> **Ringkasan Eksekutif**
>
> A shrinking line feeds a long-shape box bag wrapped in film through a heat shrink tunnel, contracting the film around the package on the conveyor.
Daftar Isi
- Apa fungsi mesin ini?
- Rangka dan penggerak
- Siklus dan pembungkus
- Apa yang didukung oleh cuplikan demo tersebut?
- Ukuran dan konfigurasi
- Operasi dan keamanan
- Pertanyaan yang Sering Diajukan (FAQ) tentang Teknik
- Langkah selanjutnya: Daftar periksa RFQ
- Bacaan terkait
- Sumber dan standar
Apa fungsi mesin ini?
A long-shape box bag wrapped in film needs the film shrunk tight before it can be stacked or shipped. This line class feeds the package through a heat shrink tunnel on a conveyor, so the film contracts around the load without manual work.
Use this page to decide whether a shrinking line fits your package flow, and to see which data FHOPE asks for to size one.
Rangka dan penggerak
The machine has a long conveyor section with a blue protective cover, a control panel, a yellow warning label on the side, and floor markings with a green safety-exit sign.
Tunnel temperature and conveyor speed are set in the sizing step.
Siklus dan pembungkus
The cycle starts with the operator placing a long rectangular cardboard box wrapped in clear plastic film onto the belt. The package travels into the tunnel, the hinged top cover is closed, and internal heating elements and rollers shrink the film around the load.
The box in the clip is a table-frame pack secured with white plastic straps; package size range is confirmed in the sizing step.
Apa yang didukung oleh cuplikan demo tersebut?
The clip shows a cardboard box wrapped in clear plastic film fed into the machine's conveyor, and the top cover opened to reveal the heating elements and rollers.
It is a general demonstration. It does not show rated tunnel temperature, conveyor speed, max package size, cycle time, or model designation. Those points are confirmed in the enquiry, not assumed.
Ukuran dan konfigurasi
Mesin ini ukurannya ditentukan berdasarkan rentang beban dan lokasi Anda, bukan berdasarkan pelat peringkat tetap. Konfirmasikan hal berikut dengan FHOPE dalam permintaan Anda:
| Data to confirm | What it determines |
| :--- | :--- |
| Load weight and size range (kg, mm) | Frame, drive and station sizing |
| Consumable type and grade | Consumable stock and tension settings |
| Loads per shift | Line sizing and cycle time |
| How the load enters and leaves | Loading equipment and layout |
| Electrical supply (voltage, phase, frequency) | Drive and control build. House-typical 380 V three-phase 50 Hz, 220 V single-phase option, confirmed on site |
Setiap baris dikonfirmasi sesuai dengan kondisi lokasi Anda sebelum pembangunan dimulai.
Operasi dan keamanan
Keep clear of the tunnel and conveyor while the line runs, and check the belt and heating section per the machine manual. Stop the line and isolate the power supply before clearing a jam or reaching into the tunnel, and apply lock-out per the site procedure before any service work. The machine carries a yellow warning label; floor markings and a green safety-exit sign mark the walkways.
Pertanyaan yang Sering Diajukan (FAQ) tentang Teknik
Q: What does this shrinking line do?
A: It feeds a film-wrapped package through a heat shrink tunnel on a conveyor so the film contracts around the load.
Q: How is the package loaded?
A: An operator places the long rectangular cardboard box onto the belt; it travels into the tunnel automatically.
Q: What does the top cover do?
A: The hinged top cover opens to reveal the internal heating elements and rollers for maintenance.
Q: What packages does it take?
A: Long rectangular boxes wrapped in film; the clip shows a table-frame pack secured with white straps.
Q: What electric supply does it need?
A: The house-typical build is 380 V three-phase 50 Hz; light machines can be arranged at 220 V single phase. Confirm the site supply in the enquiry.
Langkah selanjutnya: Daftar periksa RFQ
1. Email info@fhopepack.com with your package size range.
2. State whether strapping or an extra shrinking stage is required.
3. Submit your layout drawing of the package infeed and outfeed area.
4. Receive a proposal with tunnel spec, coverage and cycle time within 48 hours, and book a site survey if you want the conveyor layout checked before the build.
Bacaan terkait
- [Lini produk mesin pengemas FHOPE](https://www.fhopepack.com/Products/)
- [Mesin Pengemasan dan Pengecilan Profil dan Panel Otomatis](https://www.fhopepack.com/videos/automatic-profile-and-panel-bagging-and-shrinking-line/)
- [Automatic Bar Wrapping Machine and Small Orbital Wrapper: Sizes, Speeds and Film Pitch](https://www.fhopepack.com/videos/automatic-bar-wrapping-machine-and-small-orbital-wrapper/)
- [Pallet Wrapping Machine with Automatic Film Cutting: Cycle, Film Use and Settings](https://www.fhopepack.com/videos/palllet-wrapping-machine-with-auto-film-cutting/)
Sumber dan standar
- [ISO 12100:2010 Keselamatan mesin, prinsip umum untuk desain dan penilaian risiko](https://www.iso.org/standard/51528.html)
- [EN 415-10:2014 Keamanan mesin pengemas, persyaratan umum](https://www.nen.nl/en/nen-en-415-10-2014-en-191845)
Standar yang berlaku bergantung pada pasar tujuan. Untuk pasar CE, ISO 12100 menetapkan metode penilaian risiko mesin dan EN 415-10 mencakup keselamatan mesin pengemasan.
Demonstration footage (video 36VolbchYu0) reviewed as a general machine demo; rated outputs are not shown in the clip and are therefore not quoted. Last reviewed: 2026-10-18.
