The steady sandwich panel generation machine

This status-of-the-craft roll generating machine goes far more gauges, sizes and types of material in around 10 panel configurations with lowest adjustments and less scrap. Generating rollers for each profile could be modified out by merely one person in half an hour.

Features

Individual form and drive rollers, reduces most oils canning.

Polyurethane generate rollers

Stainless coated forming roller solutions.

Welded tubular structure

13 HP Honda engine

Hydraulic travel shear and system are electrically stimulated.

Clip reduction rollers (not offered with Series2000 Solar panel)

Two pair of 1″ broad adaptable smooth rib rollers

Considerably factor complete routine shear.

Available Options

12,000 lb. capability tandem axle trailers.

Twin over head de-coiler

16 inch to 20 inch expandable arbors

10ft. sections of adjustable height manage out tables (approximately 50ft. brackets on machine)

Two register electronic manage-panel quantity and length.

7.5 Hewlett packard motor unit, 220V 3PH. 60 Hz.

Striation rollers

Pencil Rib Rollers (3/8″ and 5/8″ wide)

Hot dissolve system sealant.

Hand seamer: 2400/2500 – 1300/1301.

Electric seamer to be used with A1300/A1301 or S2400/S2500 solar panels.

offers a complete line of composite individual panels and industrial/manufacturing walls sections, that may give any building a special look and feel.

Our Aluminum Composite Material (ACM) walls panels are exceptional for their light-weightweight and durability, and layout regularity. Moreover, Englert delivers a variety of classic concealed and thru-fastened wall surface board methods, that can be installed horizontally or up and down for all types of industrial and business use.

Englert ACM wall surface individual panels are around for use within a few diverse apps:

Rainwater Screen System – A sequentially installed wall structure solar panel that employs an integral highlight strip and adaptable accessory technique.

Drenched Joint System – A sequentially installed flush caulk joints wall structure board system by using a staggered slipping clip.

Dried out Gasket Joints System – A sequentially put in dried out seam walls panel system with integral climate hidden and stripping fasteners.

Watch the recording

Effective at helpful a variety of geometric designs, Englert ACM wall surface sections give designers the chance to use a lot more innovative and inventive patterns. One can choose from various standard and customized shades, all in the superior Kynar 500? PVDF resin-based layer.

Englert’s complete brand of aluminum composite wall solar panels might be formed to support the simplest and a lot intricate geometry, which includes figure. The walls sections are created to satisfy all suitable ASTM assessments, and for affect opposition.

The steady sandwich board manufacturing

Polyurethane heat retaining material sandwich sections (rock wool composite sections) can be a new generation decorative wall structure roof and material material envelope, is regarded as the well-known out there a new generation of stainlesss steel building material. It features a constructing envelope and insulation that part, far more elaborate part, is a collection of envelopes, new and decorations wall heat retaining material building materials. Polyurethane composite table equipment features and functions of polyurethane heat retaining material composite panel creation range equipment units consecutively, is definitely the incorporation of mechanized, electric, chemical, hydraulic, temperature and pneumatic management and many other technological innovation by shaping, laminating, cutting and uncoiling preheat , stacking, curing, conveying, foam, cutting and cooling, packing multi purpose automatic generation line.

The Key Framework of Ongoing pu sandwich panel machine:

Board from the continuous sandwich panel production lines are a composite composition made up of two additional facings along with an insulating key. The key could be adaptable with Polyurethane, Nutrient Wool, Cup Wool, PIR, Phenolic or EPS. According to customer’s requirement with pre-painted steel sheets, PVC sheets, Aluminum paper or other similar supports, various profiles are available;

The ongoing sandwich solar panel production series features a large scale manufacturing potential. It allows a standard submission of the reactive mixture, a homogeneous occurrence, perfect physical and mechanical qualities. ;

Roof top panels, wall structure individual panels and doorway individual panels are created mostly of metal portion polyurethane and support insulation mass;

The ability from the ongoing line is 3-7m/min, length of the creation lines are 100m, the size of the final panel is 3-18m lengthy, 900-1200mm vast, 20-150mm thicker, the legitimate duration of twice belt conveyor is 24m, the entire strength is 300KW;

Associated Information

Ongoing pu sandwich solar panel machine May Go the Way of Vitality Emission and Conservation Lessening

Proper Variety and Lubrication of Ongoing pu sandwich panel machine Products

Power Examination concerning the Ongoing pu sandwich board machine Components

The Major Negative effects of the Lining Board of your Continuous pu sandwich panel machine

A panel packaging machine for EPS PANEL the joint

Hence, after the window panel has become put from the groove Identification of the closing strip 5, the securing lip I2 is induced to return to its standard closing situation shown in Statistics 2 and 1, sometimes by withdrawing the instrument I8 of Figure 4 or admitting atmosphere to get rid of the vacuum within the passageway I3 of Shape 4, or by releasing compressed air from the passageway I3 of Body 4a. The window installation in general then shows up as demonstrated in Shape 8.

