առցանց պալետափոխանակիչ, ծղոտե ներքնակ փոխող մեքենա

The pushing type transfers the load horizontally by sliding it onto a new pallet. This online pallet exchanger clamps the whole load and rotates it 180°, performing a non-push transfer. It suits loads that hold together when inverted but should not be dragged sideways.

V-shape machines use a controlled 90° side tilt to change the bottom pallet. This machine uses a full 180° rotation. If your load tolerates inversion better than a side lean, the 180° method is usually the gentler option; if it cannot be inverted at all, the V-shape or 95° exchanger is the better fit.

After the 180° rotation, the old pallet ends up on top of the load and is removed either manually or automatically, depending on the machine configuration you select.

Turnover time is approximately 50 seconds per cycle in the representative configuration. Actual line throughput depends on conveyor speeds and removal method, so total capacity is confirmed per project.

The representative configuration covers H1200–1800 mm. Taller or non-standard loads require an engineered machine — submit your load profile for evaluation.

Loads that are not mechanically self-supporting in the inverted state are not good candidates — for example, open containers, unsealed liquid drums without sealed heads, loose granular materials, and unsecured loose top layers. For those, evaluate the pushing-type pallet changer, the V-shape pallet changer, or the 95° exchanger instead.

Via wireless remote control as standard, with the load secured by hydraulic or pneumatic pressing before rotation.

A 12-month standard warranty applies; promotional 24-month coverage is available on selected models only.