Be able to provide reliable and high-quality packaging.
* Be able to provide customized machines according to special requirement.
* Be able to provide update and powerful technical support.
*Long-term, reliable and friendly partnership.
Designing for automatic orbital stretch wrapper make equipment can do high tension stretch film packing. 3-sided close off and bubble film wrapping. Nowsupplies theversatility wrapper to close off stretch film with Ultrasonic welding or traditionaltemperaturesealing. With sealer, a door package can close offthroughitemto get atotallymerchandise–free of charge and air-tightseal off. The benefitsincorporateproduct and laborsavings, in addition to film and substancefinancial savings.
Videos for reference:
For long shape small objects packaging, such as: Pipe bundle, tube, profile, section, timber wooden…
For Wide object packaging, such as: Door, window, panel, board
For heavy objects packaging: Such as steel tube, steel rod, aluminum profile, motor, reel…
For wide&height objects packaging, such as, pallet, panels, doors,
I would like to order 1,000 KG’s of stretch wrap with the machine and have it shipped at the same time. I would like to try this reduced amount as a “sample” order to ensure that both the product and the width work well in our application. I trust this is ok, but please confirm?
Your quotation for the machine still shows only “CE” certification. We have been discussing CUL / CSA etc. Can you please ensure that the machine has the correct approval for use in Canada.
I understand that the allowable height will be reduced, but what is the maximum width of product that can be put through this machine? For example: Can I position my produce side-ways effectively making it 26” wide x 22” high if I were to choose to without complications?
Assuming my request for #1 is acceptable, I would like to proceed with the machine and film as per your quotation. Please see attached PO and send me a PI with payment instructions.
Can you confirm the stretch film roll size that you would recommend based on a roll width of 250mm?
Is there a possibility of this orbital stretch machine using 300mm wide rolls? Not that it is necessarily required, but 300mm wide rolls are commonly stocked by our local suppliers and if the machine is able to use this width, that would be advantageous if I were to ever run out of your 250mm material. Please comment.
When shipping the machine / stretch film. Can the machine and film be “palletized” in such a way that it can be loaded / unloaded from the container by fork truck? I ask because after reviewing your drawings, it would appear to me that if the machine would be palletised properly that, I could have the container containing the machine and film shipped to a warehouse in Vancouver instead of direct to me. If this would be possible, I would prefer this as it would help to save me a lot of money for inland shipping to my facility.
We have gotten you your screen. Thank you very much. Now we are facing one problem. Please let us know your thought.
Before getting your screen, we had one door stretch wrapper machine for shrinking your product. Right now, we do not have a suitable stretch wrapper & shrinking machine in stock because that machine has already been shipped to the end user. However, another machine which can shrink wrap your screen will be ready by 15th, May in our factory. Could you please wait till then? Sorry for the inconvenience.
Coil stretch wrapper
But we found there’re two discrepancies with what we discussed previously:
At your request, please find the quotation of our orbital wrapping machine enclosed herewith. You can get machine features and technical data in the quotation clearly. After going through it, please let me know if you have any questions.
At your request, please check the updated quotation of horizontal stretch wrapping machine. I have changed the length of roller conveyors in it accordingly.
Regarding the drawing, I have submitted a proposal to our engineering department. Once I get the drawing with overall dimensions, I will send it to you as soon as possible. Please have a wait.
Thanks for your patience. Since our return there has been many things going on at our facility. Anyhow we had opportunity to discuss your machine at our management meeting and we would like to proceed.
Answers to your questions are as follows:
7.1 – Thanks for offering the ability to wrap two materials, but we have decided that we just require a single layer (Stretch film only).
7.2 – I think rollers would be preferred for the conveyers.
7.3 – Can you change the roller length of the conveyers to 8’ (2,438 mm)
Can you update the quotation if necessary and provide the approval drawings? Can you note specifically the floor area that I need to allocate for the assembled machine?
I look forward to your reply – Thanks,
Jim Sent: April-13-16 5:20 AM
Good morning. Hope all is well.
May I know what is your decision about purchasing the machine and stretch film?
Sorry for not replying sooner. I thought I had replied to you but with all my travels only noticed this morning that indeed I hadn’t
I received your quotation and information. Thanks.