While in installation, the available comes to an end from the passageway I3 within the securing strip 5 may be shut and produced air-tight by cementing or vulcanizing the opposite finishes of the securing strip 5 in which they abut one other, as displayed at 5a in Shape 8. It has also been discovered feasible to close the passageway I3 sufliciently for that purposes of the present creation of panel packing just by slicing the sealing strip to some span above its necessary span, for instance about one particular quarter inches over needed. Once this exceedingly very long securing strip 5 is forced in the panel launching, the ends 5a are compressed jointly through the strength in the securing strip 5, securing the joint between them.

As the invention of panel packing demonstrated in Numbers 5 to ‘7 comprehensive, the securing strip 30 is created by extruding rubberized or other appropriate material to the ideal condition. so as’to offer a body segment 3| possessing a underside wall surface 32 furnished with a core slot 33 for getting a rib 34 with a structure member or perhaps the like as at 35. The frame associate 35 may make up the channel percentage of a windows starting which is furnished with downwardly extending flanges 36 as displayed in Body 5.

The body portion 3| from the closing strip is supplied with a pair of window pane receiving lines 31 set up in parallel spaced relation and explained lines have inwardly guided wall surfaces providing securing lip amounts 38 the same as the securing lip amounts II and I2 in the panel wrapping models shown in Statistics 1 to 4a comprehensive. Along side it surfaces 39 of your closing strip are arcuately curved in cross portion and the body portion 3| of your securing strip is provided with longitudinally stretching out availabilities or passageways 40 experiencing opposed indoor curved surfaces 442 and . The inside curved walls 42 are formed to coincide with all the side wall surfaces 39 so as to type an arcuately curved wall surface portion 43 as displayed evidently in Physique

A panel packing machine for EPS,SANDWICH the joint

It is meant to deform the arcuately curved walls II as proven in Physique 4 throughout setting up the window panel I by means of a tool or perhaps the like as at I’8 using a aimed segment I9 for interesting the key area of the walls I I and discouraging and flexing stated wall structure in an attempt to force the sameinto the main section |4 of the launching I3. The device I8 is supplied by using a deal with 20 to assist in the manipulation thereof and stated resource is supplied with a curved section 2| conforming in shape to the curvature between the main segment I4 in the opening and the increased section I4 thereof (Shape 4). arcuately curved wall surface I I is forced into explained opening I3, among the mouth I2 is going to be flexed from the route and positionshown in Body 4 in an attempt to aid the placement in the window Dane or panel I. When the instrument I8 is launched, the securing lip I2 presumes its standard placement as shown in Body 2 in order to grip the pane or panel I beneath a little tension by explanation of the point that the lips I2 are guided inwardly and generally shaped in this fashion. It can as a result be seen that this mouth area I2 will likely be presented a bit spread out when the pane or panel I is loaded as displayed in Body 2 so as to place the arcuately curved walls II beneath a minor pressure that is enough to result in said lip to stay in place preventing the lateral displacement of your cup pane or panel I.

As shown in Figure 4a, the sealing strip 5 has been deformed by inflating the longitudinally extending passageway I3 by subjecting the same to air under pressure by any conventional device, such inflating devices being well known as, for example, for inflating basketballs, footballs and the like. As soon as the sealing strip is deformed as proven in Physique 4a, the arcuately curved wall structure I1 is flexed to take away one of each of the sealing lips II and I2 in the standard situation proven -in Body 3 to ensure the glass pane or panel I may be easily inserted to the groove I0 without having to use clamping or retaining gadgets which has heretofore been the usual customized.

When the glass pane I is placed and also the longitudinal passageway or launching I3 is deflated As the in the opposite way to the cost of living, by any standard device as above mentioned, said securing strip will think a job displayed in Figure 2 so as to result in the lip area I2 to contactuall take part the glass panel I and eal the joints in between the panel fellow member 6 and pane ‘I.

