A wrapping machine based on special designing

The line consists of an automated program for picking up pipes out of the storage containers used to carry them from the extruder equipment to the packing series. To stop the device from becoming overflooded, the plumbing are then split into smaller batches and after that singularized on specailly created conveyors in which they may be flattened out and formed to the pre-programmed batches to get packaged. The batches are then independently taped employing stretch film to make sure that they generally do not diminish or wide open out throughout the wrapping stage.

For example, the line are prepared for piping starting from 20 millimeters in size around 90 mm as well as the optimum span is 4000 millimeters. Packing potential is 300 sub-bundles hourly of any tube sizing (packing approximately 300 bundles that contain 25 x 20 mm diameter plumbing each hour).

A specially engineered machine which inserts the pre-well prepared bundles in to a sleeve-like polythene pipe which is then tucked within the package and sealed in the comes to an end with tacky tape (also, it is possible to weld the ends in the hose utilizing a heating close off if required).

Before it is automatically stacked into a skip or made into a bundle ready for strapping, a label is applied automatically to the end of each bundle.

The fishing line is split to the subsequent main segments:

Machine C automatic bundling and packing series for round UPVC plumbing ? 20 mm to ? 90 mm

1Sequence conveyors for reloading total skips / come back of purged skips

2 Process for automatically unloading plumbing from the skips using specially designed angled lifters

3Rake and conveyor belt program disentangling plumbing and initial separation

4Sling program and conveyors for breaking up water lines

5Level planning with flattening and area containment

6Singularizing unit with pinchers and likely conveyors for solitary profiles

7Silo for reloading specific bundle and profiles creation

8No. 3 top rated taping equipment for binding the bundles

9Jogging ray for bundles with weighing scales

10No. 2 models for placing bundles into polythene place with intelligent decreasing in the ends

11Foldable and taping from the ends in the pack

12Intermediate conveyors of PVC conduit packaging line

13Automatic lable application and printing

14Intelligent formation of layers of bundles with pushers and lances

15Hydraulic scissor lances and lifters for grasp package creation

16Chain conveyors for launching ignore to learn pack get out of

17Curler conveyor for master pack elimination with strapping things

18Eelectrical part including management individual panels, electric cabinets with PLCs

Custom answers to your unique process and packing specifications available.

Comments are closed. Posted by: stretchwrapping on

Tags: ,