A Few Points You Did Not Understand Regarding cable wrapping machine
If the drums are placed so that the central axis is vertical, when the cable or line drums are being transported they must be placed so that their central axis is horizontal, to ensure that the turns of the cable remain close together in each layer, which is impossible. The drums take significantly more space when standing upright than when lying and should not be saved one particular on the top of another. If the edge portions have been attacked by decay, when they are being loaded a fork truck must be used which is inserted under the end pieces, and the edges of these as well as the cable or line may easily be damaged during lifting, particularly. In order to provide a grip for a lifting device, during unloading rods are applied through the central holes. The unloading work is as a result reasonably time-consuming. Drums which have been placed out over the soil have to then be lifted up and placed on the uncoiling trestles, which might be completed with implements which could cause critical problems for the end items. In some cases the coil can even be purposely interested in order that the cable or lines are broken.
Tags: cable coiling machine, cable packing, cable wrapping, coil packing