Stretch film information

stretch film
stretch film, LLDPE FILM


Industry vocabulary:

1) Portion of Stretch: 10″ to 30″ is 200%, etc, if you stretch 10″ of film to 20″ that is 100% stretch.

2) Portion of Prestretch: This is actually the maximum % of prestretch that the film carriage is tailored for supply.

Be aware: The % can be decreased even before the film leaves the film carriage by a variety of reasons.

– surroundings, background temperature, dampness, etc

– film density

– kind of film…cast, blown, one-sided hang on, and so on

– situation of prestretch rollers

The above mentioned good reasons can deal with almost every existing application but this is correct for all film carriages. Take for example

cast film as being a achievable reason for lowered Percent of prestretch  film departing a film carriage. The bulk of film being utilized nowadays is

cast but you can find a large number of different cast motion pictures. Some differential and one-sided hang on cast movies have very

tiny “stick” and will fall on the pre-stretch  film rollers. Some cast film recipes produce an incredibly powerful film plus it requires

more hard work to stretch the film. Other cast movies acquire more than usual “film recovery” so that you drop some prestretch Percent

when the film simply leaves the carriage (see under).

Our Super Quick Line II film carriage using its unique threading approach and a lot more film-to-silicone roller get in touch with is

designed to provide the best results for the various sorts of movies and varied applications however the final results

are relying on the range of factors in the above list.

3) Force-To-Weight (secondary stretch or pressure): This modification is usually found on the encounter from the management panel and

manages how much extra stretch is released after the prestretched film foliage the carriage. Considering that the fill needs to

move in the film to increase the Per cent of stretch, lighting lots will demand really little or no push-to-weight.

Essential: The pressure-to-weight setting is critical to maintaining the Percent of prestretch. If the prestretched film foliage

the carriage at 200% it wants to go back to its original shape before it is applied to the load. We call this film recuperation,

come back, rubberized music group aspect, etc. if there is no or little force-to-load being applied because you are wrapping light loads

the 200% may be reduced considerably by the time the film actually reaches the stress. If you have a 200, this means that even%

tailored film carriage you may actually calculate something significantly less when determining the Per cent of stretch in the load. You require X

quantity of force-to-load to support the 200 Per cent prestretch. The stretch film from Fhopepack is changeable according to the application.

stretch hood film
stretch hood film

There is stretch hood film available from Fhopepack per your packaging requirement

Comments are closed. Posted by: fhopepack on

Tags: , ,