מכונת עטיפת משטחים ומשקל

תקציר מנהלים Weighing and wrapping at one station saves a forklift move and eliminates a second floor position. The turntable pallet wrapper applies stretch film around a palletized load while an integrated digital weighing display on the column indicates load weight. Net cargo weight is determined from the קריאה גסה minus the pallet tare and film weight. The integrated digital scale is configured to match application load requirements, verifying shipment weight to help prevent freight billing discrepancies [manufacturer rating].

תוכן העניינים

• Machine Layout and Weighing Display
• How Weighing and Wrapping Work Together
• Net Weight from the Gross Reading
• Stretch Film Laid per Load
• בקרות ובטיחות
• Selection Checklist for a Pallet Wrapper with Scale
• שאלות נפוצות בנושא הנדסה
• שלב הבא
• קריאה קשורה
• מקורות

Machine Layout and Weighing Display

The machine layout integrates a motorized structural turntable with an upright mast column. The palletized load is loaded directly onto the turntable surface by forklift or pallet jack. During the wrapping cycle, the carriage travels vertically along the mast while the turntable rotates, applying clear stretch film around the unitized cargo in an overlapping spiral pattern.

An industrial digital weight indicator is mounted directly on the mast column, providing an immediate gross reading of the pallet load. Once the preset wrapping pattern is complete, the carriage returns to its base home position and the film is severed. The automated operating cycle executes without requiring direct operator intervention during rotation.

How Weighing and Wrapping Work Together

Integrating stretch wrapping and load-cell weighing into a single machine streamlines warehouse packaging operations, saves cycle time, and confirms correct shipping weight to help reduce transport surcharges [manufacturer rating].

Executing both weighing and wrapping at one physical station means each load is handled once instead of twice.

Net Weight from the Gross Reading

Integrated scale systems verify certified shipping weights prior to truck staging. Net cargo weight is derived by deducting pallet tare and applied packaging film from the total gross measurement.

דוגמה להמחשה:

If gross weight is recorded on the turntable scale before initiating the wrapping cycle, the stretch film weight is excluded from the tare deduction.

Stretch Film Laid per Load

Film consumption per unit load depends on package dimensions, total turntable revolutions, and the pre-stretch elongation ratio set at the carriage rollers.

This represents the actual film perimeter laid on the load exterior; powered pre-stretch carriage systems dispense a shorter linear length from the supply roll to achieve this coverage.

בקרות ובטיחות

The turntable rotates heavy industrial loads while the film carriage traverses vertically along the mast. Operators must maintain clearance around the rotational perimeter while the equipment is energized and enter the wrapping zone only after the operating cycle has fully stopped. For turntable stretch wrappers, EN 415-6 establishes specific safety and guarding requirements.

Applicable compliance standards depend on the installation territory. For CE-regulated markets, ISO 12100 specifies mechanical risk-assessment procedures and EN 415-10 defines safety requirements for packaging machines.

Selection Checklist for a Pallet Wrapper with Scale

• המטען וגודל המשטח הכבדים ביותר.
• טווח שקילה והקריאה הדרושה לך.
• האם המשקל מודפס או נשלח למערכת שלך.
• גובה טעינה ותכנית סרט.
• עומסים לשעה.
• העמסת מלגזה או מלגזה.

שאלות נפוצות בנושא הנדסה

Q: Why weigh on the wrapper? A: Weighing and wrapping at one position handles each load once, eliminating redundant staging and extra forklift transport.

Q: How is net weight worked out? A: Gross minus pallet minus film: 1,025 − 25 − 0.6 kg gives 999.4 kg in our example.

Q: Should the load be weighed before or after wrapping? A: Either. After wrapping, subtract the film as in our example; before wrapping, leave it out.

ש: כמה סרט צילום לוקח לטעינה? A: Turns × load perimeter: about 53 m laid for 12 turns on a 1,200 × 1,000 mm load in our example; pre-stretch means the roll pays out less.

ש: איזה תקן בטיחות חל? A: For CE markets, EN 415-6 covers pallet wrapping machines.

שלב הבא

אנו מתכננים את עטיפת המשטחים שלכם עם קנה מידה בשלושה שלבים:

1. שלח את שרטוט הפריסה שלך עם גדלי עומס, משקלים ותפוקה ל info@fhopepack.com.
2. קבלו הצעה תוך 48 שעות, עם תוכנית השקילה והסרט.
3. הזמן סקר באתר כדי לבדוק את שיטת הטעינה ואת שטח הרצפה.

קריאה קשורה

• Semi-Auto Pallet Wrapping Machine Series — Overview of standard, scale-integrated, and low-profile turntable systems [manufacturer rating].
• Pallet Stretch Wrapping Machine with Scale A500 — Dedicated wrapping and weight verification station for shipping operations [manufacturer rating].
• מכונת עטיפת משטחים אוטומטית
• סרטון: מכונת עטיפת משטחים עם חיתוך אוטומטי של סרטים
• סרטון: מכונת עטיפת מתיחה חצי אוטומטית למשטחים A100

מקורות

• תוכן המכונה: צוות ההנדסה של FHOPE, 4.10.2026
• בטיחות עטיפת משטחים: EN 415-6
• דוגמאות למשקל ולסרט: דוגמאות מעשיות, ערכים להמחשה
• היקף התקנים: ISO 12100: 2010, EN 415-10: 2014
• Technical configuration: Pallet Stretch Wrapping Machine with Scale A500

נבדק לאחרונה: 04-10-2026

עודכן לאחרונה: 29-10-2026