A panel packing machine for EPS,SANDWICH the joint
It is meant to deform the arcuately curved walls II as proven in Physique 4 throughout setting up the window panel I by means of a tool or perhaps the like as at I’8 using a aimed segment I9 for interesting the key area of the walls I I and discouraging and flexing stated wall structure in an attempt to force the sameinto the main section |4 of the launching I3. The device I8 is supplied by using a deal with 20 to assist in the manipulation thereof and stated resource is supplied with a curved section 2| conforming in shape to the curvature between the main segment I4 in the opening and the increased section I4 thereof (Shape 4). arcuately curved wall surface I I is forced into explained opening I3, among the mouth I2 is going to be flexed from the route and positionshown in Body 4 in an attempt to aid the placement in the window Dane or panel I. When the instrument I8 is launched, the securing lip I2 presumes its standard placement as shown in Body 2 in order to grip the pane or panel I beneath a little tension by explanation of the point that the lips I2 are guided inwardly and generally shaped in this fashion. It can as a result be seen that this mouth area I2 will likely be presented a bit spread out when the pane or panel I is loaded as displayed in Body 2 so as to place the arcuately curved walls II beneath a minor pressure that is enough to result in said lip to stay in place preventing the lateral displacement of your cup pane or panel I.
As shown in Figure 4a, the sealing strip 5 has been deformed by inflating the longitudinally extending passageway I3 by subjecting the same to air under pressure by any conventional device, such inflating devices being well known as, for example, for inflating basketballs, footballs and the like. As soon as the sealing strip is deformed as proven in Physique 4a, the arcuately curved wall structure I1 is flexed to take away one of each of the sealing lips II and I2 in the standard situation proven -in Body 3 to ensure the glass pane or panel I may be easily inserted to the groove I0 without having to use clamping or retaining gadgets which has heretofore been the usual customized.
When the glass pane I is placed and also the longitudinal passageway or launching I3 is deflated As the in the opposite way to the cost of living, by any standard device as above mentioned, said securing strip will think a job displayed in Figure 2 so as to result in the lip area I2 to contactuall take part the glass panel I and eal the joints in between the panel fellow member 6 and pane ‘I.
The sealing strip will be deformed in a manner similar to the showing in Figure 4 and the inner wall I6 will be deformed so as to assume a position within the extruded portion of the opening as at I4 if the longitudinal opening I3 is evacuated as by means of creating a suction therein.
Tags: Downenders, pallet packign machine, Panel packaging line, panel wrapping machine, stretch wrapping machine, turnstile