स्वचालित पाइप कॉइलर और नली कोइलिंग मशीन

कार्यकारी सारांश

Hose and small pipe come off the line in length, and coiling them by hand takes the seat of the crew and leaves each coil to the pull of the hand. This automatic pipe coiler and hose coiling machine coils the hose and straps each coil, running the gather, coil and strap steps on the machine. We build automatic coiling and strapping machines. Hose range and coil plan are confirmed per project.

विषय - सूची

Why hand coiling costs the line

Hose and small pipe exit the line at the pace of production, and hand coiling ties each length to the arms of the operator. Every coil pulled by hand varies, and the step slows the end of the line. Machine coiling is what keeps the coil even while the line keeps moving. The hose range and its pace are confirmed per project.

मशीन क्या करती है?

The machine takes hose from the line, winds it into a coil and straps the coil, completing the coiling step without a hand gathering the length. Each coil is wound with a controlled start and finish, then closed with a strap. Because the machine runs gather, coil and strap together, the end of the line clears. The covered step is confirmed per project.

Coiling the hose

The hose is wound onto the coil in even turns, with the machine controlling the lay of each ring from the first turn to the last. Controlled coiling is what keeps the coil tight and its sides clean, so the coil handles without a loose tail. The coil diameter and lay are set on the machine, confirmed per project.

Strapping each coil

After coiling, the machine straps the coil, applying the strap around the wound hose to hold the coil together. A strapped coil keeps its shape through handling and the next moves. The strap positions and tension follow the hose and coil, confirmed per project. Closing each coil as it comes off keeps the coil secure end to end.

From line to coil

The machine sits at the end of the line, taking the hose as it runs and finishing each coil before it moves on. Line-to-coil flow removes the off-line step where coils used to be made by hand. The coil is ready at the point the hose stops. The line interface is confirmed per project.

Coils that leave ready

What leaves the machine is a coiled and strapped unit, ready for the pallet or the shelf without a further hand step. A ready coil is what the distribution side expects from the line. The machine closes the step so coils stay as produced. The coil standard is confirmed per project.

विशिष्ट विन्यास

नीचे दिए गए आंकड़े संख्यात्मक मानों के बजाय कार्यात्मक डिजाइन सीमाओं को सूचीबद्ध करते हैं, और प्रत्येक परियोजना के अनुसार इनकी पुष्टि की जाती है।

प्राचल परियोजना के अनुसार पुष्टि की गई सामान्य सीमा
नली small pipe range
कुंडल diameter set
समापन even lay
पट्टियाँ स्थितियाँ, तनाव
फ्लो line-to-coil
विद्युत आपूर्ति 380 वोल्ट तीन फेज 50 हर्ट्ज, या हल्की मशीनों के लिए 220 वोल्ट सिंगल फेज, परियोजना के अनुसार चयन किया जाता है।

वीडियो में क्या दिखाया गया है

Our footage shows an automatic pipe coiler and hose coiling machine winding and strapping hose. It is a general demonstration, so your hose range and coil plan are confirmed with us per project.

चयन चेकलिस्ट

सवाल प्रत्येक परियोजना के लिए पुष्टि करें
नली diameters, coil
कुंडल diameter set
समापन lay plan
पट्टियाँ count, tension
फ्लो लाइन फिट
विद्युत आपूर्ति साइट पर वोल्टेज, फेज और फ्रीक्वेंसी

संचालन और सुरक्षा

Run the cycle from the panel and the machine coils and straps each hose automatically. Keep clear of the winding head, hose path, strap head and outfeed while the machine runs, with guarding and emergency stops at the operator position. Routine checks cover the winding drive, guides, strap unit, sensors and control, per the machine manual. Confirm the coil settings against the hose before each run so coils stay tight.

इंजीनियरिंग से संबंधित अक्सर पूछे जाने वाले प्रश्न

Q: What does this machine do? A: It takes hose from the line, winds it into a coil and straps the coil.

Q: How is the coil wound? A: The machine lays each turn in order from the first ring to the last, closing the coil tight.

Q: What holds the coil closed? A: A strap applied around the wound hose after the coil is complete.

Q: Where does it run? A: At the end of the line, where the hose stops and the coil begins.

Q: What leaves the machine? A: A coiled and strapped unit ready for the pallet or the shelf.

अगला कदम

  1. Email us at info@fhopepack.com with your hose range and line pace.
  2. हम 48 घंटों के भीतर कॉइलिंग का प्रस्ताव और लेआउट ड्राइंग भेज देते हैं।
  3. We arrange a site survey to confirm hose range and line position.

संबंधित पढ़ने

स्रोत और मानक

FHOPE automatic pipe coiler and hose coiling machine demonstration video. Reviewed as a general demonstration; hose range confirmed per project.

अंतिम समीक्षा तिथि: 2026-10-10

संबंधित पोस्ट

बुक ए कॉल
बुक ए कॉल