خلاصه اجرایی: This page is for anyone packing wound cable or wire coils for delivery, or replacing a manual wrapping step. It explains what a cable coil packing machine does, why the static-coil design can be a good fit for delicate coils, and what to verify with a supplier before you commit. The video below shows one machine wrapping a black cable coil that stays still while the mechanism rotates around it, and the photos on this page are product-library reference images, not stills from the clip.
در این صفحه: این صفحه به شما در تصمیم‌گیری چه کمکی می‌کند؟ · What a cable coil packing machine does · The static-coil wrap · قبل از خرید چه مواردی را باید بررسی کنید · چیزی که ویدیو نشان می دهد · چک لیست تایید خریدار · سوالات متداول · خواندن مرتبط · مرحله بعدی
این صفحه به شما در تصمیم‌گیری چه کمکی می‌کند؟
A wound coil of cable or wire carries its value in the surface of the outer wraps. A loose edge, a scuffed outer layer or a coil that sheds wraps in transit turns a good delivery into a return. Cable coil packing machines put a protective film around the coil before it ships, and the machine in the video shows the whole cycle in under a minute.
This page turns that machine into questions you can ask a supplier: what coil sizes it accepts, how the film is applied and finished, what it can safely hold, and what safety devices it fits. The video below shows the mechanism; the checklist at the bottom gives you the figures to request in writing.
What a cable coil packing machine does
A cable coil packing machine applies stretch film around the outer surface of a wound coil to protect it during handling and transit. The machine holds the coil in place and moves a film applicator around or across it, laying a tight spiral of transparent film over the outer wraps.
In the video, the cycle is short and largely automatic. A black cable coil sits on the machine’s support columns, and the machine starts. An overhead arched arm moves down while transparent film is pulled from a top spindle, and the film spirals around the coil’s circumference. The film end is then pressed down to seal the wrap, and an operator makes a final check.
Because only the film moves, a coil does not have to be rotated or spun while it is wrapped. That matters for products that could be damaged or disturbed by rotation, such as large or loosely wound coils.
The figures below show the same coil-finishing context from other angles.
The static-coil wrap
Two coil-wrapping geometries are easy to confuse, and this video settles the question clearly.
- Static-coil type — the coil stays still on its support and the wrapping mechanism moves around it. This is what the video shows.
- Turntable type — the coil rotates on a platform while the film carriage stays beside it. Not shown in this clip.
For a cable or wire plant, the static-coil design has a practical benefit: the product does not spin, so heavy or fragile coils are not disturbed during wrapping. It also means the machine wraps the circumference and seals the end in one pass, without needing a rotating platform under the coil.
The honest caveat is the same as any short demo: the footage shows capability, not specification. Coil sizes, cycle time, film settings and safety details come from the manufacturer’s data sheet.
قبل از خرید چه مواردی را باید بررسی کنید
The video shows the mechanism, not the specification. Nothing on screen states coil size range, cycle time, film data or safety devices, so those figures come from the supplier in writing. Start with six facts:
- پوشش کویل — outer and inner diameter, width and weight range.
- تنظیم فیلم — film type, width and how many layers are applied.
- مدت چرخه — coils per hour at your coil dimensions.
- پایان فیلم — whether automatic film start, cut and end sealing are standard.
- میزان بارگذاری — the rated load capacity of the supports.
- ایمنی — emergency stop, guarding and certifications.
هر مورد، تصمیم خرید را تغییر می‌دهد. چک لیست زیر آنها را به عنوان یک درخواست واحد که می‌توانید به همین صورت ارسال کنید، مجدداً بیان می‌کند.
چیزی که ویدیو نشان می دهد
What the video shows is a blue static-coil cable and wire packing machine running a full cycle. A black coil of wound wire or cable sits on two white support columns in the centre of the machine, and it stays completely still.
The machine starts, and an overhead arched metal arm with yellow rollers moves down while transparent film is pulled from a top spindle. The film spirals around the coil’s outer surface. When the wrap is complete, the film end is pressed down to seal it, and an operator in blue workwear with white gloves makes a final check.
