Strapping machine with spiral orbital wrapper

Panel strapping machine with orbital stretch wrapper
Panel strapping machine with orbital stretch wrapper

 

Dear Mariaelena Garcia,

We have updated our predesign for you. As the load of maximum 300kg load, our engineer think the height -250mm of the conveyor is available. So please check the attached drawing and explanation for spiral orbirtal wrapper.
Here are our answers for you:

1)How we will place the pallets into the conveyor? Since we are transporting the material by hand lift truck, believe we will need to have a platform, or” ramp” right before the conveyor , to climb the pallets . Your ideas or suggestion will be appreciated.
We think a easy solution is making grooves in the conveyors. Just push the fork into the grooves. See the explanation.

2)Your engineer must take in consideration that the conveyor in each side should be maximum 3 MT ( just as the drawing). See the drawing.

3)The maximum distance from the floor we require is 20-25 cm (the reason is the use of a manual lift truck ). See the drawing.

If you have any questions for automatic strapping machine, please let me know. Thanks.

Stretch film horizontal panel stretch wrapping machine

door orbital stretch wrapper
Door orbital stretch wrapper and horizontal wrapper

 

Thank you for your inquiry about our horizontal panel stretch wrapping machine. We need to confirm some information with you in order to serve you better. 1. What is your panel specification? Panel Length(mm) Width(mm) Thickness (mm) Weight(kg) Min         Max         2. What kind of packing material are you going to be used? eg. stretch film, PE, PVC, etc. (fyi-stretch film) 3. What is your requirement of packing speed? Or what is your daily throughput, say 8hours? 4. What is loading and unloading method? By manual or forklift or ? Horizontal stretch wrapping machine -Horizontal stretch wrapping machine can wrap the product by stretch film, PE film or other packing tapes as per your need. However, normally this machine can not pack the head and tail end of the product. If you prefer this stretch film packing machine and also want to wrap both ends of the product, we can provide you a solution-horizontal stretch wrapping machine with a sealing station. The sealing station can cover a sheet of bubble/PE film on the product first, and then horizontal stretch wrapping will do spiral wrapping by stretch film or other packing materials. After packaging, the product can be stored or transported in a good condition. Packing materials: Sealing station:Bubble film or PE film Horizontal stretch wrapping machine – Stretch film or other  stretch film packing tapes (FYI) As a professional manufacturer of packaging equipment, we will offer you a suitable stretch film packing machine and send a quotation to you as soon as possible after getting these above information and your packing requirements.

spiral wrapping machine and orbital wrapper

door orbital stretch wrapper
Door orbital stretch wrapper and horizontal wrapper
What is the measurement (L,W,H) of these steel pieces?
The weight of our products- spiral wrapping machine and film is about 3500-4000kg, which is not a problem. But it seems that our products will fill a 20′ container fully according to our experience. Attached please find a photo for your reference.

Do you have any idea what the weight and CBM will be for both this spiral wrapping machine and product I’ve purchased from you? I’m asking, because I’m trying to determine if you will need all the capacity of the container for your goods.

If using a 20’ container I suspect that your goods will use most of the space (bulk), but that it will not weigh very much. If that is true, would you consider shipping some steel “J” shaped pieces with your shipment to fill the container by weight? If you agree to do this for me, please let me know the weight you can accept and I will ask my other supplier to send that amount of product to your warehouse. I’ve attached a photo from a previous shipment that shows these goods in the left hand side.

Supply of sufficient quantity of all Commissioning and Mandatory Items / spares on F.O.B. basis along with the Plant & Equipment required for start-up and commissioning of the Plant & Equipment and up to the date of Commissioning. The Commissioning and Mandatory Items / spares with proper
L&T Metallurgical & Material Handling
identification mark shall be delivered along with the Plant & Equipment. These Commissioning and Mandatory Items/spares shall be based on Vendor’s experience in commissioning and operation of similar Plant & Equipment. In case Commissioning and Mandatory Items/spares are found to be inadequate during commissioning and subsequent operation of the Plant & Equipment, the Vendor shall be responsible for supplying any extra quantity of Commissioning and Mandatory Items/spares including any additional Commissioning and Mandatory Items/spares that may be required, free of cost delivered at the Project location and in time as required by the Purchaser, such that Commissioning & subsequent operation of the Plant & Equipment is not in any way affected. The Commissioning and Mandatory Items/spares supplied by the Vendor and paid for by the Purchaser shall be the property of the Purchaser only in all events.

