دستگاه بسته بندی پالت و ترازو

خلاصه اجرایی Weighing and wrapping at one station saves a forklift move and eliminates a second floor position. The turntable pallet wrapper applies stretch film around a palletized load while an integrated digital weighing display on the column indicates load weight. Net cargo weight is determined from the خواندن ناخالص minus the pallet tare and film weight. The integrated digital scale is configured to match application load requirements, verifying shipment weight to help prevent freight billing discrepancies [manufacturer rating].

فهرست مندرجات

• Machine Layout and Weighing Display
• How Weighing and Wrapping Work Together
• Net Weight from the Gross Reading
• Stretch Film Laid per Load
• کنترل‌ها و ایمنی
• Selection Checklist for a Pallet Wrapper with Scale
• سوالات متداول مهندسی
• گام بعدی
• خواندن مرتبط
• منابع

Machine Layout and Weighing Display

The machine layout integrates a motorized structural turntable with an upright mast column. The palletized load is loaded directly onto the turntable surface by forklift or pallet jack. During the wrapping cycle, the carriage travels vertically along the mast while the turntable rotates, applying clear stretch film around the unitized cargo in an overlapping spiral pattern.

An industrial digital weight indicator is mounted directly on the mast column, providing an immediate gross reading of the pallet load. Once the preset wrapping pattern is complete, the carriage returns to its base home position and the film is severed. The automated operating cycle executes without requiring direct operator intervention during rotation.

How Weighing and Wrapping Work Together

Integrating stretch wrapping and load-cell weighing into a single machine streamlines warehouse packaging operations, saves cycle time, and confirms correct shipping weight to help reduce transport surcharges [manufacturer rating].

Executing both weighing and wrapping at one physical station means each load is handled once instead of twice.

Net Weight from the Gross Reading

Integrated scale systems verify certified shipping weights prior to truck staging. Net cargo weight is derived by deducting pallet tare and applied packaging film from the total gross measurement.

مثال توضیحی:

If gross weight is recorded on the turntable scale before initiating the wrapping cycle, the stretch film weight is excluded from the tare deduction.

Stretch Film Laid per Load

Film consumption per unit load depends on package dimensions, total turntable revolutions, and the pre-stretch elongation ratio set at the carriage rollers.

This represents the actual film perimeter laid on the load exterior; powered pre-stretch carriage systems dispense a shorter linear length from the supply roll to achieve this coverage.

کنترل‌ها و ایمنی

The turntable rotates heavy industrial loads while the film carriage traverses vertically along the mast. Operators must maintain clearance around the rotational perimeter while the equipment is energized and enter the wrapping zone only after the operating cycle has fully stopped. For turntable stretch wrappers, EN 415-6 establishes specific safety and guarding requirements.

Applicable compliance standards depend on the installation territory. For CE-regulated markets, ISO 12100 specifies mechanical risk-assessment procedures and EN 415-10 defines safety requirements for packaging machines.

Selection Checklist for a Pallet Wrapper with Scale

• سنگین‌ترین بار و اندازه پالت.
• محدوده توزین و عددی که نیاز دارید.
• چه وزن چاپ شود و چه به سیستم شما ارسال شود.
• ارتفاع بار و طرح فیلم.
• بار در ساعت.
• بارگیری با لیفتراک یا جک پالت.

سوالات متداول مهندسی

Q: Why weigh on the wrapper? A: Weighing and wrapping at one position handles each load once, eliminating redundant staging and extra forklift transport.

Q: How is net weight worked out? A: Gross minus pallet minus film: 1,025 − 25 − 0.6 kg gives 999.4 kg in our example.

Q: Should the load be weighed before or after wrapping? A: Either. After wrapping, subtract the film as in our example; before wrapping, leave it out.

س: یک بسته فیلم چقدر فیلم می‌گیرد؟ A: Turns × load perimeter: about 53 m laid for 12 turns on a 1,200 × 1,000 mm load in our example; pre-stretch means the roll pays out less.

Q: Which safety standard applies? A: For CE markets, EN 415-6 covers pallet wrapping machines.

گام بعدی

ما بسته بندی پالت شما را با مقیاس در سه مرحله برنامه ریزی می کنیم:

1. طرح چیدمان خود را ارسال کنید با اندازه بار، وزن و خروجی به info@fhopepack.com.
2. دریافت پیشنهاد ظرف ۴۸ ساعتبه همراه وزن و نقشه فیلم.
3. رزرو نظرسنجی در سایت برای بررسی روش بارگذاری و فضای کف.

خواندن مرتبط

• Semi-Auto Pallet Wrapping Machine Series — Overview of standard, scale-integrated, and low-profile turntable systems [manufacturer rating].
• Pallet Stretch Wrapping Machine with Scale A500 — Dedicated wrapping and weight verification station for shipping operations [manufacturer rating].
• دستگاه بسته بندی اتوماتیک پالت
• ویدئو: دستگاه بسته بندی پالت با برش خودکار فیلم
• ویدئو: دستگاه بسته بندی کششی پالت نیمه اتوماتیک A100

منابع

• محتوای دستگاه: تیم مهندسی FHOPE، 2026-10-04
• ایمنی بسته بندی پالت: EN 415-6
• نمونه‌های وزن و فیلم: نمونه‌های کار شده ما، مقادیر گویا
• دامنه استانداردها: ISO 12100: 2010, EN 415-10: 2014
• Technical configuration: Pallet Stretch Wrapping Machine with Scale A500

آخرین بررسی: 2026-10-04

آخرین به‌روزرسانی: 2026-10-29