Mesin pelabelan, penyegelan, dan penyusutan otomatis online

Ringkasan Eksekutif

An online labeling, sealing and shrinking machine labels each product, seals it in shrink film and shrinks the film tight, all in the production line with no one handling the product. It suits rolls, boxes and packs that need a label and a clean, dust-proof wrap. Our equivalent solution combines a labeler with a motion sealer and shrink tunnel. This page explains the order of the stations, how to check that a product fits, and how to work out film use.

White paper or nonwoven rolls with a center hole move along a roller conveyor. Pneumatic grippers and guide plates square each roll, then clear film is fed around it and sealed. The roll passes under a red heating hood where the film shrinks tight, and orange mesh fencing closes off the seal and shrink area. A barcode label sits on each product.

Daftar Isi

Why label and shrink in line

Done offline, labeling and wrapping need people to pick, stack and re-feed every product. In line, each product is labeled and wrapped as it leaves production. Labels match the product, nothing piles up, and the wrap keeps dust off rolls of tissue, nonwoven or film from the first minute.

Stasiun-stasiun tersebut secara berurutan.

  1. Infeed and positioning: guides and grippers align and center the product on the conveyor.
  2. Pelabelan: a labeler applies the barcode or product label at a set position.
  3. Penyegelan: a motion sealer wraps center-folded film around the product and seals and cuts it while it moves.
  4. Penyusutan: a hot-air tunnel shrinks the film tight.
  5. Cooling and outfeed: the pack cools on the conveyor before stacking or boxing.

Film length is set by an electric eye and timer, so each pack gets the same amount of film.

Label under or over the film

Posisi label Baik untuk Hati hati terhadap
Di bawah film protects the label from scuffs and moisture scanner must read through film; avoid glare
Over the film easy scanning, no film glare label must stick to shrink film; apply after cooling

For rolls that go to retail, under the film keeps the label clean. For logistics labels scanned many times, over the film is easier.

Angka referensi

For our equivalent motion sealer and tunnel:

Barang MO-350 MO-600
Lebar penyegelan hingga mm 350 hingga mm 600
Penyegelan tinggi hingga mm 200 hingga mm 250
Film Max Lebar 580 mm, diameter luar 280 mm Lebar 860 mm, diameter luar 280 mm
Daya 10.5 kW 12.5 kW
Udara hingga 0.5 MPa hingga 0.5 MPa
Berat 600 kg 900 kg

Both run on 380 V 50–60 Hz 3 phase at a working height of 780–820 mm. Film is center-folded POF or PE, and the tunnel conveyor uses chains with rotating silicone-coated rods. On the MO-350, product width plus height must be 400 mm or less. Labeler type and line speed are confirmed at quote.

Will my product fit?

Check three things: width against sealing width, height against sealing height, and width plus height against the product limit. A roll of 250 mm diameter and 150 mm high, lying flat (example only):

Memeriksa Nilai MO-350 limit Hasil
Lebar 250 mm 350 mm cocok
Tinggi 150 mm 200 mm cocok
Lebar + tinggi 250 + 150 = 400 mm 400 mm di batas

A product right at the limit fits but leaves no margin. A larger roll goes to the MO-600.

Film use per pack

Center-folded film width ≈ product width + height + allowance. Film length per pack ≈ product length + height + allowance. With a 50 mm allowance for the example roll: film width 250 + 150 + 50 = 450 mm, inside the 580 mm limit, and film length 250 + 150 + 50 = 450 mm per pack. Multiply by packs per year and film weight per meter for your film budget.

Daftar periksa pemilihan

  1. Product sizes, and the largest one?
  2. Packs per minute from your line?
  3. Label size, content and position?
  4. Under or over the film?
  5. Jenis dan ketebalan film?
  6. What happens after the tunnel?

Safety/keselamatan

The machine is designed to EN ISO 12100:2010 for risk assessment, EN 415-10 for packaging machine safety and EN 60204-1 for electrical equipment. The hot tunnel and the seal knife are the main hazards; high-temperature warnings and mesh fencing close off the area.

Pertanyaan yang Sering Diajukan (FAQ) tentang Teknik

Q: Can it label and wrap rolls with a center hole? A: Yes; the film seals around the roll and shrinks over the ends.

Q: Which film does it use? A: Center-folded POF or PE film.

Q: How do I know my product fits? A: Check width, height and width plus height against the model limits.

Q: Can the label go on after shrinking? A: Yes, the labeler can sit after the tunnel once the film has cooled.

Langkah selanjutnya

  1. Send your product sizes, packs per minute and label sample Kirimkan ke info@fhopepack.com.
  2. Kami mengukur the labeler, sealer and tunnel.
  3. Kami membalas dalam waktu 24 jam dengan proposal dan penawaran harga.

sumber

  • FHOPE product pages: motion sealer shrinking machines MO-350 and MO-600
  • EN ISO 12100:2010; EN 415-10; EN 60204-1
  • The roll labeling and shrink wrapping line shown above

Terakhir ditinjau: 19-10-2026

Pos terkait

Pesan Panggilan
Pesan Panggilan