Automatic cotton PET strapping machine

automatic cotton strapping machine
1. The maximum and Minimum size of the cotton that can be strapping.
—–Actually, there are different size machines, you’d better let us know your size list so that we can offer a proper machinery.
The cotton strapping machine in video is for size: Min. L500x500x300mm Max.2800x1500x800mm
We can provide solution according you size.

2. Speed of the machine.
——App. 40-70pcs per hour

3. The cost. (CIF)
Waiting for your size information.

 

good day! We’re interested in your pipe strapping machine includes pipe counting, binding, and wrapping machine for the following pipes.
Please note that there is a bell at the end of each pipe, which increases its diameter.
This adds approximately 3 to 4mm in diameter to the pipe’s diameter.
kind regards,
Nominal O.D.mm) Packing quantities(strip/bundle
Ø20 + 3mm bell 25
Ø25 + 3.5mm bell 20
Ø32 + 4mm bell 10
Packing pipe length 3m
Dimension L×W×H 11.5m×1.5m×1.2m

automatic wire coil strapping machine

Automatic wire coil compactor

We are interested in this automatic wire coil strapping machine quotation can you please give the breakup of the quotation.

We have to clarify that all three systems including in the quotation.

  1. Automatic conveyer system
  2. Automatic compacting and strapping
  3. Automatic wrapping

Is this possible to install this system in 3 stages not at once. Also is it possible  PLC system to be design to extended other system after installing Automatic compacting and strapping.

 

After team discussion, following is our suggestion.

 

Since there is a spool in the ID of wire coil, no only compacting process should be considered, but also taking off the spool.

 

If only for wire coil compacting and manually strapping required: time is from 00:00 to 00:25  

 

It is better to have a spool take off function on automatic strapping machine, the time is from 00:26 to the end

 

automatic cotton strapping machine and fiber strapping machine

automatic cotton strapping machine

automatic cotton strapping machine and fiber strapping machine was designed to strap the package with PET material. The machine can be designed with 2-8 strapping head to help you finish the strapping job at one time in high speed.

There are strapping head, drawing head and control system which is programmable  for strapping position, strapping tension and time.

It can be connected to you online packing system to help you release the manually job by strapping tool.

You can earn the money back in very short time since the machine is able replace 5-6 operator in strapping at least.

Welcome to contact with our team for more strapping information.

Besides there are more automatic strapping machinesystem work for different package onlin.

 

Steel wire coil wrapping machine

NOTE: PLEASE SEND US BY EMAIL OR FAX YOUR ORDER CONFIRMATION 

Item. Quantity Unit DeAcero Code Description Revision Number Unit Price Amount % Disc. Shipping Date
1 1.0000 SET 39881123 STEEL WIRE COIL WRAPPING, JINGLIN PACKAGING MACHINERY CO. LTD, GD700 0 38,500.0000 38,500.0000 0 12/Mar/2017
Important Requirements
1.-PLEASE IDENTIFY AND TAG DEACERO ITEM NUMBER ON EACH ITEM, DOCUMENTS AND PACKAGES SHIPPED.
2.-PARTIAL SHIPMET ACCEPTED ONLY UPOND DEACERO REQUEST.
3.-PLEASE ACCESS OUR SHIPPING WEB PAGE AT coil wrapping machine ORDER TO COORDINATE
SHIPMENT. FOR QUICK
4.-INVOICE MUST BE ALSO SUBMITTED AT SAME WEB PAGE, IN ORDER TO PROCESS PAYMENT IN DUE TIME.
5.-Partial Shipment accepted only upon Deacero Request
6.- Please send the Original CERTIFICATE OF ORIGIN document signed to following address:

automatic coil packing machine and tapping machine

automatic coil packing machine

info@shjlpack.com
www.shjlpack.com
Providing automatic packing solution for coil wrapping and coil tapping by customized solution.
Control by PLC&HMI, automatic BOPP adhesive tape tapping machine, automatic positioning system.

