tilter and special function requirement

coil upender, tilter
In fhope, we're not only producing elastic packaging, but also handling equipments. FHOPE supplies up ending solution, Coil tilter/coil upender was applied for cable/steel/mould industries. Our sales, equipment service, customer service and engineering departments can help you design the optimum protective packaging system for your application. Main parameter Weight of the drum 10T Outer diameter of coil <Φ1400mm Width <1400mm Main turn speed(high/low) 15-45sec/pcs Up ending perspective 90 degree Power supply(high/low) 250V 50Hz Features: Individual electric panel control. Inverter controls that allow speed adjusting. Steady contracture, oblique gear and worm speed reducer. Micrometric setting device make machine adjustable in irregular floor. Electric and Mechanical displacement restrictors adopted to grantee a safety operation. Position locking function allowing machine stop at any angle. Supportive roller device covered with polyamide. Automatically position fixing when power off for safety operation. Working table designed according the mould.

 

http://www.fhopepack.com/Coil_upender.html

Could you send a layout(schematic ) of your system considering all the requirements asked?——Ok,please let me have your idea about the position of the light xxxx
Can we consider to install your tilter into the floor?—–ok
If yes, can you send the drawing of the foundation to be done on the floor?——Waiting for light xxx position
Is it possible to do a remote control for the fork lift operator ?——Possible
The emergency controls must be connected to a safety interface and the emergency buttons must be connected to a dual channel. —-Not problem
The best way is to send us the electrical drawings first for approval and components list. We need the electrical parts code to confirm.
—–Sorry, it is a customized solution, we don’t have the electrical drawing before production. Components list will be provided soon.

Comments are closed. Posted by: stretchwrapping on

Tags: ,