Electric Elements for tube packaging line

6)Electric Elements

Electric powered sections installed within a steel enclosure with security IP41

Feedback disconnect with exterior accessibility

Components as contactors , relays , circuit breakers , disconectors switches , should be constructed by Schneider or Siemens , frequency Inverters by ABB, PLC produced by Siemens Series : S 7 -300 / 400

Digital DC electrical drives Siemens 6 R A 70 Series if applicable

All control voltage outside of principal panel should be 24 V DC.

All gadgets should be made as outlined by IEC Standards

7)Hydraulic and pneumatic

In the event of use these devices they must be of well kwon brand names

8)Sketches and Information

Preliminary time schedule showing the primary occasions needs to be informed.The provider need to indicate in a time schedule with the levels in the devices development. See instance within the connected file.

All paperwork concerning all methods associated with this machine has to be deliver.

All screens should be elaborated considering the Portuguese language.

All sketches can be carried out using The english language words

9) Manufacturing Rate

The gear need to permit per month manufacturing rate of 1000 t. The supplier need to think about a functioning period of 21 hrs a day and 20 times each month.

10) Data files attached

i. Two Collor Standards

ii.Illustration of Time Timetable

The gear must be fabricated consideringthe very best specifications of operating effectiveness.

The supplier must show currently schedule all the levels of the gear building. See example inside the attached file.

11) Copper tubes

Diameter: 35 ┬ĘC 120 millimeters

Size: 5000 millimeters

Comments are closed. Posted by: stretchwrapping on

Tags: , , ,