It also calls coil stretch wrapper, coil packing line and automatic coil wrapping machine

 

coil stretch wrapper testing and checking

Coil Weight = 32 MT (72,160 lb)

Coil OD = 1000 to 2060 mm (40 in to 80 in)

Coil Width = 900 to 1700 mm (35.4 in to 66 in)

Coil ID = 610 to 760 mm (24 in to 30 in)

Production Rate = 6 Coils per hour

Power -3 Phase 440 VAC 60 Hz

Control Voltage -24 V

Inspection Checklist

coil Stretch Wrapper -RAL 1033 Dahlia Yellow

Blocker Rolls -RAL 5017 Traffic Blue

Track Frames -RAL 5017 Traffic Blue
Verify paint colors
For shipping, exposed stretch wrapper machine surfaces must be protected with Tectyl 502-C or equal
No paint on surfaces contacting grout (primer ok).
Verify anchor bolt locations and size
Wrap minimum OD coil with minimum ID and maximum width
Wrap maximum OD coil with minimum ID and maximum width
Wrap with VCI paper
Wrap with VCI plastic
Verify component voltages
Verify production rate
Installed keyed switches and verify functionality (supplied by SES)
Questions
When will we receive packing lists?
How will the machine break down for shipping?
How will parts be labeled for shipping and re-assembly?
When will we receive final drawings (ACAD and PDF format)?
When will we receive manuals?

 

 

Automatic Pipe feeding and bundle making machine

 

 

Thanks for your quotation.
I attached some photos of our pipes and a video. You can also see our bags type.
We can adapt the dimension of our bag’s roll with your machine, but the thickness of the bag is important for us.
I have some question about your quotation.

1- Can we use the automatic pipe feeding according to the photos and video that I send from our pipes?
2- Please determine the dimension of your machine.
3- You have different types of bagging machine and I watched some video of them. Please determine the video link of the bundle making machine that you send me it’s quotation.
4- We have more than 20 extruders and we should estimate the quantity of our packing machine. Can you determine the packing rate of your machine for each rows of the pipe’s table?
5- Can we keep the thickness and material of our bags when we use your bundle machine?

 

There are bundle orbital stretch wrapper and stretch wrapping machine too.

installation of the panel packing machine

automatic PET strapping machine

Machine installation
1、The panel packing machine is consisted with front conveyor line, hot cutter, shrink machine, exit unpowered conveyor roller, electrical cabinet etc.
2、Assemble the above-mentioned spare parts at proper position according to the . And then install the auxiliary parts. Finally adjust the relative position of the components after all parts being installed.
3、In principle, the shrink machine part should be treated as the benchmark when adjusting the relative position of above machine components.
4、The placement of above machine parts can be operated as follows:
a. 100mm’s distance left between shrink machine and heat cutter.
b. 100mm’s distance left between front conveyor line and heat cutter.
5、The level height of above components should be in consistent. The level height of shrink machine should be referred as the benchmark when adjusting height of other conveying surface.
6、After all the automatic strapping machine mechanical parts have been installed and adjusted, then connect with power and air source. Terminal row wire connection is adopted for machine circuit; make sure to connect the corresponding wire joints correctly. Φ8mm quick plug is adopted for interior air supply connection, just connect the corresponding pipe joints and plugs properly. Connect the exterior power and air source properly according to attached
7、Prevent against the occurrence of bruise, compression injury, crushing injury, contusion and other accidents during the installation.
8、As the machine has been transported and moved, all flexible parts shall be inspected carefully.
9、The entire installation shall be completed under the condition that the power supply and air supply is cut off.
10、The machine shall be mounted on flat and hard ground. Ground load should be greater than 3T/ m2
11、Only trained personnel can be allowed to enter the installation site.
12、Next working procedure can be executed only after all the installation operations are completed.
13、The panel packing machine shall be mounted in dry and dust free environment.