panel product packaging series for horizontally packing a slender film

[3] This kind of lean film show panel often is available into the industry as one half-finished product or service. That is certainly, the slim film show panel will not be exported as a completed item but is exported as one half-completed item which can be divided in to a unit plus a covering, for inexpensive functions. Afterwards, the item is built inside an importing nation.

According to production conditions, [4] As such, a thin film display television may be produced in an intermediate manufacturing factory, in the form of a thin film display panel module which is a half- finished product and has only a glass substrate, a drive circuit, a power supply, and a video card. Otherwise, the slender film exhibit tv might be generated such as a finished product or service equipped with a Tv set receiving established (tuner), a lecturer, yet others.

[5] The thin film display panel may be broken or damaged by even small vibrations or shocks during transportation, because of the properties of the thin film display panel which is thin and has a large screen. Additional, malfunctioning electrodes and partition wall space, or foreign resources may cause the failure of the push circuit.

In order to more safely transport the thin film display panel, as shown in FIG, [6] Thus.

1, a standard box for packing a thin film display panel incorporates a primary system 1 and a protect 2. Partition surfaces 3 are supplied at normal time periods to ensure that lean film screen individual panels M generated as a half-done product are saved in an area based on the principle system 1 and also the cover 2.

[7] More, extra shielding products 4 are made to protect generate circuits Ml offered on again surfaces and exterior circumferential types of surface in the slim film screen sections which can be held in the packing package and so are made as a half- concluded product or service. The guarding units 4 are built to become attached towards the back again areas in the slender film screen sections. In this status, the slender film exhibit panels are stuffed from the packing package to get offered to some client.

[8] Such a packing method may be useful in the way it is where item is provided with an consumer in the form of a finished product. The packing method is unsuitable for packing the thin film display panel which is a half-finished product, however.

Comments are closed. Posted by: stretchwrapping on

Tags: , , , ,