The sealing strip will be deformed in a manner similar to the showing in Figure 4 and the inner wall I6 will be deformed so as to assume a position within the extruded portion of the opening as at I4 if the longitudinal opening I3 is evacuated as by means of creating a suction therein.

assisting transportation and storage of the modular panel-packing container

4. The modular panel-packing pack as stated in declare 3, where each of explained very first sockets is provided with a minumum of one initially coupling associate, said bottom wall simply being rectangle-shaped and being supplied with a minimum of two 2nd coupling associates hooked up respectively and removably to explained very first coupling people in stated initial sockets, mentioned foundation encircling wall surface which includes several initially sidewalls connected correspondingly to a number of sides of stated bottom wall structure, each of stated initial sidewalls possessing two opposing finishes each and every furnished with a third coupling associate, any two adjoining ones of said finishes of stated very first sidewalls being interconnected removably by two corresponding types of stated next coupling members, mentioned top rated include including a rectangle leading wall surface and a number of secondly sidewalls hooked up correspondingly to 4 ends of said best wall structure, all of explained secondly sidewalls possessing two opposite finishes every given a 4th coupling associate, any two adjacent kinds of mentioned stops of said next sidewalls simply being connected removably by two corresponding versions of stated fourth coupling people.

5. The modular panel-packing package as reported in declare 4, whereby each of mentioned initial and 2nd coupling members is L-molded, every one of explained initially coupling members being adhered to mentioned underside sheet and a corresponding certainly one of mentioned first side linens, each of stated next coupling associates simply being adhered partially to said bottom wall and getting a percentage perpendicular to explained base walls.

6. The modular panel-packing container as claimed in claim 5, wherein explained initially,third and second, and 4th coupling associates are loop and hook fasteners.

7. The modular panel-packing pack as stated in assert 6, further comprising two 2nd partitioning units, all of said next partitioning devices including a 2nd plug formed having a plurality of second put slot machine games, and a minumum of one secondly partitioning member having a plurality of 2nd partitioning plates every inserted right into a corresponding among mentioned secondly insert slot machines in stated next socket, explained next partitioning dishes defining a plurality of 2nd spacer slot machine games, explained next spacer slots in one of said second partitioning units simply being aligned respectively with mentioned second spacer slots within the other of said second partitioning units, in order that the panels are disposed in between mentioned 2nd partitioning units, and lengthen respectively into said 2nd spacer slot machines in either of said secondly partitioning products.

the manufacturing facility generating the panel packaging machine with film panel show panels

[16] As defined previously mentioned, the present creation offers an panel product packaging collection for horizontally packing a thin film display panel, which can be made to ensure a stacking framework 100 plus a seats work surface of the sitting stage 200, contacting a received slim film show panel, are shaped to match the slender film screen panel in an attempt to safely transport and move the panel, and that is created to ensure the stacking structure 100 as well as the seating move 200 have distinct densities to face up to outside shocks. Thus, according to this invention, it is easier to handle and material costs are lower, thereby manufacturing costs are low and the panel packaging line is very economical, in comparison with a conventional packing box.

[17] Further, this invention fails to makes use of yet another guarding system to safeguard a drive circuit that is presented on the back surface of the slender film exhibit panel M, in contrast to the preceding artwork. Thus, this innovation gets rid of problem and annoyance as a result of utilisation of the further shielding system, although flawlessly realizing a panel packing work and sufficiently absorbing shocks created during extended-range transport. A recess 210 is supplied to stop disturbance using the generate circuit Ml which can be provided in the back surface of the thin film show panel, therefore avoiding the drive circuit Ml from being ruined. [18] Moreover, it really is easy to variably modify the quantity of layered packing panel packing linees. The present creation is capable of raising the volume of lean film screen individual panels that could be loaded in just one packing panel packaging collection using a predetermined sizing, as a result minimizing the quantity of shipments and transport expenses.

