Tilter and upender’s invertor

 

upender

 

http://www.fhopepack.com/Coil_upender.html

一:access authority change

  1. Press ”P“ access data
  2. Press  “Δ”  selecting P003 (access authority)。
  3. Press “P” into six parameters.
  4. press “Δ”  or “ᴧ” selected P000 3 TO 4 (4level access authority)

 

二:Ring reset speed amend   (C modify way as above)

  1. Selected P1001(reset speed)
  2. If speed is high, reducing figure in P1001.

 

三.Reset time amend

 

When the ring reset is not in the right position.

 

  1. Selected P1061

2. Adjusting the figure more or less accordingly.

 

Note:For ring gap in botton,pls try to reduce the figure.

Comments are closed. Posted by: stretchwrapping on

Tags: , , ,