> **Ringkasan Eksekutif**
> This clip shows our automatic film sleeving and palletizing system for long, heavy rolls. Rolls run along a green conveyor, a sleeving station draws a tube of film over each roll, and a robot in a fenced cell lifts the sleeved rolls onto pallets. We cover the roll surface with a film sleeve, so no heat tunnel is needed. Roll length, weight and pallet pattern are set per project, so we size each line from your rolls.
Daftar Isi
- Apa yang ditunjukkan dalam klip tersebut
- Mengapa rol film dibungkus dengan selongsong?
- Panjang film dan beban palet
- Apa yang kami tetapkan per proyek
- Daftar periksa pemilihan
- Safety/keselamatan
- Pertanyaan yang Sering Diajukan (FAQ) tentang Teknik
- Langkah selanjutnya
- Bacaan terkait
- sumber
Apa yang ditunjukkan dalam klip tersebut
Klip tersebut mengikuti satu gulungan dari konveyor ke palet.
| Langkah | Apa yang Anda lihat |
|---|---|
| Infeed | Long black rolls run along a green conveyor inside a guarded area |
| Sleeving | At the sleeving station, a tube of clear film is drawn along the roll |
| Transfer | The sleeved roll moves on to the palletizing cell |
| Palletizing | A blue robot in a fenced cell picks each roll and places it on a pallet |
| Result | Rolls stand in rows on the pallet, ready to be moved out |
Mengapa rol film dibungkus dengan selongsong?
- **Full surface cover.** The film tube covers the whole roll surface against dust and moisture.
- **No heat.** Sleeving needs no shrink tunnel, so heat-sensitive roll goods are not exposed to hot air.
- **Clean handling.** The robot grips a covered roll, so the roll surface is not touched.
- **One line.** Sleeving and palletizing run on one conveyor, with no forklift or crane between them.
Panjang film dan beban palet
**Contoh soal (ilustrasi).**
| Barang | Nilai |
|---|---|
| Roll (illustrative) | 2,000 mm long, 300 mm diameter |
| Film tube per roll, 2,000 + 2 × 150 mm end overlap | 2,300 mm |
| Pallet (illustrative) | 1,200 × 1,000 mm |
| Rolls standing on end per pallet, (1,200 ÷ 300) × 3 rows across 1,000 mm | 12 rolls |
Kami menentukan lebar film, tumpang tindih ujung, dan pola penumpukan berdasarkan ukuran gulungan dan palet Anda.
Apa yang kami tetapkan per proyek
| Pengaturan | Tergantung pada |
|---|---|
| Sleeve film size | Roll diameter and length |
| Robot gripper | Roll weight and surface |
| Stacking pattern | Pallet size and roll size |
| Conveyor length | Roll length and buffer |
| Pallet handling | Manual or automatic pallet feed |
Daftar periksa pemilihan
- [ ] Roll length, diameter and weight.
- [ ] Core size, if the robot grips the core.
- [ ] Film type and thickness.
- [ ] Rolls per hour.
- [ ] Pallet size and stacking pattern.
- [ ] Floor space for the robot cell.
Safety/keselamatan
- The robot works inside a fenced cell; stop the cell before entering.
- Keep clear of the sleeving station while it runs.
- Stop the conveyor before clearing a film jam.
- Untuk pasar CE, lini produksi ini dirancang sesuai dengan standar ISO 12100 dan EN 415-10.
Pertanyaan yang Sering Diajukan (FAQ) tentang Teknik
Q: What does this line do?
A: It sleeves long, heavy rolls in a tube of film and stacks them on pallets with a robot.
Q: Why sleeve instead of shrink wrap?
A: Sleeving covers the roll without a heat tunnel, so the roll is not exposed to hot air.
Q: How is the film tube length set?
A: Roll length plus an overlap at each end; a 2,000 mm roll with 150 mm overlaps takes about 2,300 mm in the worked example.
Q: How many rolls fit on one pallet?
A: It depends on roll diameter and pallet size; 12 rolls of 300 mm diameter stand on a 1,200 × 1,000 mm pallet in the worked example.
Q: How is the robot made safe?
A: It works inside a fenced cell with guarded access.
T: Standar mana yang berlaku?
A: Untuk pasar CE, ISO 12100 dan EN 415-10.
Langkah selanjutnya
Kami menentukan ukuran lini pengemasan gulungan dan paletisasi dalam tiga langkah:
1. **Submit your layout drawing** with roll sizes, weights, rolls per hour and pallet size, to **info@fhopepack.com**.
2. **Receive a proposal within 48 hours** with the machine plan and layout.
3. **Book a site survey** so we confirm the cell layout.
Bacaan terkait
- [Mesin Gantry Penumpuk dan Paletisasi Gulungan Baja Otomatis](https://www.fhopepack.com/videos/eliminating-bottlenecks-why-your-steel-processing-center-needs-an-automated-coil-stacking-line/)
- [PE Top Sheet Dispenser for Automatic Pallet Covering](https://www.fhopepack.com/videos/how-pe-sheet-dispenser-for-automatic-pallet-covering/)
- [Orbital Stretch Wrapper for Bales](https://www.fhopepack.com/videos/how-to-use-an-orbital-stretch-wrapper-for-baling-packing/)
- [Jalur pengemasan otomatis](https://www.fhopepack.com/Automatic-Packing-Line/)
sumber
- Konten mesin: Tim teknik FHOPE, 10 Oktober 2026
- Clip: [the video on YouTube](https://www.youtube.com/watch?v=5w22pgugoiY)
- Film length and pallet load: our worked example, illustrative values
- Ruang lingkup standar: ISO 12100:2010; [EN 415-10:2014](https://www.nen.nl/en/nen-en-415-10-2014-en-191845)
- Waktu pengajuan proposal: persetujuan CTA rumah (proposal dalam waktu 48 jam)
Terakhir ditinjau: 10-10-2026
