Ringkasan Eksekutif
A horizontal coil packaging machine wraps a metal coil on a rotating platform while a wrapping arm feeds the band over it. The operator places the coil on the platform, the machine runs the wrapping arm around the coil, and the wrapped coil is lifted off ready for the next stage. Coil size, band width and wrap settings are confirmed per project.
Daftar Isi
- Why wrap coils horizontally
- Apa yang dilakukannya
- How it works: platform and wrapping arm
- Siklus dan kontrol
- Apa yang ditunjukkan oleh rekaman tersebut
- Konfigurasi khas
- Daftar periksa pemilihan
- Operasi dan keamanan
- Pertanyaan yang Sering Diajukan (FAQ) tentang Teknik
- Langkah selanjutnya
- Bacaan terkait
- Sumber dan standar
Why wrap coils horizontally
Metal coils of strip, cable and wire are easy to scuff and rust when they move between processes. A tight band keeps the surface clean, holds the coil together, and slows corrosion during storage and transport.
Wrapping by arm is more even and repeatable than by hand, and the machine keeps running while the operator handles the next coil. Coil finish and band grade are confirmed per project.
Apa yang dilakukannya
The machine is a horizontal wrapper that holds a metal coil flat on a rotating platform. A wrapping arm travels in a ring around the coil, and a band from a side reel pays off over the coil as it turns.
The wrapped coil stops when the cycle is complete, ready to be lifted off the platform. Coil diameter, width and line speed are confirmed per project.
How it works: platform and wrapping arm
The rotating platform holds the coil flat and turns it during the wrap, while the wrapping arm orbits around the coil on a horizontal plane. The band reel sits beside the machine and pays off the band as the arm moves.
A control panel at the front carries the touchscreen and buttons that start the cycle and set the wrap count. A metal mesh guard surrounds the wrap zone during the run. Arm reach and band path are confirmed per project.
Siklus dan kontrol
The operator places the coil on the platform, closes the guard, and starts the cycle. The arm runs around the coil for the set number of orbits, the platform turns the coil so the band covers it evenly, and the machine stops when the wrap is complete.
The wrapped coil then sits on the platform waiting to be lifted off. The panel sets the wrap count and arm speed, and the guard stays closed while the arm runs. Wrap count is confirmed per project.
Apa yang ditunjukkan oleh rekaman tersebut
Our footage shows an operator placing a coil on the rotating platform while band pays off the side reel. The wrapping arm orbits around the coil and covers it evenly, and the machine stops with the coil fully wrapped and waiting for removal.
A mesh guard surrounds the wrap zone during the run. It is a general demonstration, so your coil size, band width and wrap settings are confirmed with us per project.
Konfigurasi khas
Angka-angka di bawah ini mencantumkan batasan desain fungsional, bukan nilai numerik, dan dikonfirmasi per proyek.
| Parameter | Kisaran tipikal, dikonfirmasi per proyek. |
|---|---|
| Produk | metal coils of strip, cable or wire on the rotating platform |
| Pita | wrapping band reel on the side, band pays off during the wrap |
| Platform | rotating platform holds the coil flat and turns it |
| Bungkus | wrapping arm orbits the coil to cover it evenly |
| Transfer | coil set on the platform, wrapped coil lifted off |
| kontrol | control panel with touchscreen and buttons at the front |
| Penjaga | metal mesh guard surrounds the wrap zone |
| Persediaan listrik | Tegangan 380 V tiga fasa 50 Hz, atau 220 V satu fasa untuk mesin ringan, dipilih sesuai proyek. |
Daftar periksa pemilihan
| Pertanyaan | Konfirmasi per proyek |
|---|---|
| Rentang kumparan | diameter, lebar, berat |
| Pita | jenis, lebar, tegangan |
| Bungkus | number of orbits, arm speed |
| kontrol | panel layout, guard interlock |
| situs | floor space, coil handling |
| Persediaan listrik | tegangan, fasa, dan frekuensi di lokasi |
Operasi dan keamanan
Close the guard before starting and keep clear of the rotating arm during the wrap. Stop the machine before opening the guard or adjusting the band path.
Routine checks cover the band reel, the wrapping arm and the platform bearings, per the machine manual. Confirm the coil is seated before each cycle starts.
Pertanyaan yang Sering Diajukan (FAQ) tentang Teknik
Q: What does this machine do? A: It wraps a metal coil by turning it on the platform while a wrapping arm feeds the band over it.
Q: How is the band applied? A: The arm orbits around the coil and the platform turns the coil, so the band covers the surface through each pass.
Q: Do we set the number of wraps? A: Yes, the wrap count is set on the control panel, and the machine stops when the cycle is complete.
Q: Can it handle different coil sizes? A: Yes, coil diameter and width are matched through the per-project confirmation so the platform and arm fit your range.
Q: What does it suit? A: It suits metal coils of strip, cable or wire that need a tight band when they are stored, transported or dispatched.
Langkah selanjutnya
- Kirimkan email kepada kami di info@fhopepack.com dengan mencantumkan diameter dan lebar kumparan Anda.
- Kami akan mengirimkan proposal pembungkus horizontal dalam waktu 48 jam.
- We confirm the wrap settings and platform size for your coils.
Bacaan terkait
- cara mengemas coil secara horizontal dengan mesin
- Mesin Pengikat Silang Batangan Aluminium Otomatis Tingkat Lanjut
- Mesin Pelepas Tali Pengikat Kumparan
- Penyegelan Samping dan Pembungkus Susut: Operasi dan Aplikasinya
- Coil Lifter & Roller Alat Pengangkat Dan Pembubutan
- Lini produk mesin pengemas FHOPE
Sumber dan standar
- ISO 12100:2010 Keselamatan mesin, prinsip umum untuk desain dan penilaian risiko
- EN 415-10:2014 Keselamatan mesin pengemas, persyaratan umum
- EN ISO 13849-1:2023 Keselamatan mesin, bagian-bagian terkait keselamatan dari sistem kendali
FHOPE horizontal coil wrapping machine demonstration video. Reviewed as a general demonstration; coil size, band width and wrap settings confirmed per project.
Terakhir ditinjau: 12-10-2026
