coil wrapping machine for wire coil

When fpc-300 is used in combination with fpc Steel WIRE Coil wrapping machine, the fpc1 is applied to the load when the parameters are set by the operator. The setting position of the packaging parameters is on the tensile packaging to make the number and position of fpc1 can be changed so that the maximum load retention is well provided. The load is packaged in the same way every time it is guaranteed by these parameters.
Changes in fpc1 performance need to be considered when the fpc1 requirements for a particular application are determined. If these variables are reduced, you can appropriately select the type, size, and size of fpc1, which will be the most suitable for packages. When the performance of wire coil wrapping is selecting a thin film, the performance of stretching packaging machine cannot be ignored. The overall performance of wire coil packing is determined by the combination of packing machine fpc1 and stretch film quality. If your fpc1 cannot stretch the thin film to a place where these properties can be extracted, then the value is to buy high-performance fpc1.
The best performance of wire wrapping machine must be assured that testing control can be fully utilized, or fpc1 and fpc2’s existing performance should be matched by you.

The measurement of the diagonal coil or product load is the load diagonals. This size is critical when the overall size of the package is determined. This size varies from maximum load to package minimum, making the design of the machine affected. The equation of the load diagonal of any pallet can be determined as the square root of (L2 + W2).

The reason most companies have reason to use fpc1 is the physical requirement and inconsistency of stretching and packaging with their hands. A method of security is provided by the pallet packaging machine, can make the load keeps consistent, your pallet load can also be provided at the same time, professional appearance, and your customer requirements can be provided. The operator placed the pallet load on the turntable as well as fpc3, and the stretching loop was also activated. Fpc wire wrapping machine is then applied to fpc4. To meet your requirements, you need to pack the tray load. There are only ten pallet packs that can be used to justify pallet packaging every day.

Wire wrapping machine is able Significantly reduced the cost of consumable film and labor cost, The wire coil wrapping machine can use any kind of packing material in the market. There are solutions for wrapping machines (PVC, PE, etc.) for coils of LRPC Strand and LRPC wire. For stretch film using, compared to some loads, such as those without PRE stretched thin films. Fpc5 films can easily get 6-12 months of capital expenditure. Uniform stretching is not provided when tension or braking is used, so its performance cannot be repeated every day. This can lead to intermittent load failures. Since pre-stretching is more controllable than after stretching, the ideal is to maximize pre-stretching. How does the film come to the preview? The gear ratio of the gears is related to the diameter of the roller, and it is elongated mechanically between the two rollers to stretch the film. The surface rotation speed of the secondary roller is faster when the surface rotation speed of the secondary roller is compared with that of the main film. So what is post-stretching? The tension between the film tension and the loaded load is elastic stretching. If the film tension is stretched, the stretch will be increased by you.

wire packing machine and coil wrapping machine

The coil packing solution for paper, stretch film, PET strap .

info@fhopepack.com www.fhopepack.com
We are providing wire wrapping machine, wire coil wrapping machine, wire coil strapping machine, wire rod coil packing machinery…you can find different type coil packaging solution vary from coil packaging goal.

Automatic wire wrapping machine

Thank you for your kind email and appologize for the delay, here bellow the dimensions required for wire wrapping machine.

Max packed rolls WIDTH : W≤300mm
Packing Rolls Outer Diameter : 500mm≤OD≤900mm
Roll Inner Diameter: 400mm≤ ID≤700mm
Material: Roll craft paper or film
Roll width: 90mm
Rotation station speed : V≤40r/min
Max packing article weight : ≤300kg

 

 

 

we are multilayer wire producer and are interest about a wire coil roll packing machine,please tell us about your best offer .
.Best Regards.
Rais

Automatic coil strapping machine connect with coil wrapping machine for automatic handling the hose coil, pipe coil, wire coil, steel coil…

 

Wire wrapping machine and strapping machine

Please check the following answers:

By verifying the dimensions of the products we manufacture with respect to the specifications of the machine, we have the following considerations:
1. In the specification inner diameter we have rolls that exceed the maximum diameter, is there a problem in this situation?——No problem at all, the machine works for all ID shows in the list.
2. In the outer diameter all the products comply correctly——Ok
3. With the width all the products fulfill except one, it is not problem since we can make change of packing—–You are right, width 950mm is not in the wire wrapping machine FHOPE700’s packaging range.
4. In the specification of weight we have products that are below the minimum specification for 20 kg, consider this change in the design of the machine to load from 180 kg to 1000 kg
——It is ok for us.

wire packing machine and wire tilter
wire packing machine and wire tilter

Do you confirm me or do you have any questions?

The machine offered is using stretch film for wire packaging. If you need another packing material please let us know, such as Paper, PE film, HDPE film…
As you know, the machine will be designed according your wire coil size.

Therefore it will be little bit differently with our stanard equipment in size.

The attached one is for reference, we will provide Precise size after machine designing finished when is app. 15 days after receiving the down payment.

For the installation, it is easy to do by your people according the drawing and manual. We are providing, videos and pictures guide too

Sure, our service for installation and commissioning is available for wire wrapping machine and wire strapping machine too.

Air ticket, room and accommendation provided by your company. Besides, the feed is $100/day per engineer only.

 

Automatic horizontal stretch wrapper and coil packer is working for online horiontal wire coil packing too.

coil stretch wrapper and wire wrapping machine

 

 

Here is a summary of my meeting with Candice yesterday for wire coil packing machine:

1) The chain guards on the blocker rolls must be painted yellow.
2) The cabinet and operator station must be painted orange (the color chip was provided previously by SES).
3) Toeboards must be added to the hand railing. They must be 3mm thick X 100mm high.
4) Foundation drawings have already been issued to the customer in September. SES is checking to see if the foundation has been installed.
a. Candice gave me revised foundation drawings yesterday. However, the drawings do not match what is on the factory floor. Jinglin must verify and ensure the wire wrapping machine foundation matches the drawing.
b. The foundation bolt plan for both blocker roll stations must be the same. Candice indicated they are different. This does not agree with the foundation drawing that was submitted to the customer. Jinglin must verify and ensure both blocker roll foundations are the same.
c. The rear track does not match the drawing nor does it’s style of construction match the front track. It is also painted the wrong color. Is this track being re-used from the floor model stretch wrapper? Jinglin must verify and ensure the track matches the drawing and foundation.
5) It was noted that all motor voltages are 380V and that a step down transformer is being utilized. SES must confirm with the customer that this is acceptable and does not violate any local electrical code.
a. Jinglin must confirm the frequency of all motors. The specification was 460V 60 Hz.

 

 

Automatic wire packing machine

 

Following is my question:

A.COIL INFO

Coil No.
OD (mm)
ID(mm)
WIDTH(mm)
WEIGHT(Kg)
KS1P02
915
508
0.48
1.879
KP1P1
915
508
0.42
2.898
KM1P0
1020
508
0.25
3.504
KP1P1
860
508
0.40
3.119

B.PACKING MATERIAL.-
1.Paper wrap
2.Metal wrap
3.PP Sheet
4.Edge protector
5.Bore protector
6.Bore insert
7.Circle
8.Strapping wire.

——
Above material and packaging requirement is normally for jumble coil( big coil) packaging. So is above coil stacking together?
a. It is one coil one package or same coil stacking together for packaging?
b. can you show me the picture of the product need to be packing?
c. if it is one coil one package, following solutions are ok.
http://www.shjlpack.com/info/steel-coil-packing-line-video/
http://www.shjlpack.com/info/automatic-steel-coil-packaging-line-solutoin/
http://www.shjlpack.com/info/coil-packaging-line-solution-by-film-and-paper-wrapping/
d. if coils stacking together, please provide the whole coils Min&Max.Width.

 

 Horizontal wrapping machine for different package and packing goal.

We are an engineering company based in Malaysia. We would like inquire the steel wire wrapping machine from your organisation. Please refer to the attached document and provide us a reasonable quote for us to proceed further.