As to my visit. I have time tomorrow April 5th. If you have time this day, I would like to come to your factory between 9:00 and 10:00am. Our hotel is on Nanijing road in the downtown area so I’m note quite sure how long I should allow for travel time which is why I have allowed some between 9 and 10. Is this ok for you?
Please find two videos of film releasing devices attached herewith. Hope they are helpful.
horizontal stretch wrapping machine for Diamond doors
Thank you for your prompt reply very much.
Please find the quotation of our horizontal stretch wrapping machine GG1200 attached. And you can get machine features and technical data in the quotation clearly. After going through it, please let me know if you have any questions.
Some other points about the packing machine, please notice them.
1. If you want to pack some large bundle like 1220×1220mm, we will use our horizontal stretch wrapper GG1800 model. This is a large wrapping machine with a bigger ring than GG1200 model. The cost difference is $15000. GG1800 not only can pack your large bundle but also small panel bundles.
2. Normally, the packing effect for small products like 560×100mm by a large orbital wrapping machine is not so good because the packing material (stretch film) will be loose. However, we will adopt a special material draw-back device on the material roll holding fixture to avoid loose package. I will attached two videos of material holding fixtures with and without material draw-back device for your reference in my following mail, please have a look.
3. No matter GG1200 or GG1800, both machines will have a safety guard to ensure the operator security during orbital wrapping.
4. If you do not have a large quantity of trims to be packed, you can also use both above models to pack them. But, compared with a suitable trim packing machine GG400, the packing speed is not fast and the package is not very tight. Here is a video link of small horizontal stretch wrapping machine GG400 for your reference, please have a look. The ring speed of small horizontal wrapping machine is up to 90r/min much faster than the large wrapping machine.
For additional information, please feel free to contact me.
1 – Please see attached photos showing what we produce. As was mentioned in our conversation I am looking for a machine that will primarily wrap our insulation panels, but will also to a lesser degree be used for wrapping trims. I’ve filled out your chart below on the basis of the insulation panels assuming that at any given time I will bundle at least a few of them, however as you can see from the photos, most times the bundles are almost square.
When determining the opening size of the unit needed for the width + height, As an option, I would like to also explore what the additional cost would be if I were to purchase a machine that can also wrap bundles 48” x 48” (1220mm x 1220mm). I realize this would be a much larger machine and for my immediate needs today this isn’t necessary, but in the future we may have need to wrap bundles this size and so I would like to get a cost difference and your suggestion as to whether or not this is a good idea to consider at this time.
2 – We have typically been using stretch wrap for the covering material.
3 – Our daily volume is fairly low in actual bundles per day that need to be wrapped, however if there is an option for a machine that has faster throughput etc., I would like to consider as I don’t want my staff standing and waiting for a machine unnecessarily long if other options are available.
4 – Both. For most packages, the weight is such that they can be handled by hand and stacked, then moved with fork trucks.
5 – We would like the fully automatic machine. The ends don’t necessarily need to be closed as we have been thinking of placing a cardboard end over each end prior to wrapping. In addition, we would like to include cardboard corners in the middle of the bundles along the length to prevent damage to the product from fork trucks.
Jim Sent: March-23-16 10:22 PM To: Jim Suderman Cc: manager
lin – horizontal stretch wrapping machine for Diamond doors
This is Candice from Shanghai Jinglin Packaging Machinery Co., Ltd. Thank you for your inquiry about our horizontal stretch wrapping machine. For offering you a suitable packing machine, please confirm the information as follows by return.
3. What is your requirement of door packing speed? Or what is your daily throughput, say, 8 hours/day?
4. What is your loading and offloading way? By hand ?
5. Horizontal stretch wrapping machine
-This machine can be semi-auto or automatic. After packing, the product can be stored or transported in a good condition. However, normally this machine can not pack the head and tail end of the product. If you prefer this packing machine and also want to wrap both ends, we can provide you a solution-horizontal sealing +stretch wrapping machine.
As a leading and professional manufacturer of packaging equipment over 18 years of experience, we will provide you a suitable packing machine and send you a quotation to you as soon as possible after getting those above information.
We will be glad to receive your product photos.
Look forward to hearing from you and meeting you in the coming weeks also.