Mesin Pembungkus Peregangan Horizontal Besar untuk dijual

Ringkasan Eksekutif

A big horizontal stretch wrapping machine wraps long, heavy loads such as pipe bundles, profiles and panels as they pass through a rotating ring. Our E1000 has a ring of 1,000 mm inner diameter, a ring speed of about 10–60 r/min and conveyors running at 3–12 m/min, with overlap set from 10% to 90%. For a 6 m bundle of 600 × 600 mm we pair it with 6 m powered roller conveyors on each side.

A square bundle of blue plastic pipes runs on the conveyor through the ring of the wrapping station, inside a yellow mesh guard. The film goes on in a spiral, and the bundle leaves fully closed, pipe ends included.

Daftar Isi

What a big horizontal wrapper does

Long loads cannot stand on a turntable. In a horizontal wrapper the load lies on a conveyor and moves through a ring, and the ring carries the film roll around it. The conveyor speed and the ring speed together set how far the load moves on each ring turn, and so the overlap of the film spiral. The result is a closed, tight wrap that holds the bundle together and keeps dust and water out.

Menyesuaikan ukuran cincin dengan bundel

The ring inner diameter limits the bundle cross-section. A rectangular bundle turns inside the ring by its diagonal, so the check is the diagonal, not the width:

Diagonal = √(W² + H²), which must be smaller than the ring inner diameter with working clearance for the film carriage. The radial margin is (ring ID − diagonal) ÷ 2; the clearance your film carriage needs is confirmed at quote.

Bundle (W × H) Diagonal Fits a 1,000 mm ring?
600 × 600 mm tentang 849 mm iya nih
700 × 600 mm tentang 922 mm only about 39 mm radial margin; a larger ring is the safer choice
800 × 700 mm tentang 1,063 mm no; larger ring

Wrapping station and conveyors

  • Cincin. Reinforced aluminium ring up to 60 mm wide on a strong frame, driven by a geared motor. Ring and driving wheels can be changed easily.
  • Ring control. Speed set by inverter, soft start and stop, ring jog, and automatic return to the start position.
  • Pembawa film. Motor tension control for a tight wrap; tension adjusts to the package size.
  • Konveyor. Driven by geared motors with inverter speed control. The conveyor structure protects the product surface.
  • Kontrol. PLC and touch screen. Ring speed, roller speed, package size and the wrap program are set on the screen. A photocell sets the wrapping start position, and extra wraps at the head and the end are set on the screen.
  • Menjaga. A protection shield covers the moving parts.

Specifications (E1000)

Barang Angka
Ring inner diameter 1,000 mm
Kecepatan dering sekitar 10–60 r/min
Kecepatan konveyor 3–12 m/mnt
Tumpang tindih 10% –90%
Gulungan film 100–500 mm wide, 100–250 mm OD
Pasokan udara 5–8 kgf/cm² (sekitar 0.5–0.8 MPa)
ukuran mesin sekitar 4,800 × 1,800 × 2,000 mm
Daya sekitar 4.5 kW, AC 380 V, 50 Hz, 3 fase
Conveyors for 6 m bundles 6 m powered infeed and 6 m powered outfeed

Worked example: 6 m pipe bundle

Take a bundle of 600 × 600 × 6,000 mm wrapped with 250 mm film at 50% overlap and a ring speed of 40 r/min.

Langkah Perhitungan Hasil
Pemeriksaan dering √(600² + 600²) 849 mm, di bawah 1,000 mm
Maju per putaran cincin 250 × (1 − 50%) 125 mm
Kecepatan konveyor 125 mm × 40 r/min 5 m/min, within 3–12 m/min
Ring turns over the length 6,000 125 48
Film on the bundle 48 × 2.4 m perimeter tentang 115 m
Waktu pembungkus 6 m ÷ 5 m/menit sekitar 1.2 menit, 72 detik

Hasil. About 72 s and 115 m of film per bundle in one spiral layer, plus the extra head and end wraps. Raising the ring speed to 60 r/min gives 7.5 m/min and about 48 s per bundle.

Daftar periksa pemilihan

  1. Lebar, tinggi, panjang, dan berat bundel.
  2. Bundle diagonal against the ring size.
  3. Jenis dan lebar film.
  4. Bundel per jam.
  5. Conveyor length in and out, and the line before and after.

Keamanan: EN 415-10 dan ISO 12100

Horizontal stretch wrappers are packaging machines other than pallet wrappers, so they are covered by EN 415-10, with the risk assessment to ISO 12100:2010. The turning ring and the conveyor nips are the main hazards. The station is guarded or closed by a light curtain, and a protection shield covers the moving parts. Guarding and CE documents are agreed per project.

Pertanyaan yang Sering Diajukan (FAQ) tentang Teknik

Q: How big a bundle fits the E1000? A: The bundle diagonal must be under the 1,000 mm ring inner diameter, with working clearance. Larger rings are built to order.

Q: How is the overlap set? A: From 10% to 90% on the touch screen. The PLC matches conveyor speed to ring speed.

Q: Can the ends be reinforced? A: Yes. Extra wraps at the head and end of the bundle are set on the screen.

Q: What power does it need? A: About 4.5 kW at 380 V, 50 Hz, three phase, plus compressed air.

Langkah selanjutnya

  1. Send your bundle size, length and weight Kirimkan ke info@fhopepack.com.
  2. Kami mengukur the ring and conveyors.
  3. Kami membalas dalam waktu 24 jam dengan proposal dan penawaran harga.

sumber

  • Halaman produk FHOPE: Mesin pembungkus peregangan horizontal E1000
  • FHOPE technical proposal for an E-1000 line for 6 m bundles
  • EN 415-10; ISO 12100:2010
  • Our big horizontal stretch wrapper shown above

Terakhir ditinjau: 19-10-2026

Pos terkait

Pesan Panggilan
Pesan Panggilan