Brief Description in the Sketches [19] FIG. 1 is a sectional see to indicate the use of a conventional packing container for panel packaging line a lean film exhibit panel; [20] FIG. 2 is a perspective view to show an panel packaging line for horizontally packing a thin film display panel, according to an embodiment of the present invention; [21] FIG. 3 can be a point of view look at to indicate their state the location where the panel packing panel wrapping linees with this invention are layered; [22] FIG. 4 is actually a sectional perspective to indicate the state where the panel packing panel product packaging linees on this creation are layered; [23] FIG. 5 is a perspective view to show reinforcing pins which are provided on the panel packaging line for horizontally packing the thin film display panel, according to this invention; [24] FIG. 6 is a point of view see to indicate the state where the panel packing panel product packaging linees finding the strengthening pins of the creation are layered; [25] FIG. 7 can be a sectional look at to exhibit their state in which the panel packing panel packing linees having the reinforcing pins of this invention are layered; [26] FIG. According to this invention; [27] FIG, 8 is a perspective view to show reinforcing bars which are provided on the panel packaging line for horizontally packing the thin film display panel. 9 can be a sectional perspective to demonstrate their state the location where the panel packing panel packaging linees having the reinforcing bars with this technology are layered; [28] FIG. According to another embodiment of the present invention; [29] FIG, 10 is a perspective view to show panel packing panel packaging linees which are laterally coupled to each other. 11 is a perspective view to show panel packing panel packaging linees which are laterally coupled to each other and are provided with reinforcing pins, according to another embodiment of the present invention; and [30] FIG. 12 is a partially cutaway perspective view to show panel packing panel packaging linees which are laterally coupled to each other and are provided with reinforcing bars, according to another embodiment of the present invention.

the manufacturer generating the panel packaging machine with film panel screen panels

[16] As detailed over, the present creation offers an panel wrapping line for horizontally packing a thin film display panel, which happens to be built so that a stacking framework 100 along with a seats surface area of your seats phase 200, calling a acquired slim film exhibit panel, are established to correspond to the slender film screen panel to be able to properly transport and move the panel, and which happens to be made to ensure the stacking frame 100 as well as the seating stage 200 have different densities to resist outside shocks. According to this invention, it is easier to handle and material costs are lower, thereby manufacturing costs are low and the panel packaging line is very economical, in comparison with a conventional packing box, thus.

[17] Additional, this creation fails to makes use of an additional guarding model to protect a drive circuit which is supplied over a back surface of the thin film show panel M, in contrast to the preceding art. Hence, this technology removes complication and annoyance as a result of using the more guarding model, although flawlessly knowing a panel packing function and adequately taking in shocks created in the course of very long-length transportation. A recess 210 is provided to avoid disturbance with all the travel circuit Ml which is offered in the again surface of the slender film screen panel, hence stopping the generate circuit Ml from becoming damaged. [18] Additionally, it really is easy to variably modify the quantity of layered packing panel packaging linees. The current technology can do increasing the volume of slim film screen sections that may be packed in a single packing panel wrapping range using a predetermined size, therefore lowering the quantity of shipments and transportation fees.

Brief Description from the Drawings [19] FIG. 1 is really a sectional perspective to show the use of a conventional packing box for panel packaging line a slender film exhibit panel; [20] FIG. According to an embodiment of the present invention; [21] FIG, 2 is a perspective view to show an panel packaging line for horizontally packing a thin film display panel. 3 is really a viewpoint see to indicate the state where the panel packing panel packing linees of the innovation are layered; [22] FIG. 4 is actually a sectional look at to indicate their state in which the panel packing panel packing linees of this creation are layered; [23] FIG. 5 is a perspective view to show reinforcing pins which are provided on the panel packaging line for horizontally packing the thin film display panel, according to this invention; [24] FIG. 6 can be a perspective see to demonstrate the state in which the panel packing panel wrapping linees having the reinforcing pins of this innovation are layered; [25] FIG. 7 can be a sectional look at to indicate the state the location where the panel packing panel product packaging linees having the reinforcing pins of this creation are layered; [26] FIG. 8 is a perspective view to show reinforcing bars which are provided on the panel packaging line for horizontally packing the thin film display panel, according to this invention; [27] FIG. 9 is really a sectional see to indicate the state in which the panel packing panel product packaging linees obtaining the reinforcing cafes of the innovation are layered; [28] FIG. 10 is a perspective view to show panel packing panel packaging linees which are laterally coupled to each other, according to another embodiment of the present invention; [29] FIG. 11 is a perspective view to show panel packing panel packaging linees which are laterally coupled to each other and are provided with reinforcing pins, according to another embodiment of the present invention; and [30] FIG. According to another embodiment of the present invention, 12 is a partially cutaway perspective view to show panel packing panel packaging linees which are laterally coupled to each other and are provided with reinforcing bars.

the manufacturer producing the panel packaging machine with film panel screen solar panels

This invention will allow the slender film screen panel to be safely and securely shielded only using the packing panel wrapping line alone without having to use additional safeguarding unit, in contrast to the preceding art, as a result dealing with the difficulties that may arise because of the use of the extra safeguarding device, and lowering a cost-effective problem on the production organization which makes the slender film display panel by means of the half-finished merchandise, as a result boosting price competitiveness.

