + lower clamping; adjustable clamping pressure; automatic load locking
• Load footprint (pallet + goods): L 1200 × W 1100–1200 mm
• Load height: H 1200–2000 mm
• Clamping travel: Sized to the load height (per project)
• 最大荷重： 1.2 t (representative configuration level; confirmed per project)
• サイクルタイム： Approx. 50 s per cycle (representative configuration; final value confirmed in the quotation)
• 電気： 2.2 kW、380V / 50Hz
• インフィード: Forklift or conveyor (standard options); ramp / pit / low-table for pallet-truck feeding (per project)
• 安全機能： Position sensors; emergency stop

These are manufacturer-nominal values for a representative configuration and are given as a selection reference only. Every project is quoted against your actual load data.

• Inversion tolerance: Both product and packaging must accept being upside down for the duration of the cycle. This is the primary risk boundary of the 180° type.
• Clamping pressure: Pressure must match the crush strength of your packaging. Brittle cartons and soft or unstable loads: send packaging details so clamping pressure can be calibrated before ordering.
• 冷凍食品: Frozen food is a listed application; confirm with your packaging data that frozen packaging tolerates inversion and clamping for your working sequence.
• Ceramics, glass and unstable stacks: Only stable, fully enclosed packaging should be run through a 180° cycle; otherwise a 95° tilt type may be the safer choice.
• Electronics / ESD: Grounding lugs and static-dissipation provisions are engineered per project specification.
• 入力方法: The fixed table height and frame mean pallet-truck feeding may require a ramp or a pit / low-table build, decided per project. Forklift and conveyor infeed are standard options — state your method in the inquiry.
• Load envelope and supply: Loads beyond the representative footprint, height or 1.2 t class, and supplies other than 380V / 50Hz, are engineered per project.
• サイクルタイム： The approx. 50 s figure is a representative-configuration value, not a commitment; the actual cycle time depends on the load and the infeed method.

• After an emergency stop the load must remain held by the clamps; resuming the cycle is a controlled procedure performed per the manual.
• Inspect the clamping plates, the rotating assembly, the hydraulics and the guards according to the maintenance plan.
• Operate within the manual's load ratings and the machine's load envelope.

Send these five items so the reply is a per-project confirmation rather than a generic answer:

1. 商品の寸法： L × W × H — state clearly whether measured with or without the pallet.
2. パレットを含む総重量。
3. 読み込み方法： forklift, hand pallet truck, or conveyor line.
4. Photos of the loaded pallet(s).
5. 特別な制約事項： may the goods be inverted, tilted or clamped? Frozen environment, cleanroom, anti-static, or other restrictions?

With these five, we confirm the machine type (180°, 95° tilt, or push-type), the infeed configuration, and the final specifications in your quotation.

Will inversion damage my goods?
Inversion tolerance is the first selection criterion: if the goods cannot be inverted, the 180° inverter is the wrong class. Where inversion is acceptable, clamping pressure remains a second risk to manage — it is adjustable and calibrated against your packaging, and fragile or soft loads should be reviewed with packaging details first.

What cycle time can I expect?
Approx. 50 s per cycle in the representative configuration. This is a selection-reference figure; the final cycle time depends on your load and infeed method and is confirmed in the quotation.

We feed by hand pallet truck, not forklift. Does that work?
Yes, but it must be configured: the fixed table has a working height and frame, so pallet-truck feeding may require a ramp or a pit / low-table configuration, decided per project. Forklift and conveyor infeed are standard options — state your method in item 3 of the inquiry.

What load size and weight does it handle?
The representative configuration covers pallet + goods up to L 1200 × W 1100–1200 mm, height 1200–2000 mm, and a maximum load of 1.2 t — a representative class, confirmed per project against your actual data.

Can it be integrated into a conveyor line?
Yes. Conveyor interfacing is an available standard option; the roller-bed height, motor synchronization and conveyor interlock controls are confirmed per project.

Are other power supplies supported besides 380V / 50Hz?
Yes. The representative configuration is 380V, 50Hz, 3-phase; other industrial voltages (for example 220V, 415V or 480V at 60Hz) are engineered per project.

保証とは何ですか？
The standard warranty is 1 year. A 2-year warranty applies only to selected models during a promotional period; your quotation states the warranty that applies to your machine.