Ρυθμιζόμενο, πολλαπλών χρήσεων πηνίο κλίσης με συρόμενο τραπέζι

Περίληψη This video shows a yellow semi-circular coil tilter mounted on a blue base, holding a plastic-wrapped cylindrical metal coil. The machine tilts the coil smoothly and continuously from a horizontal position toward an angled position, with two yellow side plates keeping the coil supported throughout the motion. The video does not show the sliding table in operation, load ratings, controls, or safety equipment — all of these should be confirmed with the manufacturer before purchase.

Coil tilters exist for one simple reason: coils are heavy, awkward, and dangerous to reposition by hand or with a crane alone. If your line needs coils turned from eye-to-the-sky to eye-to-the-horizon orientation — or held at an intermediate angle for welding, unwinding, or inspection — the machine in this video is one way to do it. Below we describe exactly what the footage shows, what it does not show, and what a buyer should verify.

Η μηχανή σε δράση

The video runs just over a minute and shows a single, unhurried demonstration cycle:

1. Opening (0 s): The machine stands in an industrial workshop. A large cylindrical metal coil, wrapped in clear plastic film, rests horizontally inside the tilter. The machine is a large yellow semi-circular structure mounted on a blue rectangular base.
2. Tilting motion (0–56 s): The yellow semi-circular rotating platform begins to tilt toward one side at a constant speed. The coil turns with it, its axis moving gradually away from horizontal. There are no pauses, jerks, or visible speed changes — the rotation is smooth and continuous.
3. Holding during rotation: Two yellow vertical plates inside the rotating structure keep the coil supported and positioned as it tilts. The coil does not shift or slip relative to the platform.
4. Closing frames: In the later part of the video, the machine is shown in a static state, with the coil resting level on an internal sliding platform. The camera pans slightly, confirming the layout: a semi-circular yellow clamp assembly pivoting on a blue base, with lifting rings at the top and bottom of the structure.

The movement is deliberately slow and controlled. For heavy coils, that is a feature, not a weakness — a fast tilt would risk the load shifting, while a steady rotation gives operators time to monitor the coil and stop if anything looks wrong.

Τι δείχνει το βίντεο

The coil in the demo is roughly as wide as it is tall — a short, stout cylinder — and its diameter closely matches the inner opening of the semi-circular clamp. Its length spans about two-thirds of the clamp opening, which suggests the machine is designed to accommodate a range of coil widths rather than a single fixed size. That is consistent with the “adjustable, multipurpose” description in the product name, though the adjustment mechanism itself is not demonstrated on camera.

Τι δεν δείχνει το βίντεο

This is a short demonstration clip, and it is important to be clear about its limits:

• Ονομαστική χωρητικότητα φορτίου — the maximum coil weight the tilter can safely handle is not stated anywhere in the footage.
• Διαστάσεις και βάρος μηχανής — no measurements are visible or given.
• χρόνος κύκλου — the tilt shown takes roughly a minute; production-rate timing for your coil sizes must be confirmed.
• Sliding table operation — the slid table is visible as a structure inside the clamp, but its sliding stroke and how it feeds or discharges the coil are never demonstrated.
• Έλεγχοι — no control panel, buttons, screen, or indicator lights appear in the frame. The control method (pendant, panel, remote, foot switch) is unknown from the video.
• Εξοπλισμός ασφαλείας — no emergency stop, guarding, light curtain, warning labels, or interlocks are visible. This does not mean the delivered machine lacks them; they are simply not shown.
• Προδιαγραφές — no CE, ISO, or other certification marks appear.
• Φόρτωση και εκφόρτωση — the coil is already on the machine when the video starts, and it is still there when the video ends.

Σημειώσεις άμεσης παρατήρησης

The block below stays close to the source analysis of the footage, with only light grammar-level editing. It is the factual anchor for everything above.

The machine consists of a yellow semi-circular rotating platform mounted on a blue rectangular painted-steel base. Two yellow vertical plates inside the rotating structure support and hold the cylindrical workpiece. Yellow lifting rings are fitted at both ends of the rotating platform for crane handling. A horizontal sliding platform sits inside the semi-circular clamp assembly, carrying the coil; its sliding function is not demonstrated in the footage. During the first 56 seconds the platform tilts at a constant speed toward one side, and the plastic-film-wrapped coil turns with it, its axis moving from horizontal to a clearly angled position. The rotation is smooth and continuous, with no pauses or acceleration. In the latter part of the video the machine is stationary, the coil resting level on the slid table, with no feeding, processing, or unloading observed. No control panel, emergency stop, guarding, light curtain, warning labels, or interlocks are visible. No readable text, nameplates, or watermarks appear in any frame. Background music plays throughout; there is no narration.

