دستگاه بسته بندی و تسمه کش چوبی

خلاصه اجرایی This 4-minute clip follows a timber wrapping and strapping line for wooden board products. A red arc-shaped wrap arm descends over a stationary stack of boards and rotates around it, applying transparent stretch film in multiple spiral layers. The wrapped package is conveyed onward, the film is later removed, an overhead press beam settles the stack, panels are cut into long strips, and a green strapping band holds the bundle. Rated capacity, model, cycle time, and most certifications are not visible in the footage and must be confirmed with the manufacturer.

خط در یک نگاه

This is not a single machine but a wrapping-and-strapping line for wooden boards and panels laid out in a straight flow: the board stack is wrapped, conveyed, pressed, cut, and strapped along one direction. The clip is edited between stations, so it reads as a sequence of operations rather than one uninterrupted cycle.

The clip shows these main stations:

• Stretch film wrapper: a yellow/beige metal frame with a red arc-shaped wrap arm; the arm lowers over the static board stack and rotates around it, drawing clear film from a spool below.
• نوار نقاله غلتکی: red rollers and metal supports that carry the wrapped package through the line.
• Press/frame section: a red upper arm with pneumatic elements and a frame clamp; it moves along a track, lowers onto the board stack, and presses it into position.
• Cutting/sort section: a white belt conveyor with yellow guards, where panels are split into long strips; a worker watches at the end of the belt.
• Strapping section: an upper beam with strapping and clamping hardware; a green strapping band with a clamp is visible holding the bundle.

Parts are finished in yellow/beige, red, and silver across the different stations.

چیزی که ویدیو نشان می دهد

The footage advances through the line in edited scenes rather than one live pass.

یادداشت‌های مشاهده مستقیم

• ساختار ماشین: yellow/beige welded frames for the wrapper frame, red rollers and supports on the conveyor, and silver metal parts on the arm, clamps, and rails.
• Wrapper behavior: the arc arm lowers over the workpiece and orbits it while the workpiece stays still; the film unwinds from a lower spool and the wrap finishes at the top with the film end cut off.
• قطعه کار: a long, flat, light-colored board — plywood/panel-board type with wood grain — first wrapped as one piece, later a stack of boards, then split into long strips. It stays horizontal throughout and moves with the conveyors; it does not rotate during wrapping.
• تسمه بندی: a green strapping band is fixed across the side of the bundle with a metal clamp in the final shot.
• متن مورد نظر: the strap clamp carries the letters “CE”; a neighboring mark reads like “LWE” but is not clear enough to state with confidence.

What this line does

A line like this handles the packaging steps that otherwise slow down a woodworking shop: it wraps stacks of boards in stretch film so they stay clean and together, presses and settles the stack so it is square for further handling, and finishes with a straps that hold the bundle through storage and transport. Where cutting and sorting are part of the same flow, the boards leave ready for batch dispatch rather than as loose stack. Every step is automated, so one or two people run the line instead of wrapping boards by hand.

نکات کنترلی و ایمنی

• The wrapper carries a yellow control box with a green indicator lamp; the other stations do not show a complete control panel in the footage.
• No emergency-stop button, light curtain, interlock, or full safety fence is visible in the clip.
• A yellow warning label on the wrapper column is present but not readable; yellow warning blocks on the end columns look like protective elements.

Moving parts here — the rotating wrap arm, the lowering press beam, and the cutting section — call for clearance while running. Confirm the guarding and safety options with the manufacturer.

آنچه ویدیو نشان نمی‌دهد

• Model name and brand of each station.
• Rated capacity: maximum board dimensions, stack weight, and line speed.
• A complete cycle time for one board stack from wrap to strapping.
• Power and air supply requirements.
• Handling details: lubrication, maintenance intervals, and alarms.
• Exact bundle dimensions and strapping tension or compression values.
• Certifications beyond the “CE” mark seen on the strap clamp.
• Automatic feed and discharge beyond what is shown.

هیچ یک از این جزئیات در ویدیو نشان داده نشده است؛ همه آنها باید با سازنده تأیید شوند.

Is this line right for your timber products?

چه مواردی را باید با سازنده بررسی کرد

1. Confirm the maximum board and stack size and weight the line accepts.
2. Confirm the line speed and a realistic cycle time for your board stacks.
3. Confirm the wrapping settings: number of spiral layers, film type, and film width.
4. Confirm how the strapping station works — band type, tension, and clamp style.
5. Confirm whether the cutting/sorting section is included or optional, and check power, air supply, and safety certification requirements.

سوالات متداول

Is this a baler for steel coils or cotton? No. Everything in the footage is about wooden boards and panels — wrapping, pressing, cutting, and strapping. There is no baler, no compressed bale, and no coil or cotton shown.

Do the boards rotate during wrapping? No. The board stack stays still while the red arc arm lowers and rotates around it, applying film in spiral layers.

Does the line strap as well as wrap? Yes. The final shot shows a green strapping band clamped across the bundle, so strapping is part of what this line does. Confirm the strapping configuration with the supplier.

Does the line cut boards? A section of the footage shows panels being split into long strips on a white belt conveyor. Whether that cutting station ships as part of this line depends on the configuration — confirm with the manufacturer.

What does “CE” on the clamp mean? The clip shows a “CE” mark on the strap clamp. A neighboring mark looked like “LWE” but was not clear enough to state. Confirm the certification documents and marks with the supplier.

منبع و روش

مشاهدات این مقاله از ویدیوی یوتیوب بالا گرفته شده است (شناسه ویدیو) md6xLoOFcik). Frames were extracted from the footage and analyzed with a local vision-language model at roughly 4-second intervals over about 4 minutes; conflicting readings of the workpiece were resolved with a focused recheck of all frames. The video has background music and no narration to transcribe. Facts that cannot be read in the footage — rated capacity, model, cycle time, certifications — are marked as unconfirmed rather than filled in. Notes about typical use are derived from the observed line and labeled as inference.

Why wrapping and strapping matter

Wooden boards and panels are bulky, easy to scuff, and quick to pick up dust and transit damage when left loose. Wrapping a stack in stretch film keeps the boards together and clean, while a strap holds the bundle steady through storage and shipping. Automating these steps with a line like the one in the video means each stack is handled the same way every time, with far less manual labor than hand wrapping and hand strapping.

خواندن مرتبط

• دستگاه بسته بندی افقی اتوماتیک و دستگاه بسته بندی مداری
• لفاف کش افقی برای محصولات سبک کاغذی
• دستگاه بسته بندی کششی حلقه ای افقی مداری
• دستگاه استرچ رپ افقی مداری برای موتور و سینی
• لفاف کششی مداری افقی برای تسمه و بسته بندی پالت

مرحله بعدی

If you wrap, strap, or cut wooden boards and panels by hand, the line in this video shows how the steps can run together automatically. Confirm the maximum board and stack size, line speed, wrapping and strapping options, and safety configuration with FHOPE before ordering. For contact details, visit تماس با ما, or use the form on the website to request specifications for your timber products.

آخرین به‌روزرسانی: 2026-08-31.