film tension in wrapper


At present, one of the methods to improve the performance of fpc1 is metallic resin. Because it is a multi-layer film combining lower cost and higher level metal layers, the competitive high performance stretch film can be created.

Fpc1 application also has two basic methods to apply fpc1 to load. Hand stretch film rolls are lighter and shorter than machine rolls, and are more convenient for users to use. In high-volume computing, the preferred method is the machine film, where fast and consistent packaging is needed. Machine wrapping with stretch film

Fpc2 requires an operator to complete the process, and the first thing he needs to do is fix the film on the load and then expand the fpc1 when he turns around. The tension required to apply the tension to the film also needs to be done by the operator so that sufficient packaging force can be ensured to accommodate and unify the load. Since the operation of the stretching film must be performed by the operator, the size and weight must be limited, which is limited to ease of use. Therefore, the width and length of the handbag are generally shorter, so that the weight can be limited. This approach is usually used only in low-volume applications

Wire wrapping machine is able Significantly reduced the cost of consumable film and labor cost, The wire coil wrapping machine can use any kind of packing material in the market. There are solutions for wrapping machines (PVC, PE, etc.) for coils of LRPC Strand and LRPC wire. For stretch film using, compared to some loads, such as those without PRE stretched thin films. Fpc5 films can easily get 6-12 months of capital expenditure. Uniform stretching is not provided when tension or braking is used, so its performance cannot be repeated every day. This can lead to intermittent load failures. Since pre-stretching is more controllable than after stretching, the ideal is to maximize pre-stretching. How does the film come to the preview? The gear ratio of the gears is related to the diameter of the roller, and it is elongated mechanically between the two rollers to stretch the film. The surface rotation speed of the secondary roller is faster when the surface rotation speed of the secondary roller is compared with that of the main film. So what is post-stretching? The tension between the film tension and the loaded load is elastic stretching. If the film tension is stretched, the stretch will be increased by you.
Comments are closed. Posted by: stretchwrapping on

Tags: , ,