 

Wire wrapping machine and testing requirment

 

wire wrapping machine        wire coil stretch wrapper wire wrapping machine
Attached is the steel coil packing flow chart , Finished packing steel coil and cutomer factory packing line area for your reference.
Steel coil  having variable sizes ,weight .
Weight :   lowest 2500KG     Highest 5000KG
size : 1500mm W   1200mm dia    Inner dia: 500mm
I hope above information is enough to make proposal for us .
We are looking for fully packing automation wire wrapping machine system also partially packing automation system.

I have attached a PDF of things that I want to see during testing of the wire stretch wrapper.  This does not replace your testing procedure, so please use your plan for that.

I have allocated three days to be at your factory for wire wrapping machine testing.  The dates will be November 16, 17, and 18.

I am saying in Shanghai near Jing’An temple.  I’m planning on taking Subway Line 9 to Dongjing Station and taking taxi from there to your factory.  Will taxis be available at the station?  Is that the closest station to your factory?  What time in the morning should I arrive?

wire wrapping machine manufacturer in China

 

 

Thank you very much for your kindly attention. Sorry that we made a mistake in the previous letter. The characteristics of our products are as follows:
Coil weight:  200-5000kg
Coil width: 200-700 mm
20% of our products:
ID:300 mm OD 500-700 mm
80% of our products:
ID:300-500 mm OD: 700-1300 mm
Please send me a proper offer based on your vast experiences in this field.
Please send me your quotation including price and data sheets.
I am looking forward to hearing from you.
earing from your size wire wrapping machine-N is the best one for your packaging, since FPW1000 is too big for your coil size.
For a good package, the best coil range for packaging is OD:700-1300mm. OD;500-700mm is too small to wrapping.
It is a problem about big Wire coil wrapping machine for small coil packaging.
We can try to make wire packing machine working for OD:500-700mm. But one thing is clearly–the package is not as good as for big coil packaging.
Besides, if you have special requirement in packing material, please let me know.
Welcome to contact with me for further information.

Automatic Wire wrapping machine for PC wire

Please find the required info as below in RED FONT  in your table.

 

Additional info is given  in  below lines..

The piece of wood is 130 mm x 90 mm x 230 mm , 4 nos attached to bottom of coil for palletizing .

 

Attached please find the photo “IMG 0704” of product coil to be wrapped packed and palletized , tilted .

 

Complete packed coil look like in photo “IMG 0676” .

 

We expect to wrap pack about  100 coils a day .

 

Please feel free to ask more information if needed,

Thanks

Gokhale

 

 

Dear Mr. Jelloul,

 

This is Fhopepack, i will following up your need for PC Strand coil packaging machine.

 

Before offering a solution, i’d like to know the information following:

 

1. Coil info

Coil No. OD (mm) ID(mm) WIDTH(mm) WEIGHT(Kg)
1  1200 800  760  3000 
2  1250 800  760  3500 
3  1300 800  760  4000 
4  1150 800    760  2500 
…           5    1100    800   760   2000 

2. What is the packing material, such as HDPE, Paper…

First layer of HDPE  woven vci paper 180 gsm ,  and second layer of HDPE Woven plain poly with lamination on both side and printed GSS logo . The roll 150 width is wrapped with 75 mm overlap.

a. Vertical coil wrapper

 

 

<image029(08-26-13-20-07).jpg>

b. horizontal big coil wrapper

 

c. Automatic coil packaging solution

 

 

I think vertical coil wrapper is able meet your packaging goal.

 

Any requirement just feel free let me know. Our team will do best per your packaging goal.

 

wire wrapping machine        wire coil stretch wrapper wire wrapping machine
Wire coil packing machinery–FPW-300 Wire coil packing machinery–FPW-400 Wire coil packing machinery–FPW-500
wire coil packing machine wire coil wrapping machine Wire coil compactor and packing line
Wire coil packing machinery–FPW-600 Wire coil packing machinery–FPW-800 Wire coil compactor&strapping machine