Περίληψη
Heavy linear loads need a keyed base, and a wrapper that ignores the bottom leaves the load to roll or shift in the film. This horizontal wrapping machine works with timber placed on the bottom, wrapping the load and its base as one for a steadier pack. We build horizontal wrapping machines for based loads. Load range and base plan are confirmed per project.
Πίνακας περιεχομένων
- Why the base matters to the load
- Τι κάνει το μηχάνημα
- Wrapping load and base together
- The timber base under the load
- Stability through the wrap
- A load that rides steadier
- Τυπική διαμόρφωση
- Τι δείχνει το βίντεο
- Λίστα ελέγχου επιλογής
- Λειτουργία και ασφάλεια
- Συχνές ερωτήσεις μηχανικής
- Επόμενο βήμα
- Σχετική ανάγνωση
- Πηγές και πρότυπα
Why the base matters to the load
A long heavy load resting on film alone can roll, because nothing anchors it to the floor of the pack. A timber base under the load gives the wrap something to key against. Wrapping the base with the load is what makes the pack stable from the bottom up. The load and its base are confirmed per project.
Τι κάνει το μηχάνημα
The machine wraps the load together with the timber base under it, applying horizontal film around load and base as one pack. The wrap holds the load onto its base, so the pack rides as a single unit. Because the base is inside the wrap, the load is keyed for the trip. The covered cycle is confirmed per project.
Wrapping load and base together
Film is applied around the load and its timber base in the same pass, so the two are bound as one. Wrapping them together is what stops the load shifting off its base in transit. The film and its passes follow the pack, confirmed per project.
The timber base under the load
The timber base sits under the load, giving the pack a stable bottom that the film can hold against. The base carries the load’s weight into the wrap and spreads it onto the floor of the pack. The base’s size follows the load, confirmed per project.
Stability through the wrap
Film tension holds the load against its base around the whole length, so the load cannot roll within the pack. Stability is built by wrapping the base in, not just around the body. The pack holds its line from base to top. The tension plan is confirmed per project.
A load that rides steadier
What leaves the machine is a load that rides steadier: wrapped onto its base, so the forklift, rack and truck move a single unit. A steadier ride is what the load’s weight and length demand. The machine closes the pack at that standard. The pack standard is confirmed per project.
Τυπική διαμόρφωση
Τα παρακάτω σχήματα παραθέτουν τα λειτουργικά όρια σχεδιασμού αντί για αριθμητικές τιμές και επιβεβαιώνονται ανά έργο.
| Παράμετρος | Τυπικό εύρος, επιβεβαιωμένο ανά έργο |
|---|---|
| Φορτίο | heavy, long |
| Βάση | ξυλεία |
| Τυλίξτε | οριζόντιος |
| Περάσματα | όλο το μήκος |
| Έλεγχος | PLC |
| Ηλεκτρική τροφοδοσία | 380 V τριφασικό 50 Hz ή 220 V μονοφασικό για ελαφριές μηχανές, επιλεγμένο ανά έργο |
Τι δείχνει το βίντεο
Our footage shows a horizontal wrapping machine wrapping a load with timber on the bottom. It is a general demonstration, so your load range and base plan are confirmed with us per project.
Λίστα ελέγχου επιλογής
| Ερώτηση | Επιβεβαίωση ανά έργο |
|---|---|
| Φορτίο | μεγέθη, βάρη |
| Βάση | timber plan |
| Τυλίξτε | οριζόντιος |
| Περάσματα | μήκος |
| Έλεγχος | PLC |
| Ηλεκτρική τροφοδοσία | τάση, φάση και συχνότητα επί τόπου |
Λειτουργία και ασφάλεια
Run the cycle from the panel and the machine wraps the load and its base automatically. Keep clear of the wrap ring, film path, load and outfeed while the machine runs, with guarding and emergency stops at the operator position. Routine checks cover the ring, film carriage, feed tables, sensors and control, per the machine manual. Confirm the wrap settings against the load and base before each run so packs hold.
Συχνές ερωτήσεις μηχανικής
Q: Why wood under the load? A: The timber base gives the wrap something to key the heavy load against.
Q: What does the machine wrap? A: The load together with its timber base, in the same horizontal pass.
Q: How does the base help? A: It carries the load’s weight into the wrap and spreads it onto the pack floor.
Q: How is stability built? A: By wrapping the base in with the load, so the pack holds line to line.
Q: What rides out? A: A load wrapped onto its base, riding as a single unit.
Επόμενο βήμα
- Email us at info@fhopepack.com with your load range and base plan.
- We send a horizontal wrapping proposal and a layout drawing within 48 hours.
- We arrange a site survey to confirm load range and timber base.
Σχετική ανάγνωση
- Μηχάνημα περιτύλιξης και περιτύλιξης ξύλινης ξυλείας
- Οριζόντια ελαστική μηχανή περιτυλίγματος για μεγάλα αντικείμενα
- Οριζόντια μηχανή περιτύλιξης για πόρτα και πάνελ
- Σειρές προϊόντων μηχανημάτων συσκευασίας FHOPE
Πηγές και πρότυπα
- ISO 12100:2010 Ασφάλεια μηχανημάτων, γενικές αρχές σχεδιασμού και αξιολόγηση κινδύνου
- EN 415-10:2014 Ασφάλεια μηχανών συσκευασίας, γενικές απαιτήσεις
- EN ISO 13849-1:2023 Ασφάλεια μηχανημάτων, εξαρτημάτων συστημάτων ελέγχου που σχετίζονται με την ασφάλεια
FHOPE horizontal wrapping machine demonstration video. Reviewed as a general demonstration; load range confirmed per project.
Τελευταία αξιολόγηση: 10-10-2026
