tyre packingmachine is higher than the length of equipment

As claimed in assert 6, in which the wheel packing machine, described in this explained guideline groove (33) for your about three guide grooves (33) in the guideline shaft (31) as a centre to the 3 o’clock direction, respectively, 9 o’clock, 12 o’clock, wheel lever in to the Agency’s activities (35) is split in a movable rod (35 ‘) and 2 movable rod (35 “), a movable rod (35’) throughout the shaft with two Level the lively lever (35 “) connected to a movable rod (35 ‘) is installed to the top dish wave sweep (37), the supplementary movable rod of tyre packing machine and also the rod (34) along with the movable block, hooking up indicates with all of those other location of your movable rod (35) linked in a similar manner; the rest place the movable rod (35) is additionally placed on the second movable rod (38), the active lever (35) is also connected to the top of influx sweep plate (37), the auxiliary movable rod (38) – end from the wave sweep platter (37) with a shaft connected to the auxiliary movable rod (38) through a shaft and the other end of the strut (34) linked to rod (34), the productive lever (35), the secondary movable rod ( 38), waves sweep plate (37) to form a parallelogram railing companies, surf sweep plate (37) has a work surface remember to brush.

As stated in declare I where the tire tyre packing machine, distinguished in this explained inner adhesive means (7) are mounted on the flange comprises indicates (6) two mounting foundation (28) around the two linear information side rails (39), linear information of tyre packing machine are mounted across the linear manual (39) moving bracket (40), owner (40) in the best have got a small (41), in the briquetting (41 ) within a hard drive-molded pressure platter, two stretches clamps (41) from the stress dish in accordance with nip.

(10) according to tyre packing machine, wherein the tire packing machine, characterized in that said pressure plate, respectively chopping platen (42) and the cutting pressure plate (43), the cutting platen (43) smaller in diameter than chopping platen ( 42) the diameter of the cutting pressure plate (43) extending into the side clamps (41) mounted on a lid-shaped blade cover (44) and blade cover (44) is mounted within an annular heat cutter (45), cyclic heat cutter (45) in the cutting pressure plate (43) on the outer periphery, into the clamps (41) is provided with a through hole, the through hole is connected to waste recovery, including recovery of the waste into the clamps (41 ) connected via the trachea, air pump connected with the trachea.

Comments are closed. Posted by: stretchwrapping on

Tags: , ,