Vezetői összefoglaló: This page is for anyone wrapping palletised loads and deciding how a turntable wrapper with automatic film cutting should fit their line. It explains what the pallet wrapping machine shown in the video does, how a turntable rotates a load while a film carriage moves up a column to wrap it, and what to verify with a supplier before you commit. The video below shows the wrapping motion end to end, and the photos on this page are product-library reference images, not stills from the clip.
Ezen az oldalon: Amiben ez az oldal segít a döntésben · What a turntable pallet wrapping machine does · How a load is wrapped · Amit vásárlás előtt ellenőrizni kell · Amit a videó mutat · Vevő ellenőrzőlistája · FAQ · Kapcsolódó olvasmány · Következő lépés
Amiben ez az oldal segít a döntésben
Hand wrapping pallets is slow and inconsistent, and the film-cutting step is where a quick job turns untidy. A turntable wrapper rotates the load while a film carriage wraps it, and in a machine with automatic film cutting the film is secured and cut without an operator. The video below shows the wrapping motion end to end.
This page turns that machine into questions you can ask a supplier: what loads it wraps, how the film is cut, and what controls come with it. The checklist at the bottom gives you a single request you can send as it stands.
What a turntable pallet wrapping machine does
A turntable pallet wrapping machine wraps palletised loads automatically. The load sits on a rotating platform while a film carriage moves up and down a column, laying clear stretch film around the load in overlapping layers. The wrapping runs continuously with no operator holding the film.
In the video the machine has a white metal frame, a yellow circular rotating platform and a vertical white column. A film carriage with the film roll mounted on it rides the column, with a control panel on the side of the column.
How a load is wrapped
The turntable, the column and the film carriage work together.
- Betöltés. The workpiece is already positioned on the turntable when the video begins.
- Forog. The turntable spins at a steady speed, carrying the load past the film.
- Betakar. The film carriage travels up and down the column, laying film in overlapping layers around the load.
- Befejezés. The load becomes progressively covered until the wrapping is nearly complete.
The video ends before the film is secured and cut, so the automatic cutting step itself is not demonstrated on camera.
Amit vásárlás előtt ellenőrizni kell
The video shows the wrapping motion, but the cutting step named in the title is not visible, and nothing on screen states capacity, size or cycle time. Those figures must come from the supplier in writing. Start with six facts:
- Boríték betöltése — minimum and maximum load height, width, depth and weight.
- Turntable and capacity — turntable diameter, load capacity and rotation speed.
- Filmvágás — how the film is cut, tail handled and clamped, since the video does not show it.
- Körbefuttatási minta — number of layers, overlap and carriage settings.
- Ciklusidő — a complete wrap from start to cut.
- Biztonsági csomag — őrzés, vészleállítás és tanúsítványok.
Minden egyes tétel megváltoztatja a vásárlási döntést. Az alábbi ellenőrzőlista egyetlen kérésként sorolja fel őket, amelyet jelenlegi állapotukban elküldhet.
Amit a videó mutat
What the video shows is one nearly complete wrapping cycle. A large rectangular load sits on the yellow turntable, and the turntable rotates steadily while the vertical film carriage moves up and down the white column. The carriage winds clear stretch film around the load in a continuous cycle with no visible pauses.
The load becomes progressively more covered, and the control panel’s digital display reads 0.0 throughout the closing seconds. The film layer sits tight against the surface with visible stretch and reflections, and the load stays fixed in orientation with no tilting or flipping.
What the video does not show is just as important. It does not show the film being cut, even though the product title describes automatic film cutting. It does not show how the film tail is handled or clamped after the cut. It does not show model, rated capacity, maximum load size, turntable diameter, cycle time, power or certifications, and it does not show how loads are fed in and discharged.
Direct observation notes from the sampled frames follow one rule: only what is visible is stated, and nothing is guessed from audio, because the clip has background music and no narration. The machine has a white metal frame, a yellow circular rotating platform, a vertical white column, and a film carriage that moves up and down the column with the film roll mounted on it.
The control panel sits on the side of the column at mid-to-upper height, with a blue rectangular digital display showing 0.0 and several blue and red buttons below it whose functions are not legible. The product is a tall, silver-grey rectangular box-like load, wrapped entirely in clear transparent film, that stays upright and fixed in orientation. Another wrapping machine appears in the background. The photos on this page are product-library reference images from the manufacturer, not stills from the clip.
Vevő ellenőrzőlistája
| Kérdezze meg a szállítót | Miért dönt a vásárlásról |
|---|---|
| Min/max load height, width, depth, weight | Vajon a lemezjátszó elbírja-e a terheket? |
| Turntable diameter and capacity | No figure appears in the video |
| Film cut, tail, clamp method | The cut is not shown despite the title |
| Wrap layers and settings | A minta nincs megadva |
| Teljes ciklusidő | One minute of footage is not a rating |
| Biztonság: őrzés, vészleállító rendszer, tanúsítványok | A felvételen nem látszanak biztonsági elemek |
Küldje el a szállítónak: Please confirm for the pallet wrapping machine with automatic film cutting shown in the demonstration video: (1) the minimum and maximum load height, width, depth and weight; (2) the turntable diameter, load capacity and rotation speed; (3) how the film is cut, the tail handled and clamped; (4) the number of layers, overlap and carriage settings; (5) a complete cycle time from start to cut; (6) fitted safety devices including guarding, emergency stop and certifications.
FAQ
Does the video show the film being cut? No. The footage ends as the load is nearly wrapped, and the cutting, tail handling and clamping shown by the product name are not visible. Confirm them with the supplier.
What does the video show on the panel? A blue rectangular digital display reads 0.0, with blue and red buttons below it. Their functions are not legible.
How does the load stay stable? The load keeps its fixed orientation on the rotating turntable throughout, with no tilting or flipping.
Kapcsolódó olvasmány
- Raklapcsomagoló gép automatikus fóliavágással
- Automatikus raklapcsomagoló gép
- Félautomata raklapcsomagoló gép
- Forgógyűrűs nyújtócsomagoló
- Raklap inverter
- Stretch csomagológép
Következő lépés
Send the supplier your load sizes, turntable and film requirements, and ask for the six verification figures from the checklist above.
Then confirm the film-cutting step, since the video does not show the cut even though the title names it.
Then ask about the controls and safety package, because the footage shows the panel but no readable functions or safety devices. Use the Elérhetőség oldalon hogy elkezdődjön az a csere.
Utolsó felülvizsgálat: 2026-09-29
Közzétéve: 2026-09-29