Machine Stretch film manufacturer in China

Please kindly find attached PI with beneficiary information.
(the beneficiary”Shenzhen service Ltd” is our agent for LC operation.)
For the custom film size order,our company requires a 50% down payment.
Hope for your kind understanding.
Before confirm the order,please check&confirm with your engineer:
1. The stretch film is used for manual packing or machine packing?
2. Whether the film specification is applicable for your wrapping:
film roll ID:38mm; OD:100mm; width:70mm;thickness:0.025mm

stretch film
stretch film, LLDPE FILM

We are capable providing a machine per your following need.

1. Our wrapping material :

OD 80 m.m.

ID 35 m.m.

Width 100 m.m.

Can use with your machine?

—– ok, It needs $280 only

 

2. Our hose has width 250 m.m. but your machine quote coil width <200 m.m.

Can use with your machine?

—-Yes, it works.

Please check the stretch film machine quotation attached.

May i have your Mobile no., or skype… so that we can following up your need better.

door horizontal stretch wrapping machine

Orbital stretch wrapper for panel and tray
Orbital stretch wrapper series
As per your previous inquiry about door packing machine, what is going on with this project now? Are you still in need of this machine? If so, please answer my following questions. After getting your answers, we will offer you a suitable packing machine.
1. What is your door specification?
Door Length(mm) Width(mm) Thickness(mm) Weight(kg)
Min
Max
2. What kind of packing material are you going to be used? eg. stretch film, PE, PVC, etc.
(fyi-stretch film)
3. What is your requirement of packing speed? Or what is your daily throughput, say 8 hours?
4. What is loading and unloading method? By manual or ?
5. What is you plan of purchasing this packing machine?
6. What is your main idea of door packing machine? Is it mainly used for protecting doors in storage and transportation or selling with a nice package?
7. Regarding packing door, we have two packing solutions for you choosing.
A. Door sealing and shrinking machine
-This machine can seal the door fully after shrinking. The package is pretty nice and tidy. It not only can protect the product from any damage in storage or transportation, but also the wrapped door can be sold on the market directly.
Shrink material: PE Film
(FYI)
-This machine can be semi-auto or automatic. The packing material is stretch film, PE film or other packing tapes as per your need. After packing, the product can be stored or transported in a good condition. However, normally this machine can not pack the head and tail end of the door. If you prefer this packing machine and also want to wrap both ends of door, we can provide you a solution-horizontal door sealing +stretch wrapping machine(bubble film wrap).
 
(FYI)
8. Do you have any requirements about door packing machine?

price of orbital wrapping machine for wire mush

Orbital stretch wrapper
Orbital stretch wrapper for wooden, panel, profile

 

Thank you for your kind email and support very much. After applying to our manager, he agrees to give you 3%discounts based on our quotation for aluminum profile packing machine GG400 and without compromising orbital wrapping machine quality. Hope you can accept this fairest price. Here reattached the quotation, please have a check.

 

Regarding after-sales service, we will offer you our best for orbital wrapping machine. Please check the details as below.

After-sales service guarantee

  1. One year for warranty
  2. Supply the spare parts of the machine for free.
  3. If need, engineers available to service machinery overseas.
  4. Change the broken parts of electric components for free.
  5. Respond and deal with the trouble of the machine within 3 hours after receiving technical supportive requirement.
  6. A new machine will be as a replacement, if the machine still can’t work after maintenance.
  7. 10 years warranty for structure fame
  8. Lifelong technical assistance and support

 

We are expecting to have a pleasant cooperation on this project by offering you a good quality of stretch film machine and establish a good and long term of business relation with your esteemed company.

As one of your cartoon size: L430mm x W420mm x H330mm is a little larger than the standard automatic cartoon erector and bottom sealer package

 

Stretch film bearing packing machine

 

bearing packing machine
bearing packing machine

Hello Tim, I am fine and trust you are too. I am sorry for my late response. Actually, I was waiting for your answers to my questions in the email dated 4th/5. Here I rewrote these questions, please look and reply. 1. Could you please send us some pictures of these components for reference? 2. What is your packing material(tape)? For example, stretch film. Or is it still the black one which you are using on packing bearings? Please advise. We will be glad to receive a pic of your packing material for better understanding. (fyi) (Stretch film) (Black packing tape) 3. What is the weight of the component coil? It will help us to understand the loading capacity of roller system. Coil Width: 150-260mm Coil ID: 150-260mm Coil OD: 300-600mm Minimum weight of the coil (kg): Maximum weight the coil (kg): (FYI-Horizontal coil wrapping machine) It seems that our one set of ZC200 can pack all of your product sizes. But we still need to get these above information before offering you a ZC bearing packing machine series of horizontal coil wrapping machine. Thank you very much. After getting them, I will send a quotation to you as soon as possible.

