Home » Tube packaging machine » steel tube bundling and packaging system

steel tube bundling and packaging system

The autoamtic steel tube packaging line for handling following steel tubes.

 

steel tube bundling and strapping machine

Steel tube packaging line with strapping machine

Material for  Fabrication of  Reflux Condenser  (FFC) Tube Bundle
S.No. Description Material Unit Quantity Required Unit Price
Rs.
Inclusive of GST
Total Price
Rs.
Inclusive of GST
1 3/4″ PL x 8 3/8″ x 7′-3″ LG-Tube & Plug Sheet SA-516-70N No 4
2 1/2″ PL x 4 3/4″ x 7′-3″ LG – Wrapper Plate SA-516-70N No 4
3 1/2″ PL x 4 3/4″ x 7′ 1/8″  LG – End Plate SA-516-70N No 4
4 1″ O.D x #14 BWG x 16′-0″ LG. Tubes C/W 5/8″ High x 10/IN. L-Footed Fins SA-179 No 150
5 1- 1/8″ O.D X 3/4″ LG. Hex Shoulder Plug SA-105N No 300
6 1- 3/8″ O.D x 1-1/8″ I.D x 1/16″ t Gasket Soft Iron No 300
7 4″ – 150# RFWN FLG.  (SCH. 160 BORE) N2 SA-105N No 2
8 4″ – SCH.160 (0.538″) Pipe x 5 7/8″ LG-N2 SA-106B No 2
9 1″ – 6000# NPT SCRD Full Coupling C/W Plug-C1A/B SA-105N No 2
10 3/4″-6000# NPT SCRD Full Coupling C/W Plug-C2A/B, C3A/B SA-105N No 4
11 14″ BRK’N CHAN X 1/4″ THK C/W 3″ FLG’S x 15-9 1/4″ LG-Side Frame SA-36 No 2
12 1/4″ Pl x 6″ x 6 1/2″ LG-Front & Rear Header Clips SA-516-70N No 4
13 1/2″ Dia x 1 1/2″ LG. Hex Bolts C/W Nuts SA-325 No 16
14 L  2″ x 2″ x 1/4″ THK x 7′ -1″ LG- Upper Brace SA-36 No 3
15 3″-1 Beam @ 5.7  #/FT x 7′-1 1/2″ LG. Lower brace SA-36 No 3
16 #12 GA Pl Formed Angle 3″ x 4″ x 7′-1 1/2″ LG SA-36 No 1
17 #12 GA  Pl Formed Angle 3″ x 2″ x 7′-1 1/2″ LG SA-36 No 1
18 #12 GA Pl Formed Angle 4″ x 4″ x 7′-1 1/2″ LG SA-36 No 1
19 #12 GA  Pl Formed Angle 3-1/2″ x 2″ x  7′-1 1/2″ LG SA-36 No 1
20 1/2″ PL x 5″ x 7′-2″ LG- Pass Plate (Front Header) SA-516-70N No 1
21 Name Plate Bracket C/W S.S Thermo Tech Name Plate SA-516-70 No 1
22 1/2″ DIA. x 1 1/2″ LG Hex Bolts C/W Nuts SA-325 No 8
23 1/4″ THK x 2 1/4″ x 6″ LG – Brace Bolt Plate SA-36 No 4
24 6″ – 150 # RFWN FLG (SCH. XH BORE) N1 SA-105N No 1
25 6″ – SCH . XH (0.432″) PIPE X 5  1/2″ LG -N1 SA-106B No 1
Remarks:- standard material as per specification is required.
In this regard strict compliance to high quality standard material needs to ensure. MTC is also required.