Resumen ejecutivo
Steel coil and wire coil wrapping machines wrap round metal coils so the surface stays clean and the coil holds together through storage and transport. The machine in this demonstration is a ring-type, or orbital, wrapping machine: a ring moves around a stationary metal coil while a thin wrapping material — foil- or film-like — is fed from a large roll and applied in a spiral. We build coil wrapping machines that run one round coil at a time. Coil range, material and wrap pattern are confirmed per project.
Índice
- Why coils need machine wrapping
- Qué hace la máquina
- The ring moves, not the mass
- One coil at a time
- Lo que muestran las imágenes
- Configuración típica
- Lista de verificación de selección
- Operación y seguridad
- Preguntas frecuentes sobre ingeniería
- El próximo paso
- Lectura relacionada
- Fuentes y estándares
Why coils need machine wrapping
Round metal coils are heavy, they shift easily, and an uneven wrap lets dust and moisture reach the surface or lets the coil loosen in transit. Hand wrapping a large coil rarely applies material evenly, so protection is inconsistent from coil to coil.
A machine that applies the material in a controlled spiral gives every coil the same coverage. The wrap standard and material are confirmed per project.
Qué hace la máquina
The machine is a ring-type, or orbital, coil wrapping machine. A large circular ring surrounds the coil, and the ring moves around the stationary coil while material from a big roll feeds through guides and applies in a spiral. Because the ring orbits the load instead of spinning the coil, the heavy coil stays in place during the wrap.
A control cabinet with pushbuttons and indicator lights sits on the left, and operators guide the coil into the ring at the start. The degree of automation and the cycle are confirmed with the manufacturer per project.
The ring moves, not the mass
The point of a ring-type design is that the wrapping element travels around the load while the coil itself stays still. That avoids having to spin a heavy coil, which matters as coil size grows. The material unwinds from the roll, passes through rollers, and wraps the coil in an even spiral as the ring completes its pass.
Each ring pass overlaps the previous layer, building the wrap from the inside out. Ring travel and wrap overlaps are confirmed per project.
One coil at a time
The footage shows a single large, round, steel-grey metal coil being wrapped. One coil at a time is what the ring size is set up for, so the machine suits coils that are handled and shipped separately. Coil dimensions and weight are confirmed per project.
Lo que muestran las imágenes
Our footage shows a ring-type coil wrapping machine applying a thin, foil- or film-like wrapping material to a single round metal coil. It is a general demonstration, so your coil range, material and wrap pattern are confirmed with us per project.
Configuración típica
Las cifras que aparecen a continuación muestran los límites de diseño funcional en lugar de valores numéricos, y se confirman para cada proyecto.
| Parámetro | Rango típico, confirmado por proyecto |
|---|---|
| Carga | single round metal coil |
| Envuelva | ring-type orbital spiral |
| Material | foil- or film-like, roll fed |
| Posicionamiento | operator-guided into the ring |
| Control | control cabinet with pushbuttons |
| Suministro eléctrico | 380 V trifásica 50 Hz, o 220 V monofásica para maquinaria ligera, según se requiera para cada proyecto. |
Lista de verificación de selección
| Pregunta | Confirmar por proyecto |
|---|---|
| Rango de carga | Diámetro exterior, ancho y peso de la bobina |
| Anillos | clear orbit for the coil |
| Material | type, width, tension |
| Alimentando | roll size, splice method |
| Control | Opciones de PLC |
| Suministro eléctrico | voltaje, fase y frecuencia en el sitio |
Operación y seguridad
Position the coil inside the ring, start the cycle, and the ring applies the material around the stationary coil. Keep clear of the ring path and the material feed while the machine runs, with guarding and emergency stops at the operator position.
Routine checks cover the ring drive, material feed, rollers and control, per the machine manual. Confirm the wrap settings against the coil before each run.
Preguntas frecuentes sobre ingeniería
Q: What does this machine do? A: It wraps a round metal coil with a thin material applied in a spiral by a moving ring.
Q: Why move the ring instead of the coil? A: The heavy coil stays still, so the wrapping element travels around it.
Q: What material does it apply? A: A stretch film or film-like wrapping material, roll fed; the material is confirmed against the coil finish per project.
Q: Does it run unattended? A: The footage shows operators guiding the coil into the ring; confirm the automation level per project.
Q: What does the footage prove? A: A single round metal coil being wrapped by a ring-type machine in one continuous demonstration.
El próximo paso
- Envíenos un correo electrónico a info@fhopepack.com con las dimensiones y el peso de su bobina.
- We send a coil wrapping machine proposal and a layout drawing within 48 hours.
- We arrange a site survey to confirm coil range and wrap requirements.
Lectura relacionada
- Máquinas para envolver bobinas
- Envolvedora de bobinas de acero
- Línea de embalaje de bobinas
- Líneas de productos de maquinaria de embalaje FHOPE
Fuentes y estándares
- ISO 12100:2010 Seguridad de las máquinas, principios generales para el diseño y la evaluación de riesgos.
- EN 415-10:2014 Seguridad de las máquinas de envasado, requisitos generales
- EN ISO 13849-1:2023 Seguridad de las máquinas, partes de los sistemas de control relacionadas con la seguridad.
FHOPE steel coil and wire coil wrapping machine demonstration video. Reviewed as a general demonstration; coil range, material and wrap pattern confirmed per project.
Última revisión: 11/10/2026