 

After the discussion with the customer we have decide that the wrapping machine will work with blue stretch foil, so please send the corresponding offer. Also with the offer is important to know which will be the cycle for a tube of 400mm of diameter and 15000mm of length.

Please send the corresponding quotation with the cycle time.

Performance Guarantee Test for coil upender and load inverter

coil upender
coil tilter and coil upender, CHINESE manufacturer

 http://www.fhopepack.com/Coil_upender.html

“FOB” shall mean Free on Board Port of Shipment which shall be delivered, being duly packed, free of expenses to the Purchaser on board of a vessel or air shipment as per the INCOTERMS 2010 or any other latest amendment thereof.
1.17. “Plant & Equipment” shall mean the equipment/items which shall be designed engineered, manufactured, supply, supervision of installation and Commissioning including successful demonstration of the PG parameters by the Vendor for the intended purpose under the provision of the Purchase Agreement.
1.18. “Schedule of Completion” of coil upender shall mean the completion schedule of the Scope of Imported Supply which shall include design, manufacture and supply of Plant & Equipment along with all accessories, tools, tackles etc. to complete the Vendor’s scope in all respects as per the provision of this Purchase Agreement.
1.19. “Commissioning” shall mean the operation of the Plant & Equipment, installed by the Vendor in conformity with the Purchase Enquiry Specification.
1.20. “Performance Guarantee Test” shall mean the coil upender demonstration of the performance guarantee parameters by the Vendor in conformity with the relevant provision of Purchase Enquiry Specification.
1.21. “Final Acceptance shall mean the issuance of the Final Acceptance Certificate on completion of Defect Liability Period or any extension thereof, if any.
1.22. “Defect Liability Period” shall mean the contractual liability period of the Vendor after the completion of Performance Guarantee Test and liquidation of all punch list items notified by the Purchaser.
1.23. “Confidential Information” shall mean shall mean any and all technical and commercial information, including, but not limited to, design, drawings, specifications, data and other information to be supplied to the Vendor, directly or indirectly, by the Purchaser or developed or acquired by the Vendor in performing the Work under the Purchase Agreement, irrespective of whether such information is disclosed in tangible form or via electronic communication.
2. Scope of Work for Imported Supply (Work)
2.1. Complete coil upender Design, Engineering, Manufacture/Procure/fabrication , Control Assembly, Match Marking, Inspection and Testing at manufacturer’s works, painting, packing, supply of all imported Plant & Equipment and related design & drawings on F.O.B port of shipment basis, supervision of erection & Commissioning and demonstration of Performance Guarantee Test (PGT) , fulfillment of Defect Liability obligations and successful handing over to the Purchaser on Final Acceptance at the Project Site as per the Purchase Enquiry Specification (PR No ……………. dated ……………) along with all required General Specification (if any), correspondences, MOMs to ensure the correctness and completeness of the Work in all respects.
The name of the port(s) shall be clearly mentioned by the Vendor.
2.2. Supply of all coil upender Equipment foundation bolts including bolts of special design and those made of alloy/special steels and imported special embedment that may be required for the Equipment on F.O.B. basis.
2.3. Supply of refractory and lining materials with additional quantity, as specified in the Purchase Enquiry Specification or as agreed on F.O.B. basis.

