Horizontal Ring Orbital Stretch Wrapper with Press-Down

Name: Horizontální kruhový orbitální balicí stroj s přítlačným zařízením
Uploaded: 2018-04-19T03:06:21+00:00
Duration: 1 min 46 s
Description: > **Executive summary** > Our horizontal ring orbital wrappers hold each load with press-down devices while the ring spirals film around it. That lets short loads from **800 mm** long cross the gap at the ring without tipping. The E600 takes bundles of 200–600 mm OD, and the E1400 takes…

Shrnutí Our horizontal ring orbital wrappers hold each load with press-down devices while the ring spirals film around it. That lets short loads from 800 mm long cross the gap at the ring without tipping. The E600 takes bundles of 200–600 mm OD, and the E1400 takes objects up to 1,400 mm wide and 1,000 mm high.

Why loads need holding

On a horizontal ring orbital wrapper, the load travels from the infeed conveyor across the ring to the outfeed conveyor. The ring needs a gap between the two conveyors to pass the film under the load. A short or light load can tip or shift at that gap, and film tension can twist a box as the ring turns.

Our wrappers solve this with press-down devices and supportive rollers that fix the load’s position. On the E1400, the press-down holds a short load steady, so it passes the gap between the conveyors without tipping.

How the press-down devices work

vlastnost	E600	E1400
Přítlačná zařízení	two, on the infeed and outfeed conveyors	press-down device and supportive rollers
Kontaktní plocha	soft material, for glass surface protection	version chosen by load shape
Boční vodítka	protective devices on both sides, adjusted by hand	potvrzeno v návrhu
Načasování tisku	adjustable action time	potvrzeno v návrhu
Snímání polohy	four position sensors from infeed to outfeed	potvrzeno v návrhu

The press-down rollers hold the carton flat while film tension pulls on it, so the load keeps its line through the ring. Our video shows yellow press-down rollers on a carton inside the red ring.

E600 horizontal ring orbital stretch wrapper with press-down devices — **Orbitální obal E600.** Two press-down devices hold the load at the ring.

E600 nebo E1400

Parametr	E600	E1400
Délka zátěže	přes 1 400 mm	1,000 – 3,000 mm
Velikost nákladu	bundle OD 200–600 mm	width 300–1,400 mm, height 50–1,000 mm
hmotnost nákladu	20 200 - XNUMX XNUMX kg	potvrzeno v návrhu
Rychlost dopravníku	3–12 m/min	4–15 m/min
Rychlost zvonění	potvrzeno v návrhu	10 60–XNUMX XNUMX ot./min
Materiál	LLDPE strečová fólie, papírová nebo tkaná	paper, LLDPE stretch film, PE film or PVC
Materiální role	Šířka 150–300 mm, vnější průměr 100–250 mm, jádro 50 mm	300 or 500 mm wide, 200–300 mm OD

Choose by cross-section. Illustrative examples: a 400 × 300 mm carton has a diagonal of √(400² + 300²) = 500 mm, inside the E600’s 600 mm window. Leave clearance for the film carriage as well, and we check the margin on your drawing. A 1,200 × 600 mm panel stack is too large for that window, so it needs the E1400.

Čas na jedno nabití

Travel time = load length ÷ conveyor speed. For a 1,200 mm carton (illustrative) on the E600:

Při rychlosti 12 m/min: 1.2 ÷ 12 = 0.1 min, neboli 6 s.
Při rychlosti 3 m/min: 1.2 ÷ 3 = 0.4 min, neboli 24 s.

The press devices close and open each cycle, and the film is clamped and cut, so we time the full cycle on your load.

Partial wraps with head and end delay

The E600 has a head delay and an end delay for partial wrapping. The ring starts wrapping a set distance after the load’s leading edge and stops before its trailing edge. That leaves the ends open for handling, labels or ventilation, and saves film. Ring speed and conveyor speed are set on the touch screen.

Veřejné služby a bezpečnost

Užitečnost	E600	E1400
Výkon	asi 4.5 kW	asi 4.5 kW
napájení	380 V stř., 50 Hz, 3 fáze	380 V stř., 60 Hz, 3 fáze
velikost stroje	cca 6 300 × 2 500 × 2 500 mm	potvrzeno v návrhu

A protection shield covers the machine structure and moving parts. The standards that apply depend on the destination market. For CE markets, ISO 12100 sets the risk-assessment method and EN 415-10 sets general requirements for packaging machines.

Selection checklist for an orbital wrapper with press-down

Shortest load length.
Load width, height and weight.
Surface finish: glass, lacquer or plain carton.
Full wrap or partial wrap with open ends.
Film, paper or woven material.
Zatížení za hodinu.

Často kladené otázky k inženýrství

Q: How short can a load be? A: Over 800 mm on the E600, and from 1,000 mm on the E1400.

Q: Will the press-down device mark glass or lacquered surfaces? A: The E600’s top press device uses soft material for glass surface protection.

Q: Can the machine leave the ends of a load unwrapped? A: Yes. The E600’s head delay and end delay create partial wraps.

Q: How long does a 1,200 mm carton take? A: 6–24 s of travel at 3–12 m/min on the E600, before press and film cut.

Q: Which model for a 1,200 × 600 mm panel stack? A: The E1400, which takes objects 300–1,400 mm wide and 50–1,000 mm high.

Další krok

We size your orbital wrapper in three steps:

Odešlete svůj výkres rozvržení with load sizes and loads per hour to info@fhopepack.com.
Získejte nabídku do 48 hodin, with the model, press-down setup and material.
Rezervujte si průzkum lokality aby se obal přizpůsobil vaší linii.