[14] Another object of this technology is always to present an panel product packaging range for packing a slender film screen panel, which has a means for horizontally packing slim film panel screen solar panels and stacking the packed panels in a number of levels, thus adjusting the elevation from the stacked panels to match the size of a storage area of travelling means possessing various height, and with a method for protecting the thin film screen sections without having a guarding unit or even a partition walls, as opposed to typical packing cases, thus raising the quantity of lean film display individual panels which can be bundled in one packing panel wrapping range, as a result lowering the number of shipments and decreasing transport expenses.

Technical Solution

[15] In order to accomplish the object, the present invention provides an panel packaging line for packing a thin film display panel, including a stacking frame which is open at a center thereof, and a seating step provided inside the stacking frame such that the thin film display panel is horizontally seated thereon. Helpful Effects

the manufacturer generating the panel packaging machine

[9] In the thorough explanation, once the thin film display panel as one half- done product is supplied to an assembly plant, the shielding products assembled to safeguard the lean film screen panel should be removed from the panel, thus simply being complex and inconveniencing companies. More, the guarding unit pulled from the slim film display panel is almost constantly discarded, so that it is uneconomical.

[10] Moreover, the production line creating the slim film exhibit panel and that is a fifty percent-done item have to mount the safeguarding device to each lean film show panel. Because of the output of the safeguarding product, merchandise pricing is elevated, thus lowering value competition .

The width of a space, which is defined in the packing box to receive the thin film display panel, must be increased, because of the protecting unit fastened to the thin film display panel to protect the thin film display panel which is a half-finished product [11] Further. Moreover, considering that a plurality of partition wall space understanding the panel space for storage includes a predetermined breadth, the number of lean film show sections which can be packed within the packing box is limited. Thus, this is certainly challenging for the reason that the amount of shipments as well as the transport prices are improved.

[12] Lean film exhibit solar panels into which sophisticated modern technology is released are frequently exported in another country. As a result, higher transport costs are received because of recurrent shipments. Disclosure of Creation Technical Issue

[13] Accordingly, the present innovation continues to be created keeping in mind the aforementioned difficulties occurring within the preceding art, along with an object from the provide technology is usually to provide an panel product packaging collection for horizontally packing a lean film display panel, that is created so that it is not necessary to moreover deal with the slender film exhibit panel made such as a half-completed item, and it is possible to enter the slender film exhibit panel in to a manufacturing line once the thin film screen panel is segregated coming from a transported packing container, hence improving productivity.

panel product packaging series for horizontally packing a slender film

[3] This kind of lean film show panel often is available into the industry as one half-finished product or service. That is certainly, the slim film show panel will not be exported as a completed item but is exported as one half-completed item which can be divided in to a unit plus a covering, for inexpensive functions. Afterwards, the item is built inside an importing nation.

According to production conditions, [4] As such, a thin film display television may be produced in an intermediate manufacturing factory, in the form of a thin film display panel module which is a half- finished product and has only a glass substrate, a drive circuit, a power supply, and a video card. Otherwise, the slender film exhibit tv might be generated such as a finished product or service equipped with a Tv set receiving established (tuner), a lecturer, yet others.

[5] The thin film display panel may be broken or damaged by even small vibrations or shocks during transportation, because of the properties of the thin film display panel which is thin and has a large screen. Additional, malfunctioning electrodes and partition wall space, or foreign resources may cause the failure of the push circuit.

In order to more safely transport the thin film display panel, as shown in FIG, [6] Thus.

1, a standard box for packing a thin film display panel incorporates a primary system 1 and a protect 2. Partition surfaces 3 are supplied at normal time periods to ensure that lean film screen individual panels M generated as a half-done product are saved in an area based on the principle system 1 and also the cover 2.

[7] More, extra shielding products 4 are made to protect generate circuits Ml offered on again surfaces and exterior circumferential types of surface in the slim film screen sections which can be held in the packing package and so are made as a half- concluded product or service. The guarding units 4 are built to become attached towards the back again areas in the slender film screen sections. In this status, the slender film exhibit panels are stuffed from the packing package to get offered to some client.

[8] Such a packing method may be useful in the way it is where item is provided with an consumer in the form of a finished product. The packing method is unsuitable for packing the thin film display panel which is a half-finished product, however.