What the video does not show is just as important. It does not show coil size range, outer or inner diameter limits, width or weight, cycle time or throughput, the number of film layers, film type or width, model number, power or voltage. It does not show an emergency stop, guarding, light curtains or interlocks, and it does not show any certifications.
یادداشت‌های مشاهده مستقیم از فریم‌های نمونه‌برداری شده از یک قانون پیروی می‌کنند: فقط آنچه قابل مشاهده است بیان می‌شود و هیچ چیزی از صدا حدس زده نمی‌شود، زیرا کلیپ دارای موسیقی پس‌زمینه است و هیچ روایتی ندارد.
The machine has a blue-painted metal frame on a blue base, two white or off-white support columns, an arched arm with yellow rollers, and a top film spindle. A blue control box on the right carries a green start button, a red stop button and indicator lights that are not lit in the footage.
عکس‌های این صفحه، تصاویر مرجع از تولیدکننده در کتابخانه محصولات هستند، نه عکس‌های ثابت از کلیپ. واترمارک سایت که در فیلم دیده می‌شود، متعلق به ویدیو است و پلاک نام دستگاه نیست.
چک لیست تایید خریدار
| از تامین کننده بخواهید | چرا خرید را تعیین می‌کند |
|---|---|
| Coil outer/inner diameter, width, weight range | Whether the machine holds your coil mix |
| نوع فیلم، عرض و تعداد لایه‌ها | پوشش چیزی است که از کویل محافظت می‌کند |
| Cycle time and coils per hour | اینکه آیا با خط شما همگام است یا خیر |
| شروع، برش و آب‌بندی خودکار فیلم | مراحل تکمیل دستی را حذف می‌کند |
| Rated load capacity of supports | Whether heavy coils are safe to load |
| Safety: emergency stop, guarding, certs | در این کلیپ قابل مشاهده نیست، کتباً تأیید کنید |
ارسال به تامین کننده: Please confirm for a cable coil packing machine: (1) supported coil outer and inner diameter, width and weight range; (2) film type, width and number of layers; (3) cycle time and coils per hour at our coil size; (4) whether film start, cutting and end sealing are automatic; (5) rated load capacity of the support; (6) fitted safety devices (emergency stop, guarding) and certifications. Our coils are wound cable and wire, outer diameter [X] mm, width [X] mm, weight up to [X] kg.
سوالات متداول
Does this machine spin the coil? No. The video shows a static-coil machine: the coil stays still on the support columns while the wrapping mechanism moves around it. If a turntable design is better for your product, ask the supplier to compare the two.
What coil sizes can it accept? The video does not show a size range. Ask the supplier for the outer and inner diameter, width and weight limits, and compare them against your full coil mix.
Is the film applied and finished automatically? In the video the wrap and the end seal appear automatic, while the operator checks the finished coil. Confirm whether automatic film start, cutting and end sealing are standard on the model you are quoted.
خواندن مرتبط
- دستگاه بسته بندی کابل
- دستگاه سیم پیچی و بسته بندی کابل اتوماتیک آنلاین
- خط بسته بندی و کلاف بندی کابل اتوماتیک
- خط بسته بندی و جمع آوری کابل کشی خودکار آنلاین
- دستگاه بسته بندی سیم پیچ کابل و تغذیه آرم
- دستگاه سیم پیچ اتوماتیک کابل
مرحله بعدی
ترکیب کویل خود را برای تامین‌کننده ارسال کنید: قطر بیرونی و داخلی، عرض‌ها، محدوده وزن و حجم روزانه، و شش رقم تأیید را از چک‌لیست بالا درخواست کنید.
Then confirm on a trial run that your actual film applies and seals cleanly on your coil surface.
Then plan staffing: the operator loads, starts and checks each coil. Use the صفحه تماس با برای شروع آن تبادل.
آخرین بررسی: 2026-09-24
منتشر شده: ۲۰-۰۴-۲۰۲۶