Where a coil tilter like this fits

Based on the visible capability — smooth, controlled tilting of a large coil — the typical applications are:

• Production positioning: presenting a coil at the correct angle for welding, cutting, painting, or assembly work.
• Line feeding: reorienting coils before they enter an upstream or downstream machine.
• Inspection and repacking: turning coils so surfaces can be checked or re-wrapped.
• Ασφάλεια χειρισμού: replacing crane-and-sling flips, which are among the riskiest routine lifts in a coil store.

The lifting rings on the rotating structure also suggest the unit can be relocated within a plant by crane, which suits workshops that need a tilter at more than one station over time.

Κριτήρια καταλληλότητας: είναι αυτός ο τύπος μηχανής κατάλληλος για εσάς;

Χρησιμοποιήστε αυτήν τη λίστα ελέγχου πριν ζητήσετε προσφορά:

• Your coil weight is within the tilter’s rated capacity — verify the rating with the manufacturer (not shown in video).
• Your coil diameter and width fit the clamp opening and the adjustable range of the support plates.
• You need controlled tilting — and, if relevant, confirm exactly how the slid table loads and discharges the coil.
• You know which control method you require (manual, pendant, integrated panel) — confirm what is supplied.
• Your site safety requirements (E-stop, guarding, interlocks) are defined, and you confirm which safeguards are included or must be added.
• Power supply requirements at your location match the machine’s drive — confirm motor/power specs with the manufacturer.

Ερωτήσεις προς επαλήθευση με τον κατασκευαστή

1. What is the maximum rated load, and what coil diameter/width range does the clamp accept?
2. How does the slid table operate — its stroke, direction, and role in loading/unloading?
3. What control method is supplied as standard, and what options exist?
4. What safety features are included (E-stop, interlocks, guards), and can the machine be certified for your local regulations?
5. What is the typical tilt cycle time for a coil at my weight?
6. What are the power supply and installation requirements?

Συχνές Ερωτήσεις

Does the video show the sliding table working? No. The slid table is visible as a horizontal platform carrying the coil inside the clamp assembly, but its sliding motion is never demonstrated. Ask the manufacturer for a second video or a live demonstration of that function.

How is the coil held during tilting? Two yellow vertical support plates inside the rotating platform keep the coil positioned throughout the tilt. In the footage, the coil stays firmly in place with no visible shifting.

Can the tilt angle be set to intermediate positions? The video shows a continuous, smooth tilt, which suggests angle control is possible, but the stopping mechanism is not shown. Επικοινωνήστε με τον κατασκευαστή how intermediate angles are set and held.

What loads can it handle? Not stated in the video. Rated capacity must be confirmed with the manufacturer for your specific coil weights.

Είναι αυτόματο; The video shows no control panel or automation hardware, so the level of automation cannot be judged from the footage. Confirm the supplied control configuration before ordering.

Πηγή και μέθοδος

This article is based on the product video embedded above. The footage was analyzed frame-by-frame using a local vision-language model; the video contains background music only, with no narration or speech, so no transcript was used. All factual statements describe what is visible in the frames; anything not observable is either omitted or explicitly marked for verification. Specifications, load ratings, and safety configurations should always be confirmed directly with FHOPE before purchase.

Σχετική ανάγνωση

• Μηχανές ανατροπής πηνίων
• Αυτόματη γραμμή συσκευασίας πηνίου
• Κύριο περιτύλιγμα πηνίου
• Μηχανή συσκευασίας σερπαντίνας
• Μηχανή περιτυλίγματος από χάλυβα

Επόμενο βήμα

If this adjustable coil tilter looks like a fit for your workshop, contact the FHOPE team via the σελίδα επικοινωνίας to confirm load ratings, slid table operation, control options, and safety configuration for your specific coils — and to request the full specification sheet.

Δημοσιεύτηκε: 2026-09-03