Steel Sheet Flipper: Turning Plates Without a Crane

Name: Acéllemez-forgató daruval történő forgatás helyett: Lemez 180 fokos elforgatása két hidraulikus levél között
Uploaded: 2026-09-22T10:34:02+00:00
Duration: 1 min 46 s
Description: > **Executive summary** > This clip shows a two-leaf sheet flipper in a fabrication shop. The operator places a steel plate on one leaf, both leaves rise to vertical so the plate passes from one leaf to the other, and the second leaf lowers it with the other face up.…

Vezetői összefoglaló This clip shows a two-leaf sheet flipper in a fabrication shop. The operator places a steel plate on one leaf, both leaves rise to vertical so the plate passes from one leaf to the other, and the second leaf lowers it with the other face up. No crane, chains or hooks touch the plate. The footage was shared with us; our equivalent solution turns sheets and plates the same way, with the leaves sized to your largest sheet.

Amit a klip mutat

Lépés	Amit látsz
Rakodás	An operator places a steel plate on the left leaf of the flipper
Emelő	Both leaves rise towards vertical on their hydraulic arms
Átruházás	At vertical the plate leans from the first leaf onto the second
leeresztés	The second leaf lowers the plate, now with its other face up
vissza	The plate is unloaded, then the leaves return to the loading position

What crane flipping costs

Crane time. Each crane flip ties up the crane and a slinger for several minutes.
Kockázat. A plate turned on chains can swing or drop as it passes its balance point.
Marks. Hooks and chains can scratch or bend sheet edges.
Várakozás. Other jobs wait while the crane flips plates.

A flipper keeps the plate supported on a leaf the whole time, so the turn is controlled.

Time per flip

Működő példa (szemléltető).

Tétel	Érték:
Crane flip with slinger (illustrative)	6 min
Flipper cycle (illustrative)	1 min
Time saved per flip, 6 − 1	5 min
Flips per shift (illustrative)	24
Crane time freed per shift, 24 × 5	120 min, 2 hours

What we set per shop

Beállítás	Attól függ
Levélméret	Legnagyobb lemezhossz és -szélesség
Kapacitás	Heaviest sheet or plate
Leaf surface	Plain steel, or pads for finished sheet
Vezérlés	Hold-to-run or two-hand control at the operator station

Kiválasztási ellenőrzőlista

Legnagyobb és legkisebb lapméret.
Sheet or plate weight.
Surfaces that must not be marked.
Flips per shift.
Floor space and loading side.
Daruval vagy targoncával történő rakodás.

Biztonság

Keep clear of the leaves while they move; use the two-hand or hold-to-run control.
Never stand between the leaves.
Lock out the hydraulic unit before maintenance.
A CE piacokra a gépet az ISO 12100 és az EN 415-10 szabvány szerint tervezték.

Mérnöki GYIK

Q: What does a sheet flipper do? A: It turns a sheet or plate face-down between two hydraulic leaves, without a crane.

Q: Why not flip with the crane? A: Crane flipping ties up the crane and a slinger, and the plate can swing as it passes its balance point.

Q: How much time does it save? A: About 5 minutes per flip in the worked example, or 2 hours of crane time per shift at 24 flips.

Q: Will it mark finished sheet? A: We fit pads to the leaves where the surface must stay clean.

Q: Can you build this configuration? A: Yes. We build equivalent sheet flippers sized to your sheets and shop layout.

K: Mely szabványok vonatkoznak rájuk? V: CE-jelölésű piacokra az ISO 12100 és az EN 415-10.

Következő lépés

We match a sheet flipper in three steps:

Küldje el az elrendezési rajzát with sheet sizes, weights and flips per shift, to info@fhopepack.com.
Ajánlatkérés 48 órán belül a gépadatokkal és az elrendezéssel.
Helyszíni felmérés foglalása so we confirm the loading side and floor space.