General Commercial Terms of the coil upneder project for Indian Steel

coil transfer coil and coil car
coil transfer coil and coil car

General Commercial Terms and Conditions (Scope of Imported Supply)
1. Definitions
1.1. “Basic Price” shall mean price without any taxes and duties, as applicable.
1.2. “Client” shall mean ………who has signed the Main Contract Agreement with the Purchaser for the execution of the Facilities at the designated Site.
1.3. “Main Contract” is the contract agreement signed between the Purchaser and the Client for execution of the Facilities.
1.4. “Facilities” shall mean the plant, equipment and the associated facilities to be installed and executed at Site under the Main Contract.
1.5. “Project” shall mean the …………………..project at Site for which the Vendor has submitted their techno-commercial and price offer in conformity with Vendor’s Scope of Supply and the requirement of the Purchase Enquiry Specification.
1.6. “Site” shall mean the place of execution of the Scope of Supply by the Vendor under this Purchase Agreement.
1.7. “Purchaser” shall mean the Company incorporated under the laws of India and having its registered office at L&T House, Narottam Morarjee Marg, Ballard Estate, Mumbai –400001,India having its Metallurgical and Material Handling, such as coil tilter, coil upender Independent Company Headquarters at Godrej Water Side, Tower II, 11th Floor, DP – 5,Sector – V, Salt Lake, Kolkata – 700 091.
1.8. “Vendor” shall mean Company incorporated under the laws of India and having its registered office at……………………….
1.9. “Sub-Vendor” shall mean the person, firm or corporation who supplies the Vendor with materials, machinery, tools, supplies, equipment, articles, items and other work or services that are used by the Vendor in connection with the Purchase Agreement, and shall include its legal successors or permitted assignees.
1.10. “Scope of Imported Supply (Work)” shall mean the work to be executed as per the contractual provisions of the Purchase Agreement and in conformity with the Purchase Enquiry Specification.
1.11. “LOI” shall mean the Letter of Intent, issued by the Purchaser about the intension of the Purchaser to the Vendor to enter into this coil upender Purchase Agreement for the intended Scope of Imported Supply.
1.12. “Effective Date of Purchase Agreement” shall mean the contractual obligations as defined in this Purchase Agreement.
1.13. “Purchase Enquiry Specification” shall mean PR No…..dated ……issued to Vendor by the Purchaser (PR).
1.14. “Purchase Agreement” shall mean the complete set of documents as stipulated in the relevant clause, mentioned hereinafter.
1.15. “Price“ shall mean the lump sum fixed price , quoted by the Vendor for undertaking of all contractual obligations under the Scope of Imported Supply of the Purchase Agreement and coil upender Purchase Enquiry Specification which shall have the validity till the Defect Liability Period .

tilter and upender
tilter and upender

Coil upender and handling equipment in India

 

 

This Purchase Agreement No.: ……………dated …… for ……………( Scope of Imported Supply) ………., India hereinafter referred to as “Purchase Agreement”, made and entered into on …….. ….. 20….
By and Between
LARSEN & TOUBRO LIMITED, a Company incorporated under the laws of India and having its registered office at L&T House, Narottam Morarjee Marg, Ballard Estate, Mumbai – 400 001, India having its Metallurgical and Material Handling Independent Company Headquarters at Godrej Water Side, Tower II, 11th Floor, DP – 5, Sector – V, Salt Lake, Kolkata – 700 091, India hereinafter referred to as “Purchaser” (which expression shall, unless repugnant to the meaning or context thereof, be deemed to include its successors and permitted assigns) of the second part;
AND
………….., a Company duly organised and existing under the laws of ……………(Country of Vendor) having its registered office at ……

coil upender
coil tilter and coil upender, CHINESE manufacturer

…………….., hereinafter referred to as “Vendor” (which expression shall, unless repugnant to the meaning or context thereof, be deemed to include its successors and permitted assigns) of the one part;
AND
WHEREAS the Purchaser and the Vendor shall be referred to as a “Party” individually and together as “Parties”;
WHEREAS
A. the Purchaser has decided to build /procure the Plant & Equipment as per the Scope of Imported Supply as defined in the Purchase coil upender Enquiry Specification at ……….. (“Project”) for which Purchaser intends to enter into this Purchase Agreement with the internationally reputed Vendor; and
B. the Vendor has the experience in the field of said Plant & Equipment and know-how related to the execution of the Project and have agreed to execute the Project in accordance with the terms and conditions of this coil upender Purchase Agreement.
C. the Vendor has accepted the Scope of Imported Supply referred to above
D. the Vendor confirms that all items of imported Plant & Equipment shall be supplied by the Vendor are included and covered by the Contract Price.
NOW THEREFORE, in consideration of the premises, the covenants exchanged herein and other good and valuable consideration, the sufficiency of which is hereby acknowledged by the Parties and intending to be legally bound, the Vendor and Purchaser hereby agree as follows: