Automatic Tire Strapping Machine on Online Conveyors

תקציר מנהלים Loose tire stacks lean and slide on pallets and in containers, so plants strap them into firm units. Our tire strapping machine in this video compresses a tire stack on the conveyor, then straps it and sends it on down the line. Strap per stack follows from the גובה הערימה ו tire OD. We set both per project.

תוכן העניינים

מה שהסרטון מראה

A stack of black tires stands on the conveyor under the press of our green-framed machine, with yellow safety panels around the moving parts. An operator works at the control area behind it.

The press plate comes down and compresses the stack, then the conveyor moves it to the strapping position, where a strap goes round it. The strapped stack leaves the machine, and the press and strapping unit reset for the next stack. The stack stays upright the whole time.

How the online strapping cycle works

שלב מה קורה
להגיע The tire stack stops under the press
לדחוס The press plate comes down on the stack
להזיז The conveyor carries the stack to the strapping position
רצועה A strap goes round the stack
לאפס The press and strapping unit reset
הזנה The strapped stack runs on

Compressing the stack first settles the tires, so the strap goes on a firm, even stack.

Strap use per tire stack

Illustrative example with two vertical bands:

פריט ערך
Tire OD (illustrative) 650 מ"מ
Tire width (illustrative) 200 מ"מ
Stack height, 6 × 200 1,200 מ"מ
אורך פס, 2 × (1,200 + 650) 3,700 מ"מ
Strap per stack, 2 × 3.7 m 7.4 מ

Add the seal overlap to each band when you order strap.

Settings per tire size

הגדרת למה זה משנה
Press stroke Matches the stack height
כוח לחץ Firm stack without marking the tires
Bands per stack How well the stack holds in handling
Conveyor stop position Centres the stack under the press

We set these on trial with your tire sizes and keep them as recipes. For smaller tires, see our automatic motorcycle tire strapping line.

בקרות ובטיחות

The press comes down with force and the strap is under tension. Keep hands out of the press and strapping area while the machine runs, and clear a stack only with it stopped.

התקנים החלים תלויים בשוק היעד. עבור שווקי CE, ISO 12100 קובע את שיטת הערכת הסיכונים ו-EN 415-10 קובע דרישות כלליות למכונות אריזה.

Selection checklist for an online tire strapping machine

  • Tire OD, width and weight range.
  • Tires per stack.
  • Bands per stack.
  • Stacks per hour.
  • Conveyor height and line layout.
  • Strap type and width.

שאלות נפוצות בנושא הנדסה

Q: Why compress the stack before strapping? A: So the tires settle and the strap goes on a firm, even stack.

Q: How much strap does a stack take? A: About 7.4 m for two bands on a 1,200 mm high stack of 650 mm OD tires in our example.

Q: Does the stack stay upright? A: Yes. It stays upright from infeed to outfeed.

Q: Can it handle different tire sizes? A: Yes, with press stroke, force and stop position stored per size.

Q: How is the machine guarded? A: Yellow safety panels cover the moving parts.

שלב הבא

We plan your tire strapping machine in three steps:

  1. שלח את שרטוט הפריסה שלך with tire sizes, stacks and output to info@fhopepack.com.
  2. קבלו הצעה תוך 48 שעות, with the press and band plan.
  3. הזמן סקר באתר to check the conveyor layout.

מקורות

נבדק לאחרונה: 04-10-2026

הודעות קשורות

הזמינו שיחה
הזמינו שיחה