Panoramica
A coated coil packing machine wraps a coated steel coil — such as color-coated or pre-painted strip — in stretch film or paper on a dedicated wrapping station, so the finished surface stays protected from handling marks, dust and moisture from the line to the customer. The video below shows the coil wrapping station in the family: the coil sits on a roller platform while a carriage orbits it to apply the wrap. This guide covers what the machine does, what to specify, and what to verify before acceptance, for coil mill engineers and coil-line buyers.
Why Pack Coated Coils Differently
Coated strip has a finished paint film that must not be scratched:
| Risk to a coated coil | How the packing machine answers |
|---|---|
| Surface contact and scuffs | Film/paper applied in a controlled pass before handling |
| Danni ai bordi | Edge protection can be added in the wrapping cycle |
| Dust and moisture in transit | Full wrap and, where needed, a cover |
| Operator handling marks | Automatic station replaces hand wrapping |
How the Wrapping Station Works
| elemento | Ciò che fa |
|---|---|
| Supporto della bobina | A roller platform holds and rotates the coil so every side is reachable. |
| Film/paper carriage | A carriage orbits the coil, applying the protective wrap in consistent layers. |
| Morsetto e taglio della pellicola | The wrap is clamped, cut and sealed at the end of the cycle. |
| Programma PLC | Layer counts and overlap are stored per coil spec. |
The machine family is supplied as manual, semi-automatic and in-line stations; the right level is chosen from coil size, volume and line speed, and confirmed per project.
Cosa specificare
| Ingresso | Perché è importante |
|---|---|
| Coil OD/ID, width, weight | Sets platform, carriage and wrapping ring geometry. |
| Film or paper and gauge | Sets the dispenser and seal settings. |
| Avvolgi gli strati e sovrapponi | Imposta il programma e la durata del ciclo. |
| Flusso del ciclo | Sets automation level (manual to in-line). |
| Edge/eye protection | Sets whether added protectors are integrated. |
| Interfaccia di linea | Sets conveyor feed and PLC hand-off. |
Collaudo e accettazione in fabbrica
- Prove dell'intero ciclo. A test log of complete wrap cycles (rotate, apply, clamp, cut, seal).
- Corsa prolungata. The vendor’s stated practice on this family includes near-continuous pre-delivery testing (up to about 24 hours where stated).
- Controllo e sicurezza. Smooth, responsive control; emergency stop verified; guarding around the moving carriage.
- Surface check. Evidence that the wrap pass did not mark the coated surface during testing.
- La messa in produzione. Descrizione scritta dell'installazione, della messa in servizio e dell'assistenza in loco.
- Confezionamento in bobina: funzionamento e applicazioni – The full coil packing sequence.
- Macchina per la rimozione delle reggette – Coil handling at the start of a line.
- Soluzioni per ribaltamento bobine e movimentazione industriale – Coil handling equipment in the same family.
On arrival repeat: empty cycle, loaded cycle, emergency stop, surface check.
FAQ
D: Si può avvolgere con carta invece che con pellicola?
A: Yes, depending on the dispenser. State the material and gauge when specifying so the carriage and seal unit match it.
Q: Does it handle the coil rotation itself?
A: On powered-roller stations the coil rotates under the carriage; manual stations rotate by operator. This is a project choice.
D: Quali norme di sicurezza si applicano?
A: The machine family is designed with EN 415-10 as the packaging-machinery safety reference and an ISO 12100 risk assessment for the moving carriage.
Passo successivo
Send coil OD/ID/width/weight, film or paper type, wrap layers, throughput and line interface so the station is sized on the approval drawing.
